利用C++ Builder实现基于DirectShow的视频捕获

阐述了实现视频捕获与回放的可选方案,介绍了DirectShow的原理,针对传统视频播放与捕获的不足之处,提出了一种基于DirectShow技术的视频播放与捕获软件设计方案。给出了在C Builder环境下开发基于DirectShow技术的实时视频捕捉的步骤,并实现了实时视频捕捉系统,通过实例验证了本系统具有稳定、可靠和较好的通用性及扩展性的特点。     

自由滚转尾翼试飞器滚转特性分析

自由滚转尾翼是解决鸭式布局导弹的鸭式舵难以差动兼作副翼进行滚动控制的一种技术途径.为验证某鸭式布局试飞器采用自由滚转尾翼方案的可行性,进行了试飞器的固定尾翼和自由滚转尾翼两种模型的风洞试验.试验结果表明,固定尾翼试飞器,当鸭舵作副翼偏转进行滚控时,在尾翼上会产生很大的诱导滚动力矩,抵消鸭舵的控制力矩,致使鸭舵不能进行滚转控制;滚转尾翼可有效减小诱导滚动力矩,实现通过鸭舵进行全弹滚转控制的目的.     

传递对准姿态匹配的优化算法

 推导了4种传递对准姿态匹配算法,分析了这4种姿态匹配算法的优缺点,证明并验证了其中的“最优姿态匹配法”在姿态匹配算法中的最优性。首先介绍了传统的“姿态角匹配法”及其改进算法,即“姿态矩阵匹配法”,接着引入了量测失准角的概念,经过理论推导,提出了利用量测失准角进行传递对准姿态匹配的“量测失准角匹配法”。上述3种姿态匹配算法都是在子惯导安装角是小量的条件下推导而获得的,只能适用于安装角是小量的条件,具有一定的局限性。基于此,对“量测失准角匹配法”进行了完善,推导出了一种可在多挂点下使用的现代姿态匹配算法——最优姿态匹配法。从理论上证明了4种姿态匹配算法的相互关系。最后,采用“速度＋姿态”匹配方案进行的传递对准仿真结果表明：4种姿态匹配算法具有相同的估计精度;推导的“最优姿态匹配法”在保证精度的同时,可应用于子惯导安装角是任意角度的情况,具有更广的应用范围。     

跨介质冲压发动机理论性能与工作参数分析

针对空水一体跨介质导弹应用需求，提出了一种采用同一金属基固体推进剂，能够实现在空中和水中工作的跨介质冲压发动机方案。分析了空中和水中典型工况下，金属基固体推进剂配方、空/水燃比、金属种类等对跨介质冲压发动机理论性能的影响。针对给定的跨介质导弹飞行弹道和金属基固体推进剂配方，对发动机设计参数进行了选取，并完成了空中和水中工作条件下发动机工作参数计算，从理论上验证了该跨介质冲压发动机方案的可行性。     

Inverse design of low boom configurations using proper orthogonal decomposition and augmented Burgers equation

Mitigation of sonic boom to an acceptable stage is a key point for the next generation of supersonic transports. Meanwhile, designing a supersonic aircraft with an ideal ground signature is always the focus of research on sonic boom reduction. This paper presents an inverse design approach to optimize the near-field signature of an aircraft, making it close to the shaped ideal ground signature after the propagation in the atmosphere. Using the Proper Orthogonal Decomposition(POD) method, a guessed input of augmented Burgers equation is inversely achieved. By multiple POD iterations, the guessed ground signatures successively approach the target ground signature until the convergence criteria is reached. Finally, the corresponding equivalent area distribution is calculated from the optimal near-field signature through the classical Whitham F-function theory. To validate this method, an optimization example of Lockheed Martin 1021 is demonstrated. The modified configuration has a fully shaped ground signature and achieves a drop of perceived loudness by 7.94 PLdB. This improvement is achieved via shaping the original near-field signature into wiggles and damping it by atmospheric attenuation. At last, a nonphysical ground signature is set as the target to test the robustness of this inverse design method and shows that this method is robust enough for various inputs.     

无人机地面座舱语音控制系统验证平台开发

介绍了一种面向无人机地面座舱的语音控制系统的综合验证平台的设计方案,从系统与实现层面对构成平台的各个组成部分进行了具体功能阐述,并提出了一种动态显示语音指令控件的配置格式,为无人机语音控制系统的测试提供了一种新的解决方案。     

Multi-objective optimal formation reconfiguration with scalarization and stochastic boundaries

A new method is proposed for multi-objective optimal control of satellite formation reconfiguration. First, necessary optimality conditions of single-objective fuel-optimal reconfiguration are studied. Problem of initial guess of the costate and control discontinuity are addressed by using a new developed stochastic based method. Terminal conditions of Two Point Boundary Value Problem (TPBVP) of the optimal control equations are relaxed using augmented Gaussian. Variances or bandwidths of the terminal conditions are set to decision variables to be optimized. Responses of varied initial costate are modeled and propagated using Riccati equation. Using quadratic convolution of relaxed terminal conditions, objective function of the fuel-optimal problem is reformulated into a quadratic equation, and a gradient based optimizer is used to search the optimal initial guess. In the second part of the paper, optimal control of format flying reconfiguration with two competitive objectives:fuel and time of flight (ToF) is studied. With Pascoletti-Serafini scalarization, the Multi-objective Optimal Control Problem (MOCP) is scalarized into a set of weighted Single-objective Optimal Control Problems (SOCP). Hamiltonian and switch function for the weighted SOCP are developed and constructed. New developed stochastic based approach is then used to search the optimal Pareto solutions. Verification and performances of proposed algorithms are demonstrated through numerical simulations of single-objective and multi-objective optimal control of low-thrust elliptical orbit formation reconfiguration. Potential applications of the algorithms to some other preliminary space mission designs are also discussed.     

基于MOEA/D的三锥体拦截器气动外形优化设计

针对由临近空间拦截器飞行环境变化剧烈导致的热流密度过高等问题,提出一种多目标外形优化设计方法,并针对一种新型三锥体临近空间拦截器外形进行优化设计。首先,建立飞行器的气动、弹道、气动热等多学科分析模型,利用高斯-伪谱法计算拦截弹道,利用桥函数法建立气动模型,并利用Fay-Riddle方法估计气动热流密度。然后,以飞行器航程、总热流量和飞行时间为优化目标,采用基于分解的多目标进化算法(MOEA/D)与伪谱法将该问题转化为一组单目标优化子问题,得到Pareto前沿并进行相关分析。最后,给出一个优于基准值,同时满足性能指标要求的新型外形。结果表明:该优化方法具有可实现性,为未来的飞行器设计提供了新思路。     

空间静态配置算法的研究与应用

对嵌入式操作系统设计中的存储空间静态配置进行了分析。在简要介绍空间静态配置基本原理的基础上,重点阐述了静态空间划分的具体实现方法以及空间静态配置系统的设计与组成,并对静态配置算法和动态配置算法进行了对比分析,最后介绍静态空间配置算法的具体应用实例。     

基于北斗三号导航系统的卫星定位技术

对北斗三号体制下的传输链路、接收门限进行理论分析,得出捕获算法采用4次非相干累加,可以使捕获灵敏度达到-130 dBm,同时实现定位时间小于5 min的综合较优结果.接着以低轨太阳同步轨道卫星为例,利用STK建模进行全轨道周期仿真,结果显示全程收星数超过4颗,定位精度达到2.59 m,速度误差为0.00378 m/s....