预移相型恒温热线(膜)流速计的动态响应方程

分析传统恒温热线热膜流速计(简称 HWFA)动态方程后,提出了一种新型HWFA 线路模型——主电桥预移相模型,推导出真实条件下小扰动动态响应方程,并按此原理设计制造了崭新的高性能 IFV—900型 HWFA 样机。该机全部革除了传统HWFA 的三个调节参量,大大地简化了调节步骤;不自激振荡的范围明显增宽,极大地减少了使用上的麻烦;频带宽度比当今世界流行的 HWFA 增宽了2～5倍;加上一系列智能化功能后使自动化程度达到了新的高度。这一新型 HWFA 的问世将可能导至 HWFA技术的重大改进和新的变革。首先阐明主电桥预移相模型的提出和真实条件下小扰动动态响应方程的推导。随后将用若干姐妹篇阐明动态方程频率响应调节元物理值的解析解,频率特性实验分析手段的电扰动试验响应情况的理论分析等内容。     

热膜技术在水流测速中的应用研究

研究了在我国现有条件下，利用普通自来水，在室内和试验水槽中不设调温装置的情况下，热膜技术在水流测速中应用的有关技术问题。并利用从美国TSI公司进口的1050A恒温型热线／热膜流速仪测量了紊动射流和三峡溢流坝模型冲坑中掺气水流的脉动流速及紊动结构问题，获得了成功。     

超音速射流气膜冷却效果的试验研究

以二维平板模型高速导弹头罩上的探测窗口,用电加温产生的热气流模拟导弹飞行时的气动加热,对采用气膜邓控制导弹探测窗口温度的效果及规律进行了研究。着重探讨了气膜冷却临界长度ＬＣ与气膜冷却有效度η随射流缝高Ｓ,喷射率λ及主射流夹角α等参数的变化规律,并总结出一个相关参数及一些经验公式。研究结果与国外有关文献基本一致。     

俯斜墙背条件下朗肯与库伦土压力理论的研究

从挡土墙抗滑、抗倾覆安全系数和挡土墙的主动土压力两个角度，研究建立在朗肯土压力理论与库伦土压力理论基础上的不同主动土压力计算方法所带来的误差，认为在俯斜的挡土墙墙背条件下，应使用抗滑、抗倾覆安全系数来判断土压力计算方法是否合理。     

薄膜电阻温度计原理性误差分析及数据处理方法研究

薄膜电阻温度计是高超声速测热试验中一种常用的传感器,多用于激波风洞中.改进薄膜电阻温度计测热数据的后处理方法,分析其原理性误差,提出修正方法,可以进一步提高热流测量精度,为防热设计提供可靠数据.应用三维热传导理论,考虑热流和温升的耦合影响,计算了气动加热条件下薄膜电阻温度计结构温升情况,得到了铂层内的温度分布规律,并与一维半无限简化理论得到的薄膜电阻温度计表层温度相互对比,得到了模型简化带来的原理性误差;建立了由表面温升计算表面热流的导热反问题计算方法,与经典的Cook-Felderman处理公式和热电模拟网络处理方法相互对比,提出了修止热流值的方法,为提高热流测量精度提供了一种可行的手段.     

空间飞行器姿态的有限时间跟踪控制方法

 针对带不确定项的空间飞行器系统姿态跟踪控制问题,给出一种基于有限时间控制技术的滑模控制方法。使得姿态跟踪误差系统不仅可在有限时间内从任意状态到达滑动面,而且也可在有限时间内沿滑动面收敛到零,并给出了严格的数学证明。为了避免控制律中的颤动问题,一种新的饱和函数被用来代替控制律中符号函数。数值仿真实验说明了该方法的有效性。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

基于双环滑模控制的直/气复合控制系统设计

直/气复合控制导弹具有强干扰、强非线性以及强耦合等特点,传统的姿态控制器难以适用于该种复杂干扰并存的情况,文章提出了基于双环滑模控制的直/气复合控制器。首先采用有限时间收敛趋近律分别构造内外环滑模控制器,并将角速度回路的滑模变量量化为直接力指令,以解决空气舵与姿控发动机之间的耦合问题。接着使用非线性扩张状态观测器估计综合干扰,从而设计控制器补偿侧向喷流干扰及模型不确定性等综合干扰的影响。然后基于李雅普诺夫方法证明了控制系统闭环稳定,分析了干扰补偿对控制器收敛域的影响。最后仿真结果表明,该方法跟踪速度快,动态过程平稳,具有较强的干扰抑制能力,具有很强的鲁棒性。     

Tear Resistance of Orthogonal Kevlar-PWF-reinforced TPU Film

This work seeks to investigate the notch sensitivity and fracture behaviour of orthogonal Kevlar-plain woven fabric (PWF)-reinforced thermoplastic polyurethanes (TPU) film applied to high altitude balloon. Four types of specimens are implemented to measure notched strength and fracture toughness by conducting static tension and tear tests on an MTS system respectively. The damage and failure mechanisms are discussed and the results for notched strength and tear resistance are evaluated and compared with each other. From the experiments, it is found that the notch sensitivity of the film increases with the increase in the size of the hole, but the notch sensitivity and the stress concentration of the notch are insignificant and there is a decrease of only about 4%-10% in tensile strength for the notched specimens with different hole sizes in diameter compared with the unnotched specimen. In contrast, the tear resistance containing a central slit with only 1 mm length is about half of tensile strength of the unnotched film, which implies that the tear resistance exists an significant notch sensitivity. The results of this study provide an insight into notch sensitivity and fracture behaviour of the Kevlar-PWF-reinforced TPU film and constitute a fundamental basis for the design of high altitude balloon.