Multi-GNSS contributions to differential code biases determination and regional ionospheric modeling in China

Due to the limited number and uneven distribution globally of Beidou Satellite System (BDS) stations, the contributions of BDS to global ionosphere modeling is still not significant. In order to give a more realistic evaluation of the ability for BDS in ionosphere monitoring and multi-GNSS contributions to the performance of Differential Code Biases (DCBs) determination and ionosphere modeling, we select 22 stations from Crustal Movement Observation Network of China (CMONOC) to assess the result of regional ionospheric model and DCBs estimates over China where the visible satellites and monitoring stations for BDS are comparable to those of GPS/GLONASS. Note that all the 22 stations can track the dual- and triple-frequency GPS, GLONASS, and BDS observations. In this study, seven solutions, i.e., GPS-only (G), GLONASS-only (R), BDS-only (C), GPS + BDS (GC), GPS + GLONASS (GR), GLONASS + BDS (RC), GPS + GLONASS + BDS (GRC), are used to test the regional ionosphere modeling over the experimental area. Moreover, the performances of them using single-frequency precise point positioning (SF-PPP) method are presented. The experimental results indicate that BDS has the same ionospheric monitoring capability as GPS and GLONASS. Meanwhile, multi-GNSS observations can significantly improve the accuracy of the regional ionospheric models compared with that of GPS-only or GLONASS-only or BDS-only, especially over the edge of the tested region which the accuracy of the model is improved by reducing the RMS of the maximum differences from 5–15 to 2–3 TECu. For satellite DCBs estimates of different systems, the accuracy of them can be improved significantly after combining different system observations, which is improved by reducing the STD of GPS satellite DCB from 0.243 to 0.213, 0.172, and 0.165 ns after adding R, C, and RC observations respectively, with an increment of about 12.3%, 29.4%, and 32.2%. The STD of GLONASS satellite DCB improved from 0.353 to 0.304, 0.271, and 0.243 ns after adding G, C, and GC observations, respectively. The STD of BDS satellite DCB reduced from 0.265 to 0.237, 0.237 and 0.229 ns with the addition of G, R and GR systems respectively, and increased by 10.6%, 10.4%, and 13.6%. From the experimental positioning result, it can be seen that the regional ionospheric models with multi-GNSS observations are better than that with a single satellite system model.     

恒速偏频/机抖激光陀螺惯导系统半实物仿真

提出一种恒速偏频/机抖激光陀螺惯导系统方案。用一个不随偏频机构旋转 的机抖激光陀螺,改善恒速偏频激光陀螺惯导系统在偏频旋转轴方向的载体角速度测量 精度。给出了偏频旋转轴方向等效陀螺采样值的计算方法和关键结构参数标校方法;分 析了纯惯导的系统误差特性,在初始对准卡尔曼滤波模型中,增加了偏频旋转轴方向的 陀螺漂移以及耦合偏差造成的等效北向陀螺漂移作为误差状态。恒速偏频/机抖激光陀 螺惯导系统的半实物仿真实验结果表明：在静基座条件下,初始对准10min 后,方位角收 敛到10″ （1σ） 内; 初始对准20min 后, 纯惯导4h, 北向和东向位置误差最大值均小于 200m。     

如何避免态度测量偏差

从心理学的角度，阐述态度测量过程中影响被调查者作出正确反应的各种因素，并对消除这些因素的影响进行研究，改为进测量设计、提高测量结果的准确性提供依据。     

基于偏置比例导引与凸优化的火箭垂直着陆制导

凸优化由于求解效率高在飞行器轨迹规划和制导中得到广泛研究应用。但是，由于火箭垂直返回制导需要考虑气动力带来的非线性，现有的凸优化求解方法或简单地采取逐次线性化近似凸化最优控制问题，经常出现收敛性问题；或需针对具体问题进行相应的系列凸化剪裁，虽然改善了收敛性，但不同模型的凸化剪裁方法差别很大，通用性较差。为此，将偏置比例导引与凸优化相结合，用以求解存在落角、落速和推力范围约束的火箭垂直返回定点软着陆制导问题。提出的制导方法将该制导问题分解为法向满足落角与落点约束的偏置比例导引，以及切向满足速度与推力约束的凸优化和滚动时域控制制导。在切向制导中，提出利用三次多项式近似飞行轨迹以方便凸优化求解，并建立剩余飞行时间的估算方法以提供给比例导引。仿真结果表明，提出的制导方法能有效满足各种约束，实现火箭精确着陆。与现有的直接采取逐次线性化近似的凸优化方法相比，提出的方法由于将制导进行切向和法向分解，大为简化了凸优化模型，显著提高了求解效率和收敛性。此外，提出的方法无需复杂繁琐的凸化处理，对于一般的推力可控且对末速存在约束的固定终端位置的制导问题皆适用。     

Codes cross-correlation analysis and data/pilot code pairs optimization for Galileo E1 OS and GPS L1C

The Galileo E1 open service (OS) and the global positioning system (GPS) L1C are intending to use the multiplexed binary offset carrier (MBOC) modulation in E1/L1 band, including both pilot and data components. The impact of data and pilot codes cross-correlation on the distortion of the discriminator function (i.e., the S-curve) is investigated, when only the pilot (or data) components of MBOC signals are tracked. It is shown that the modulation schemes and the receiver configuration (e.g., the correlator spacing) strongly affect the S-curve bias. In this paper, two methods are proposed to optimize the data/pilot code pairs of Galileo E1 OS and GPS L1C. The optimization goal is to obtain the minimum average S-curve bias when tracking only the pilot components a the specific correlator spacing. Figures of merit, such as S-curve bias, correlation loss and code tracking variance have been adopted for analyzing and comparing the un-optimized and optimized code pairs. Simulation results show that the optimized data/pilot code pairs could significantly mitigate the intra-channel codes cross-correlation, and then improve the code tracking performance of MBOC signals.     

霍尔推力器分割高偏压电极等离子体放电特性

霍尔推力器通道等离子体与壁面有很强的相互作用,为了降低壁面腐蚀,提高在轨寿命, 针对推力器全通道放电过程建立二维物理模型,采用粒子模拟方法（Particle In Cell）,数值研究了电离区壁面分割高于阳极偏压的低发射石墨电极对推力器放电特性的影响,讨论了放电通道电势、离子数密度、电子温度、电离速率及比冲的变化规律。结果表明：在电离区不同位置分割高偏压电极对等离子体放电特性影响明显,电极位置在电离区前端时,电极偏压高于阳极电压60V时通道内放电等离子体参数几乎不变。而电极位置在电离区末端,电极偏压高于阳极电压18V时就会导致加速区轴向扩张,离子聚焦效果强,电子温度显著升高,电子与壁面相互作用减弱,羽流发散角减小。由此推力器比冲提升约12%,寿命延长,性能提高。     

空基多雷达航迹抗差关联算法

基于高斯随机矢量统计特性,推导出一种适用于探测距离较远、系统误差时变、雷达上报目标不一致等复杂环境的空基多雷达航迹抗差关联算法。分解航迹距离矢量,对消系统误差矢量得出适用于3个及3个以上雷达的航迹抗差关联条件和流程。分别设置了目标密集程度、随机误差和系统误差适应性实验验证算法性能。仿真结果表明所提算法的关联准确性和复杂环境适应性相比现有的基于参照拓扑特征的航迹关联算法（RET算法）和基于距离检测的可信关联算法（confidential算法）有较大幅度的提升。     

基于陀螺和四元数的EKF卫星姿态确定算法

为保证卫星姿态确定的高精度，利用星敏感器提供的姿态四元数，结合扩展卡尔曼滤波（EKF）对陀螺漂移和安装误差进行实时补偿。建立了滤波器数学模型，并通过数学仿真获得了算法的理论精度，同时分析了星敏感器安装误差对姿态确定的影响。     

竞争环境下航空公司航线市场份额的预测方法

分析了在竞争环境下,影响航空公司航线市场份额的因素,从机型、票价和航班时刻3个主要影响因素出发研究了航空公司市场份额预测的方法,通过对实际航线进行调查,分别得出该航线上的旅客对于机型、票价和航班时刻3个主要影响因素的偏好度,以及目前该航线上各家航空公司的航班安排情况,最终预测出各家航空公司在该条航线上的市场份额。     

超燃冲压发动机性能参数测量不确定度分析

以AIAA(AIAA S-071A-1999)推荐的不确定度评估标准,借鉴国内外在风洞试验、航空发动机性能测量、火箭发动机地面试验性能等不确定度分析方面开展的研究工作,建立了符合统计学一般原理的超燃冲压发动机总体性能参数测量不确定度分析和计算方法,开展了超燃冲压发动机总体性能参数测量不确定度进行了分析。结果表明:超燃冲压发动机自由射流试验中系统误差引入的不确定度占主导地位,占总不确定度的90%以上。该研究结果有利于提高超燃冲压发动机总体性能测量精度,为超燃冲压发动机的科学研究和工程设计提供支撑。