A discrete event systems approach to discriminating intermittent from permanent faults

Almost all work on model-based diagnosis （MBD） potentially presumes faults are per- sistent and does not take intermittent faults （IFs） into account. Therefore, it is common for diag- nosis systems to misjudge IFs as permanent faults （PFs）, which are the major cause of the problems of false alarms, cannot duplication and no fault found in aircraft avionics. To address this problem, a new fault model which includes PFs and IFs is presented based on discrete event systems （DESs）. Thereafter, an approach is given to discriminate between PFs and IFs by diagnosing the current fault. In this paper, the regulations of （PFs and IFs） fault evolution through fault and reset events along the traces of system are studied, and then label propagation function is modified to account for PFs and the dynamic behavior of IFs and diagnosability of PFs and IFs are defined. Finally, illustrative examples are presented to demonstrate the proposed approach, and the analysis results show the fault types can be discriminated within bounded delay if the system is diagnosable.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

民用飞机生产线自动控制系统的信息安全问题探析

随着信息化技术越来越多地应用到工业控制系统,不可避免地也带来了各类风险和威胁,系统的信息安全问题也就越发需要引起重视。对民用飞机生产线自动化控制系统存在的安全隐患进行了探究和分析,结合其他领域的工控系统安全措施,针对本系统的一些威胁和漏洞提出了安全风险防范方案。     

脉冲雷达凝视模式下低轨碎片相对运动特征分析

脉冲雷达凝视模式是一种探测低轨小碎片的重要方式,其中低轨碎片与雷达的径向运动关系是碎片统计分析的基础.为推算碎片相对雷达的运动特征,基于坐标系的相互转换,先利用雷达测站信息,得到可见碎片在地惯坐标系下的轨道信息;再逆向将目标不同时刻的位置转换至测站坐标系下,得到目标的径向运动特征.在不同要素（雷达波束指向、雷达仰角、测站纬度、目标距离）下,仿真及对比分析了各个参数对速度模糊度、雷达可见性等的影响,得出在凝视模式下目标相对雷达近似做径向匀加速运动,这为后续试验工作提供有力的依据.     

基于滑模自适应控制的不确定混沌系统修正函数投影同步

研究了一类不确定混沌系统的修正函数投影同步。首先,设计了一类滑模曲面;基于该曲面设计了同步控制器,并采用自适应技术设计了自适应律对不确定参数进行逼近。在一定条件下,该同步控制方案可以实现2个不确定异结构混沌系统的修正函数投影同步。然后,为保证合适的控制量,对控制增益进行了优化。从同步效果来看,所设计的控制器对混沌系统的不确定项的影响具有较强的鲁棒性。最后,数值仿真验证了该控制器的有效性和可行性。     

Periodic relative orbits of two spacecraft subject to differential gravity and electrostatic forcing

Coulomb forces between charged close-flying satellites can be used for formation control, and constant electric potentials enable static equilibria solutions. In this work, open-loop time-varying potential functions, which produce periodic, two-craft, Coulomb formation motions are demonstrated for the first time. This is done in the rotating Hill-Frame, with linearized gravity, and craft position components assumed in the form of simple harmonic oscillators. Substitution of the oscillatory functions into the dynamics, further constrains these functions, and yields necessary potential histories, to produce the periodic flow. The assumed position functions, however, are not arbitrary, since the dynamical model restricts what oscillatory trajectories are allowed. Specifically, a Hill-Frame integral of motion is derived, and this is used to show certain candidate periodic functions to be inadmissible. The system dynamics are then linearized to expose stability properties of the solutions, and it is established that asymptotic stability is impossible for all orbit families. Finally, the degree of instability in the assumed motions, over free parameter ranges, is determined numerically via the Floquet multipliers of the associated full-cycle state-transition matrices.     

人体热调节的有限元分析

本文根据人体的热调节机制建立了二维人体热调节的有限元模型，并设计了相应的实验对该模型进行了验证，实验结果与计算结果吻合较好，本模型对于以人体－环境热交换为内容的工程实践和理论研究有较高的应用价值。     

Formation of Giant Planets– An Attempt in Matching Observational Constraints

We present models of giant planet formation, taking into account migration and disk viscous evolution. We show that migration can significantly reduce the formation timescale bringing it in good agreement with typical observed disk lifetimes. We then present a model that produces a planet whose current location, core mass and total mass are comparable with the one of Jupiter. For this model, we calculate the enrichments in volatiles and compare them with the one measured by the Galileo probe. We show that our models can reproduce both the measured atmosphere enrichments and the constraints derived by Guillot et al. (2004), if we assume the accretion of planetesimals with ices/rocks ratio equal to 4, and that a substantial amount of CO₂ was present in vapor phase in the solar nebula, in agreement with ISM measurements.     

Organizing and managing satellite solar power

Building an organization and management structure to create, launch, utilize and protect a satellite solar power energy system will require a global policy for the beneficial use of SSP. The fundamental organizational tasks are: (1) R&D, achieved through a project organization characterized by the integrated management of applied science, development research and construction engineering; (2) investment, generated by a series of groups creating financial vehicles for public and private investment; (3) transmission and distribution, characterized by attention to an engineering and maintenance process emphasizing high reliability; and (4) crisis response, demanding readiness for instant response to potential internal or external scenarios. A differentiated global organization spanning the long timeframe of SSP will need to have a central management core representative of all parts of the organization, with the capacity for self-renewal and re-adaptation. To be successful over its long timeframe, the SSP organization will need to build continuity and public confidence through intergenerational communication, public education, and community outreach. Integrating structures must be created at all levels of the organization, and should encompass joint work tasks and information-sharing among both industrial and government members. Developmental and alliance partners who support the formation and financing of a differentiated satellite solar power organization will share commensurately in the technologies and competencies that are created.