高温压力传感器冷却套温度场的有限元法计算

介绍一种高温压力传感器冷却套的结构，并用有限元法计算冷却套的温度场分布，将轴对称的冷却套半边划分为许多三角形单元，将单元内的温度离散到单元三个节点上，应用传热学理论计算出三类边界条件的参数，应用有限元法计算出各节点的温度，经过计算机数据处理，得到冷却套温度场的分布，最后，对冷却套温度进行实测，测试结果与理论计算较为接近，表明冷却套结构设计是合理的，并且用有限元法计算冷却套温度场分布是行之有效的。     

叶片前缘有气膜孔的冲击冷却研究

为了确定涡轮叶片前缘阵列射流冲击到穿孔靶面的传热特性,本文采用六个放大比例的模型,进行了一系列的实验研究。在广泛的实际有兴趣的参数组合范围内,分别对各种模型,获得了压力损失和N_u数与射流雷诺数的关系式。这些组合参数包括:射流雷诺数,叶片前缘曲率半径与孔径的比,射孔间距与孔径的比以及射流冲击间隙与孔径的比。并利用实验数据,分析了各项几何参数的影响。     

加热圆管流动热阻力及熵产的数值分析

本文利用数值计算方法,对圆管加热流动的热阻力和熵产进行了综合分析研究。以空气加热圆管为例,通过联立求解流体力学基本方程和熵产方程,获得了热阻力、熵产及其随加热量、管长而变化的关系。数值分析结果表明,加热流动中的热阻力与熵产二者之间存在着对应相关的关系。     

转子系统模态理论的特点和应用

本文从无阻尼系统出发,理论上分析了转子系统振动方程的特征根,特征向量所具有的特点。除讨论正交性外,还进行了模态空间完备性的分析,推出转子系统强迫振动响应的解析表达式和传递函数的表达式,为参数辨识提供了理论依据。     

Mercury: can any ice exist at subpolar regions?

The heat transfer in a regolith subsurface layer of thickness 20 m has been theoretically simulated for the areas near Mercury's north pole aiming at the clarification of the possible existence of subsurface ice formations of different form. The paper considers different models of the icy regolith structure and composition: pure uniform amorphous ice; a porous dispersive system with ice-filled pores and voids; permafrost. For comparison the heat transfer in dry iceless regolith has been considered as well. It has been shown that the line of maximum distribution of subsurface icy formations depends on the icy regolith model, but for any one in the “hot” regions it does not go below 70°. For the “cool” regions this line has been shown to go from 5° to 10° southward than that for the “hot” ones. The possible thickness of icy regolith near the pole has been estimated for different models assuming an interior heat flow of 15 mW m⁻². It has been shown that the maximum thickness of this layer takes place at the pole and is equal to 10 km for any model.     

Structural dynamic responses of a stripped solar sail subjected to solar radiation pressure

The stripped solar sail whose membrane is divided into separate narrow membrane strips is believed to have the best structural efficiency. In this paper, the stripped solar sail structure is regarded as an assembly made by connecting a number of boom-strip components in sequence. Considering the coupling effects between booms and membrane strips, an exact and semi-analytical method to calculate structural dynamic responses of the stripped solar sail subjected to solar radiation pressure is established. The case study of a 100 m stripped solar sail shows that the stripped architecture helps to reduce the static deflections and amplitudes of the steady-state dynamic response. Larger prestress of the membrane strips will decrease stiffness of the sail and increase amplitudes of the steady-state dynamic response. Increasing thickness of the boom will benefit to stability of the sail and reduce the resonant amplitudes. This proposed semi-analytical method provides an efficient analysis tool for structure design and attitude control of the stripped solar sail.     

Design and analysis of a direct transfer trajectory from a near rectilinear halo orbit to a low lunar orbit

A near rectilinear halo orbit (NRHO) is regarded as a potential orbit for a future deep space station that can effectively support sustainable crewed lunar exploration missions. In this paper, the L₂ southern NRHOs are selected as the research object, and a direct transfer trajectory from an NRHO to a low lunar orbit (LLO) is designed and analyzed. First, based on the circular restricted three-body problem, the characteristics of NRHOs are discussed including geometric behaviour, stability and synodic resonance. Second, optimal direct transfer trajectories are obtained by combining a local gradient optimization with a numerical continuation strategy. A reachable domain calculation model is established. Finally, simulations are carried out to verify the feasibility of the trajectory design method. The relationship between the velocity change and the reachable domain is further analysed through simulation calculations.     

Initial accuracy and reliability of current BDS-3 precise positioning,velocity estimation,and time transfer (PVT)

The primary system of Chinese global BeiDou satellite system (BDS-3) was completed to provide global services on December 27, 2018; this was a key milestone in the development process for BDS in terms of its provision of global services. Therefore, this study analyzed the current performance of BDS-3, including its precise positioning, velocity estimation, and time transfer (PVT). The datasets were derived from international GNSS monitoring and assessment system (iGMAS) tracking networks and the two international time laboratories in collaboration with the International Bureau of Weights and Measures (BIPM). With respect to the positioning, the focus is on the real-time kinematic (RTK) positioning and precise point positioning (PPP) modes with static and kinematic scenarios. The results show that the mean available satellite number is 4.8 for current BDS-3 system at short baseline XIA1–XIA3. The RTK accuracy for three components is generally within cm level; the 3D mean accuracy is 8.9 mm for BDS-3 solutions. For the PPP scenarios, the convergence time is about 4 h for TP01 and BRCH stations in two scenarios. After the convergence, the horizontal positioning accuracy is better than cm level and the vertical accuracy nearly reaches the 1 dm level. With respect to kinematic scenarios, the accuracy stays at the cm level for horizontal components and dm level for the vertical component at two stations. In terms of velocity estimation, the horizontal accuracy stays at a sub-mm level, and the vertical accuracy is better than 2 mm/s in the BDS-3 scenario, even in the Arctic. In terms of time and frequency transfer, the noise level of BDS-3 time links can reach 0.096 ns for long-distances link NT01–TP02 and 0.016 ns for short-distance links TP01–TP02. Frequency stability reaches 5E–14 accuracy when the averaging time is within 10,000 s for NT01–TP02 and 1E–15 for TP01–TP02.     

MBD模式下生产准备探索与实践

生产准备是影响航空产品快速切换的主要环节.为实现航空产品在MBD模式下的快速切换,剖析了航空产品生产准备的主要内容,探讨了MBD模式下航空产品生产准备信息传递模式以及影响航空产品生产过程快速切换的关键因素.     

单面射流冲击淬火参数对7050铝合金厚板冷却的影响

研究了喷嘴直径(D)、相邻喷嘴距离(L)和喷射压力(P)对驻点区和紊流区换热的影响.结果表明:在高压(500kPa)下,紊流区心部换热效果比驻点区心部强;当喷嘴直径和喷射压力一定,相邻喷嘴距离对厚板冷却有影响,距离越小,相邻涡对互相干扰越大,紊流区冷却强度加大;当L/D=8～14时,从470℃冷至300℃的平均冷却速率...