地地导弹天文导航的一种建模方法

介绍了远程地地弹道式导弹采用惯性／天文组合制导方案的优点。提出了以惯性导航为主、天文导航为辅的一种导航方法，推导出该方法对应的导航基准参数计算模型、导航参数计算模型及天文导航系统的横向导引方程。最后通过仿真计算，给出了所提供的天文导航方法和计算模型对提高导弹命中精度的效能。     

直升机航姿信号仿真研究及其在电子特设系统综合模拟试验中的应用

本文介绍了某直升机电子特设系统综合模拟试验的直升机运动仿真模型,在此基础上着重对直升机航姿信号两种仿真方法进行了详细的阐述,并对两种方法的仿真试验结果进行了分析比较,指出了各自的优缺点。     

电大尺寸散射体的RCS计算方法研究

为了更加有效的求解电大目标散射计算问题,在避免谐振区效应情况下获得复杂目标的隐身雷达散射截面(RCS)特性,引用混合场积分方程(CFIE),在快速算法的求解迭代过程中采用共轭梯度算法(CG)的收敛技术,能够稳定的求解电大尺寸的RCS。计算和分析了金属球双站RCS和金属立方体双站RCS,并和精确计算、相关参考文献进行了比较,证明了方法的正确性,计算结果稳定,在工程实际上有较大的应用价值。     

复合材料动模量振动测定方法的研究

 本文采用Timoshenko梁理论,首次导出了悬臂梁和自由-自由梁自由端具有附加质量的特征方程,并进而讨论了多种因素对动模量计算值的影响。此外还提出了用弯曲振动确定剪切动模量G_(12)的一般方法。最后进行了实例分析和讨论。     

高速风洞支架干扰数值修正研究

提出了一种计算高速风洞支架系统对飞行器模型纵向气动力干扰量的数值计算方法 ,从跨声速全位势积分方程出发 ,编制了适用于飞行器全机模型及其带支架情况下的跨声速绕流计算程序。通过对双垂尾模型和GBM 0 3模型两个算例的计算 ,讨论了尾支撑位置及其几何外形参数对模型气动力的影响 ,并对GBM 0 3模型带短支杆情况下的纵向实验结果进行了修正。表明该方法对于分析研究风洞模型支架干扰问题并进行支架干扰修正是可行的、有效的 ,可以作为选择尾支撑位置及其几何外形参数和对跨声速风洞纵向实验结果进行支架干扰修正的工具。     

无任何附加假设的梁的自由振动

本文不采用平面假设来研究梁的弯曲自由振动，也不采用剪切型振动假设研究短粗梁的自由振动，而用弹性力学的位移法导出了梁的自由振动微分方程，并推导了简支梁的自振频率的统一公式，其特殊情况即为有附加假设的自振频率公式。     

舰载飞机自动着舰系统的研究

介绍了舰载飞机的自动着舰系统（包括了飞机的飞行控制系统，推力控制系统及航空母舰的导引系统），并指出只有精确地控制飞机的不滑轨迹，才能使飞机在航空母舰上安全降落，本文着得讨论俯仰指令型的纵向自动着舰系统的原理、结构及设计，并指出导引指令中对舰体运动的补偿。     

Hybrid integration method for highly maneuvering radar target detection based on a Markov motion model

To detect highly maneuvering radar targets in low signal-to-noise ratio conditions, a hybrid long-time integration method is proposed, which combines Radon-Fourier Transform (RFT), Dynamic Programming (DP), and Binary Integration (BI), named RFT-DP-BI. A Markov model with unified range-velocity quantification is formulated to describe the maneuvering target’s motion. Based on this model, long-time hybrid integration is performed. Firstly, the whole integration time is divided into multiple time segments and coherent integration is performed in each segment via RFT. Secondly, non-coherent integration is performed in all segments via DP. Thirdly, 2/4 binary integration is performed to further improve the detection performance. Finally, the detection results are exported together with target range and velocity trajectories. The proposed method can perform the long-time integration of highly maneuvering targets with arbitrary forms of motion. Additionally, it has a low computational cost that is linear to the integration time. Both simulated and real radar data demonstrate that it offers good detection and estimation performances.     

Effects of process parameters on mechanical properties of abrasive-assisted electroformed nickel

A cathode mandrel with translational and rotational motion, which was supposed to obtain uniform friction effect on surface, was employed in abrasive-assisted electroforming for revolving parts with complex profile. The effects of current density, translational speed and rotational speed on the deposit properties were studied by orthogonal test. The tensile strength, elongation and micro hardness value were measured to find out how the factors affected the properties. The optimized results show that changes of current density affect the tensile strength of nickel layer most, while translational speed has the most remarkable influences on both elonga-tion and micro hardness. The low rotational speed affects the properties least. In this experiment, a smooth nickel layer with tensile strength 581 MPa, elongation 17%and micro hardness 248HV is obtained by the orthogonal test.     

低速大转矩永磁游标电机在发酵罐中的应用

采用秸秆生产丁醇时,为了达到高效率发酵,需要使发酵液中菌体分布均匀,所加物料需要及时搅拌。工业化生产丁醇的发酵罐尺寸较大,搅拌过程对驱动电机的输出转矩要求较高,因此高效率、小体积、低速大转矩的秸秆发酵搅拌电机对工业化发酵生产丁醇意义重大。设计了一种定转子永磁游标电机用于发酵液搅拌,并对电机的槽极数、电磁性能进行了具体的研究。制造样机并采用滞环控制实现了对液态发酵对象的快速响应,且实现了低能耗、高效率的发酵过程。