多种失效模式相关的机构运动可靠度计算方法

机构运动中必然存在多种相关失效模式,多为影响机构运动的各类随机变量函数.为了在机构运动可靠性分析中有效考虑多种相关失效模式的影响,建立了考虑多种失效模式相关条件下的机构运动可靠度计算模型,并实现了对多种失效模式相关条件下的机构运动可靠度计算模型的求解,为考虑多种相关失效模式下的机构运动可靠性分析提供了一种有效途径.以6408滚动轴承为例,进行100 000抽样计算,考虑失效模式相关条件下运动可靠度为95.998 9%.该方法精度较高,具有一定的理论意义和应用价值.     

基于群论的空间可展开结构自由度分析

为了开发构型新颖、生命力强、便于运输和储藏的空间可展开结构,使其满足所处环境的时间、空间等苛刻条件,适应特殊任务的实际需求,亟需开展空间可展开结构的自由度及折展性能分析。由于现有可展结构多具有一定的对称性,基于群论方法,从对称学角度解析结构可动的本质,提出判别对称体系可动性的充分条件。根据几何约束性质,运用矩阵理论和变分原理,推导了可展结构中典型构成单元的位移协调矩阵。利用对称子空间,推导了机构位移模态、自应力模态的对称表示,并以闭合环形可展开结构为研究对象,开展了结构自由度分析。研究工作有助于新型空间可展开结构的研发与设计,为可展结构及其衍生结构的进一步研究与应用提供了理论基础。     

Nonlinear modal electromechanical coupling factor for piezoelectric structures containing nonlinearities

Within the linear framework, the Modal Electromechanical Coupling Factor (MEMCF) is an important indicator to quantify the dynamic conversion of mechanical energy and electrical energy of piezoelectric structures. It is also an important tool to guide the piezoelectric damping design of linear structures. Advanced aircraft often fly in maneuvers, and the variable working conditions induce drastic changes in the load level on structures. Geometric and contact nonlinearities of thin-walled structures and joint structures are often activated. To achieve a good vibration reduction effect covering all working conditions, one cannot directly use linear electromechanical coupling theory to instruct the piezoelectric damping design for nonlinear structures. Therefore, this paper defines the Nonlinear Modal Electromechanical Coupling Factor (NMEMCF) and proposes the corresponding numerical method for the first time to quantitatively evaluate the electromechanical coupling capability of nonlinear piezoelectric structures. Three candidate definitions of the NMEMCF are given, including two frequency definitions and one energy definition. The energy definition is the most promising one. It is not only applicable to both conservative and dissipative nonlinear structures but also compatible with the linear MEMCF. In addition, based on the energy formula, the NMEMCF can be obtained by only performing one nonlinear modal analysis in the open-circuit state. The analytical findings and the numerical tool are validated against two piezoelectric structures with different types of nonlinearities. A strong correlation among the NMEMCF, geometric parameters, and energy dissipation is observed. The results confirm that the proposed NMEMCF captures the physics of the electromechanical coupling phenomenon associated with nonlinear piezoelectric structures and can be used as an essential design indicator of piezoelectric damping, especially for variable working conditions.     

危害性分析中的模糊数学方法

利用模糊集合理论对影响故障模式危害性的各因素进行了模糊化处理，建立了故障模式危害性评定的模糊评判模型，并阐述了模糊评判方法的基本步骤。     

改进的风险优先数(RPN)分析方法

针对工艺故障模式影响分析(PFMEA,Process Failure Modes and Effects Analysis)中风险优先数(RPN,Risk Priority Number)分析方法存在的缺陷,在分析导致这些缺陷的原因的基础上,提出了一种基于费用及发生概率的定性与定量相结合的RPN分析方法.该方法中定性分析部分以传统RPN分析方法中的严酷度等级评价为基础,对工艺故障模式的严酷度等级进行评价;定量分析部分以故障模式发生后导致的费用损失的期望值作为RPN值.改进后的RPN分析方法中,定量化的数据使得风险排序更为客观、准确.最后,使用改进后的RPN分析方法对相控阵雷达中某组件的滤波器装配工艺进行了PFMEA分析,取得了良好的效果.      

Ballooning perturbations in the inner magnetosphere of the Earth: Spectrum,stability and eigenmode analysis

We investigate the generation of ballooning perturbations in the inner magnetosphere of the Earth in the dipole model of the geomagnetic field taking into account ionospheric boundary conditions. The ionosphere is considered as a thin layer with finite conductivity. The eigenmode spectrum is discrete and consists of Alfvén, slow magnetosonic, flute and incompressible modes. Their interaction depends on ionospheric conductivity. The decay rate is small in noon and night sectors and large in dawn and dusk sectors. The lowest stability threshold α/γ ≈ 4.25 is determined by flute modes.     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

复合材料单搭接胶接接头试验研究与数值模拟

针对不同搭接长度和不同被胶接件厚度的T300/QY8911层合板单搭接胶接接头进行了试验研究和数值模拟.建立了不同试验参数下的三维有限元模型,基于Hashin准则和连续介质损伤力学(CDM,Continuum Damage Mechanics)预测层合板面内损伤的起始和演化,应用黏聚区模型(CZM,Cohesive Zone Model)模拟层合板的分层损伤及胶层的失效.系统地研究了接头在不同参数下的失效模式、破坏形貌和极限载荷等的变化,模拟结果与试验吻合良好,验证了有限元分析模型的有效性.通过对接头的破坏形貌和应力分布进一步分析发现,胶接连接的失效模式和极限载荷均与胶接长度和被胶接件厚度有关;模拟接头胶接区在不同加载时刻的应力分布变化,反映了胶接连接在拉伸载荷下的破坏起始和演化过程.