载荷作用下5A06铝合金焊接试样的腐蚀敏感性

针对5A06铝合金焊接对腐蚀敏感性的影响,研究了载荷作用下的不同焊缝方向（垂直、穿越）的5A06铝合金试样在50℃的3.5% NaCl溶液中的腐蚀行为的影响和焊接接头的电化学腐蚀行为。结果表明,经过110 d的盐水溶液浸泡后,2种焊缝试样均是热影响区首先发生腐蚀,表面的腐蚀坑两侧由于材料组织的不同分别呈台阶式和韧窝状。穿越焊缝试样应力腐蚀敏感性较低,腐蚀坑顶端应力集中,有滑移台阶;垂直焊缝试样应力腐蚀敏感性较高,腐蚀坑沿焊缝贯穿试样表面,腐蚀坑两侧呈平行撕裂状态。电化学极化曲线表明,热影响区、母材区和焊缝区的自腐蚀电位分别为-1.369、-0.791和-0.740 V。      

腐蚀环境下铜薄膜传感器金属结构裂纹监测

铜薄膜传感器在飞机金属结构损伤监测过程中,将长期面临大气腐蚀环境的影响。针对此背景,研究了铜薄膜传感器在腐蚀环境下的耐蚀性能,及腐蚀后的疲劳裂纹监测性能。首先,采用脉冲偏压多弧离子镀技术在不同弧电流和基体负偏压水平下制备了一系列铜薄膜,对其耐蚀性能进行了对比研究。结果表明,在弧电流60 A和基体负偏压250 V时沉积的铜薄膜耐蚀性能最佳。然后,结合耐蚀性能最佳的沉积工艺参数,在2A12-T4铝合金中心孔板试件上制备了同心环状铜薄膜传感器阵列,并开展了盐雾腐蚀试验。最后,对腐蚀试验后的铜薄膜传感器进行了疲劳裂纹监测试验。结果表明:铜薄膜传感器在腐蚀环境下具有良好的耐蚀性能,耐蚀时间达1 000 h;腐蚀试验后的铜薄膜传感器对裂纹变化敏感,能实现对裂纹定量监测,监测精度为1 mm,监测结果具有良好的可重复性。     

00Cr17Ni14Mo2不锈钢的性能研究

本文研究了00C r17N i14Mo2不锈钢材料的的性能,证明其具有很好的机械性能、焊接性能和耐腐蚀性能,从用户和研究开发的角度探讨了其在压力容器、化工装置等领域的应用。     

Understanding stress corrosion cracking behavior of 7085-T7651 aluminum alloy in polluted atmosphere

The electrochemical and Stress Corrosion Cracking (SCC) behaviors of 7085-T7651 aluminum alloy in different environments are studied by electrochemical and mechanical testing. The research shows that the type, concentration of the corrosive medium and electrolyte state affect the electrochemical and SCC controlling processes of aluminum alloys. The Thin Electrolyte Layer (TEL) state and the addition of HSO₃^– increase the corrosion rate and SCC susceptibility. The presence of HSO₃^– in a corrosive environment can significantly accelerate the corrosion rate and mechanical property degradation, and this effect increases with the increase of HSO₃^– concentration. Compared with the solution environment, the TEL environment will further aggravate corrosion and mechanical property degradation. With the increase of HSO₃^– concentration, the pH of the corrosive environment exhibits little change, while the SCC degradation is significantly promoted. This is attributed to the HSO₃^– induced buffer effect and film-assisted stress effect, yielding the overshadowing effect against solution pH.     

Stress corrosion behavior of 2195-T8 Al-Li alloy with an artificial pit exposed to a 30vol% HNO3 solution

This paper experimentally studied the stress corrosion behavior of 2195-T8 Al-Li alloys with prefabricated pits in 30vol% HNO₃. The microstructure was observed and determined by the scanning electron microscopy and the transmission electron microscopy. The typical corrosion features, i.e., regular or irregular corrosion pits and sub/intergranular corrosion, were investigated, and the role of stress were analyzed. The statistical results of the number and area of corrosion pits in various sizes were studied using an improved image processing method. Experimental results demonstrate that stress affects the intergranular corrosion or sub-intergranular corrosion of the alloy most, and promotes them to evolve into cracks under stress corrosion. Stress also plays a role in accelerating corrosion severity of certain corrosion feature. The number of corrosion pits with an area of 0–50 μm² can be seen as an index to reflect the degree of corrosion. Besides, a corrosion phenomenon, i.e., the pit bottom in the site with the maximum stress locally suffering from no severe corrosion, was observed and discussed.