利用航天器分舱段振动试验数据获取整器响应的方法

未来大型组合体航天器振动试验可能难以在现有设备上进行,需要进行分舱考核。文章针对此问题开展了利用分舱段振动试验获取整器响应的方法研究。提出的方法为:根据不同界面下模态的映射关系,利用单舱段的振动试验数据辨识出舱段的两端固支模态;采用模态综合技术计算出整器组合体模态参数,拟合出结构的加速度响应传递函数;结合整器的加速度试验条件可以给出整器的试验响应曲线。仿真验证结果表明该方法合理可行,具有工程应用价值。     

Mining Spatial Associations with Limited Sensory Information

Abstract

Human navigation in an unknown environment requires an understanding of the spatial relationships of the terrain. For example, a soldier who is on a reconnaissance mission in a new city needs to “know” the spatial layout of the surroundings with high confidence. Oftentimes, this understanding must be acquired within a very short amount of time and with limited sensory inputs. The soldier would benefit from a digital avatar that draws inferences about the spatial layout of the city based on an initial set of observations and guides the soldier either in further exploring the environment or in making decisions based on these inferences. In this paper, we present and evaluate an inductive approach to learning spatial associations using sensory data that is available from the simulation environment of a computer game, Unreal Tournament. We study two kinds of spatial relationships between nodes on a level of a game map: nodes that are placed near each other to satisfy some spatial requirement and nodes that are placed near each other to satisfy the design preferences of a level architect. We show that we can infer both kinds of relationships using an association rule mining algorithm. Furthermore, we show how to use an ontology to distinguish between these relationships in order to discover different types of spatial arrangements on a specific map. We discuss how the inferred associations can be used to control an avatar that makes recommendations for navigating unexplored areas on a map. We conclude with some thoughts on the applicability of our methods to scenarios in the real world, beyond the simulation environment of a game, and on how the learned associations can be represented and queried by a simple question-answer type system.     

基于某型发动机发展 STOVL 动力性能方案研究

短距起飞/垂直降落（STOVL）飞机由于其优越的作战性能,受到了世界航空大国的高度重视。通过借鉴目前最先进的 STOVL 动力 F135- PW -600发动机技术发展思路,研究了基于国内某型发动机改 STOVL 动力方案时,主发动机与升力风扇之间的匹配和约束关系。研究结果表明：随着升力风扇压比和流量的增加,主发动机升力减小,升力风扇升力增加;同一主发动机状态下,升力风扇流量越大,发动机前后升力平衡的升力风扇压比越小,总升力越大;主发动机性能越高,发动机前后升力平衡的升力风扇压比和流量越大,发动机总升力也越大。     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

关于非扩张映像和非扩张半群的单调混杂算法

在Hilbert空间中，使用单调混杂算法，修正了由Zhao等引进的隐迭代格式，分别对一族有限个非扩张映像和非扩张半群证明了强收敛定理。同时，也使用这种算法来逼近单调算子的零点，并得到强收敛定理。     

论股份合作制企业的劳动法律关系

本文结合股份合作制企业的特点，系统的分析了股份合作制企业的劳动法律关系的特殊性和这些特殊性产生的根源。文章对实践中股份合作制企业在处理劳动关系的过程中经常出现的问题进行了分析，并且提出了解决问题的建议和思考。     

基于特征映射的涡轮导向叶片精铸模型自动转换研究

通过对涡轮导向叶片及其精铸模型结构特点的分析,以特征映射理论为依据,提取其结构特征、特征内部的约束关系和构成特征的几何元素,将叶片的内外零件模型添加加工余量、工艺附件、收缩率后得到精铸模具设计和制造所需要的模具型腔体模型,从而完成了精铸模具设计各模型间的自动转换,大大缩短了精铸模具的设计周期,具有重要的理论和实践应用价值.     

论航空公司客户关系管理的发展方向

介绍了客户关系管理（cRM）理论，研究了国内外航空公司发展CRM的历史，并重点分析了国内航空公司在客户关系管理上存在的主要问题和解决方案，最后根据CRM理论阐述了航空公司客户关系管理的发展方向。     

Radar Imaging of Mercury

Earth-based radar has been one of the few, and one of the most important, sources of new information about Mercury during the three decades since the Mariner 10 encounters. The emphasis during the past 15 years has been on full-disk, dual-polarization imaging of the planet, an effort that has been facilitated by the development of novel radar techniques and by improvements in radar systems. Probably the most important result of the imaging work has been the discovery and mapping of radar-bright features at the poles. The radar scattering properties of these features, and their confinement to permanently shaded crater floors, is consistent with volume backscatter from a low-loss volatile such as clean water ice. Questions remain, however, regarding the source and long-term stability of the putative ice, which underscores the need for independent confirmation by other observational methods. Radar images of the non-polar regions have also revealed a plethora of bright features, most of which are associated with fresh craters and their ejecta. Several very large impact features, with rays and other bright ejecta spreading over distances of 1,000 km or more, have been traced to source craters with diameters of 80–125 km. Among these large rayed features are some whose relative faintness suggests that they are being observed in an intermediate stage of degradation. Less extended ray/ejecta features have been found for some of the freshest medium-size craters such as Kuiper and Degas. Much more common are smaller (<40 km diameter) fresh craters showing bright rim-rings but little or no ray structure. These smaller radar-bright craters are particularly common over the H-7 quadrangle. Diffuse areas of enhanced depolarized brightness have been found in the smooth plains, including the circum-Caloris planitiae and Tolstoj Basin. This is an interesting finding, as it is the reverse of the albedo contrast seen between the radar-dark maria and the radar-bright cratered highlands on the Moon.     

Analysis of the data processing strategies of spherical harmonic expansion model on global ionosphere mapping for moderate solar activity

Spherical harmonic (SH) expansion is widely used to model the global ionosphere map (GIM) of vertical total electron content (VTEC). According to the impact of different data processing methods of the SH expansion model on the VTEC maps, we specifically performed comprehensive analysis in terms of the data sampling rate, the time resolution, the spherical harmonic degree, and the relative constraint. One month of GPS data (January in 2016) from the International GNSS (Global Navigation Satellite System) Service (IGS) network in a moderate ionospheric activity period at the descending phase of Solar Cycle 24 was processed. To improve the computational efficiency of the daily GIM generation, the data sampling rate of 5?min was recommended allowing the GIM precision loss within 0.10 TECU (total electron content unit). The global VTEC map could be better represented in temporal and spatial domains with higher time resolution and higher spherical harmonic degree, especially at low latitude bands and in the southern hemisphere. The GIM precision improvement was about 10.91% for 1-h and about 15.15% for 0.5-h compared with the commonly used 2-h time resolution. The use of spherical harmonic degree 17 or 20 instead of 15 could improve the precision by 3.19% or 6.06%. We also found that an optimal relative constraint had to be found experimentally considering both the GIM precision and the GIM root mean square (RMS) map.