基于SMDO的滑模控制器设计及其在导弹上的应用

提出了一种基于滑模干扰观测器(SMDO)的滑模控制器(SMC)设计方法.针对一类级联多输入多输出(MI-MO)非线性系统,根据奇异摄动原理将其分为内、外回路分别进行控制器设计.以外回路为例,分析了传统基于饱和函数的滑模控制的鲁棒性,针对其在面I临干扰时鲁棒性较差的问题,在名义滑模控制律的基础上设计了基于超扭曲算法的SM...     

基于H∞最优化与层次结构动态逆的非线性飞行控制器设计

针对扰动环境下的导弹飞行控制问题提出一种基于H∞最优化与层次结构动态逆(HSDI)的鲁棒非线性控制方法.设计层次结构动态逆控制器时将层次结构优化为3层,并按照时标分离的思想调整了各层次的状态变量,使得控制器更为简洁.在此基础上,将层次结构动态逆控制器与导弹6自由度(DOF)非线性模型联合作为H..控制的广义被控对象,通...     

Robust Hybrid Control for Ballistic Missile Longitudinal Autopilot

This paper investigates the boost phase’s longitudinal autopilot of a ballistic missile equipped with thrust vector control. The existing longitudinal autopilot employs time-invariant passive resistor-inductor-capacitor (RLC) network compensator as a control strategy, which does not take into account the time-varying missile dynamics. This may cause the closed-loop system instability in the presence of large disturbance and dynamics uncertainty. Therefore, the existing controller should be redesigned to achieve more stable vehicle response. In this paper, based on gain-scheduling adaptive control strategy, two different types of optimal controllers are proposed. The first controller is gain-scheduled optimal tuning-proportional-integral-derivative (PID) with actuator constraints, which supplies better response but requires a priori knowledge of the system dynamics. Moreover, the controller has oscillatory response in the presence of dynamic uncertainty. Taking this into account, gain-scheduled optimal linear quadratic (LQ) in conjunction with optimal tuning-compensator offers the greatest scope for controller improvement in the presence of dynamic uncertainty and large disturbance. The latter controller is tested through various scenarios for the validated nonlinear dynamic flight model of the real ballistic missile system with autopilot exposed to external disturbances.     

北斗／罗兰-C组合定位技术

“北斗一号”是我国的卫星导航系统,其有源定位模式使其很难得到广泛应用。为此,提出了一种北斗／罗兰-C组合定位方案以实现无源定位。该方案利用“北斗一号”两颗卫星和地面罗兰-C台站获得的距离差信息实现双曲线相交定位。仿真结果表明,该方案的精度可以满足一般定位要求,具有较强的实用性。     

用于压力传感器校准的高低温试验箱设计

基于压力传感器在高低温环境下的校准需求,设计了一种专用高低温试验箱。其控制温度范围可达到-120℃[KG-*4]~[KG-*7]500℃。提出了高低温试验箱的总体方案,介绍了宽温区温度的实现方法以及高温和低温系统不兼容的解决方法和控制流程。试验验证结果显示,高低温试验箱达到了实现宽温区温度的目的,满足设计指标要求。     

多导弹齐射攻击协同制导(英文)

Cooperative guidance problems of multiple missiles are considered in this article. A cooperative guidance scheme, where coordination algorithms and local guidance laws are combined together, is proposed. This scheme actually builds up a hierarchical cooperative guidance architecture, which may provide a general solution to the multimissile cooperative guidance problems. In the case of salvo attacks which require missiles to hit the target simultaneously, both centralized and distributed coordination algorithms are derived based on the impact-time-control guidance （ITCG） law. Numerical simulations are performed to demonstrate the effectiveness of the proposed approaches.     

火箭弹垂直发射动力学建模与仿真

首先建立了火箭弹垂直发射的弹道模型,然后研究了升阻比、弹道倾角等参数的变化对火箭弹射程的影响,并分别对这两种情况进行了仿真。仿真结果表明,滑翔飞行时,在一定程度上增大了升阻比,有助于增大火箭弹的射程;另外在转弯结束时,弹道倾角的变化对火箭弹射程也有一定影响。     

Accurate 3D Target Positioning in Close Range Photogrammetry with Implicit Image Correction

Accurate three-dimensional (3D) target positioning is of great importance in many industrial applications. Although various methods for reconstructing 3D information from a set of images have been available in the literature, few of them pay enough attention to the indispensable procedures, such as target extraction from images and image correction having strong influences upon the 3D positioning accuracy. This article puts forward a high-precision ellipse center (target point) extraction method and a new image correction approach which has been integrated into the 3D reconstruction pipeline with a concise implicit model to accurately compensates for the image distortion. The methods are applied to a copyright-reserved close range photogrammetric system. Real measuring experiments and industrial applications have evidenced the proposed methods, which can significantly improve the 3D positioning accuracy.     

基于神经网络的飞行器总体优化设计

针对经验公式存在的精度低、适用范围受限的缺点,采用广义回归网络代替经验公式计算气动特性,并将其嵌入到优化设计流程之中,提出了一种基于神经网络的飞行器总体优化设计方法。神经网络的训练样本输入、输出数据通过试验设计和涡格法计算得到。以高空长航时无人机为例,选取航时与机翼结构重量系数作为目标函数,应用所提出的方法进行总体优化设计。计算结果表明,提出的方法是可行的,能够满足设计要求,同时降低优化过程的复杂程度,减少迭代次数。     

大跨悬挑屋盖风压分布风洞试验分析

通过大跨悬挑曲面屋盖刚性模型风洞试验,分析各风向角风压系数均值等值线图及跨中区域时体型系数以确定最不利风向角,研究跨中迎风边缘及顺风测点功率谱及相干特性,最后针对跨中不同位置测点风压概率分布密度特性探讨峰值因子合理取值。