大航向角误差情况下飞行中对准研究

为了解决飞行器在大航向角误差的情况下进行飞行中对准的难题,将一种线性大航向角误差模型应用于飞行器飞行中对准的过程.详细推导了线性大航向角误差模型,设计了飞行器在大航向角误差情况下进行飞行中对准的卡尔曼滤波模型,并进行了数字仿真.仿真结果表明,线性大航向角误差模型应用于飞行器飞行中对准,能够很好地解决飞行器在大航向角误差情况下进行对准的难点,并给出了适合于大航向角误差模型的机动方式.最后,提出了线性大航向角误差模型在工程应用中的几点建议     

运动基航天飞行模拟器信号缩比策略

对于大幅值的输入信号,三阶多项式缩比法易产生信号畸变且参数配置复杂;而Hermite缩比函数法的触发速度较慢.提出两种改进的缩比方法:基于三阶多项式缩比法的最优参数配置法和加入线性缩比的非线性缩比法.前一种方法通过参数的优化配置最大化稳定区,以防止信号的畸变;后一种方法则利用线性缩比的特性将缩比度限制在稳定区内.仿真结果表明:线性缩比的加入可以防止三阶多项式缩比法信号的畸变;最优配置参数法应用方便且整体效果较好.为航天飞行模拟提供了更有效的缩比策略.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

环型与线型聚能装药射流成型机理对比

环型聚能装药药型罩2侧在挤压汇聚形成射流过程中存在不对称性,不能完全套用线型聚能装药射流成型的现有理论。利用DYNA3D软件对相同剖面结构的环型、线型聚能装药射流成型过程进行数值模拟,通过比较分析得出了环型聚能装药形成杵体及射流参数的分布特性,为进一步理论研究及工程应用提供参考。     

基于A320飞机横航向控制律架构的LQ设计

空客A320飞机横航向控制律采用特征结构配置方法计算闭环增益,实现了期望特征值的配置及横航向关键参数之间的解耦。基于A320横航向控制律架构,提出使用线性二次型(Linear Quadratic,简称LQ)方法,对闭环增益进行重新设计。首先根据期望的特征值引入关键参数的频域整形环节,而后通过调整二次型性能指标加权矩阵实现期望特征值的逼近及关键参数之间的解耦,并求得闭环反馈增益,最后在特征结构、稳定裕度和横航向解耦效果方面与空客设计结果作了对比分析。仿真结果表明,LQ设计可获得与特征结构配置设计相近的结果,即得到接近期望值的特征值,并实现关键变量的解耦,同时保证了闭环稳定裕度。     

关于多项式系数二阶线性微分方程的可积性问题

主要探讨了实域上当ｇ（ｘ），ｈ（ｘ）是多基式，二阶变系数线性微分方程ｙ″＋ｇ（ｘ）ｙ‘＋ｈ（ｘ）ｙ＝０的可积性问题，沿袭了文」１「中算子矩阵理论的思想，得到了该方程要积的充分必要条件，且给出可积时的通解公式，并举例指出了文中「５，６」中收集的许多可积的二阶线性微分方程，其中相应的多项式系数的部分均是本文的特例。     

中小型企业建立生产计划优化线性规划模型的通用模式

本文提出了建立企业生产计划优化线性规划模型中约束方程的通用方法。简化了建模过程。并经多个企业的实际应用证明了其普遍适用性。为中小型企业建立生产计划优化线性规划模型提供了一个通用模式。     

基于STFRFT的LFM引信抗欺骗干扰方法

针对线性调频脉冲压缩引信易受转发式假目标欺骗干扰问题,提出了基于短时分数阶傅立叶变换(STFRFT)的抗欺骗干扰方法。首先,通过分数阶傅立叶变换将回波信号与欺骗干扰各分量信号进行分离;再利用相同调频率的LFM信号经短时分数阶傅立叶变换后最大幅值与窗函数宽度成线性关系,而不同调频率的最大幅值不随窗函数宽度变化的特点,有效分辨假目标欺骗干扰,正确检测目标回波信号;最后,通过仿真证明了方法的正确性,并验证所提方法具有良好的抗欺骗干扰效果。     

一类回归分析预测模型及其应用

提出了一类回归分析预测模型，这类模型将多项式和一些简单的数学函数相乘．得出分两步求解模型中待定参数的近似方法，简化了待定参数的求解过程。给出了这类模型的应用实例，结果表明：同一些简单函数构成的模型相比，这类模型具有较好的预测能力。     

Modeling and analysis of mover gaps in tubular moving-magnet linear oscillating motors

A tubular moving-magnet linear oscillating motor (TMMLOM) has merits of high efficiency and excellent dynamic capability. To enhance the thrust performance, quasi-Halbach permanent magnet (PM) arrays are arranged on its mover in the application of a linear electro-hydrostatic actuator in more electric aircraft. The arrays are assembled by several individual segments, which lead to gaps between them inevitably. To investigate the effects of the gaps on the radial magnetic flux density and the machine thrust in this paper, an analytical model is built considering both axial and radial gaps. The model is validated by finite element simulations and experimental results. Distributions of the magnetic flux are described in condition of different sizes of radial and axial gaps. Besides, the output force is also discussed in normal and end windings. Finally, the model has demonstrated that both kinds of gaps have a negative effect on the thrust, and the linear motor is more sensitive to radial ones.