激光等离子体对靶冲量传递的实验研究

针对激光对靶冲量传递问题,提出了悬摆法和光电测速法相结合的测量方法,并应用该技术测量了不同激光功率密度下的激光支持爆轰波对靶产生的冲量,得到了聚焦透镜焦点附近的靶获得的冲量、冲量耦合系数和作用激光功率密度呈非线性关系,且随着作用激光功率密度的增加冲量耦合系数呈饱和趋势,最后根据有关理论对实验测试结果进行了解释。     

‘Size effect’ related bending formability of thin-walled aluminum alloy tube

Aluminum alloy (Al-alloy) thin-walled (D/t > 20, diameter D, wall thickness t) bent tubes have attracted increasing applications in many industries with mass quantities and diverse specifications due to satisfying high strength to weigh ratio requirements of product manufacturing. However, due to nonlinear nature of bending with coupling effects of multiple factors, the similarity theory seems not applicable and there occurs a challenge for efficient and reliable evaluation of the bending formability of thin-walled tube with various bending specifications. Considering the unequal deformation and three major instabilities, the bending formability of thin-walled Al-alloy tube in changing tube sizes such as D and t are clarified via both the analytical and FE modeling/ simulations. The experiments of rotary draw bending are conducted to validate the theoretical models and further confirm ’size effect’ related bending formability. The major results show that (1) The anti-wrinkling capability of tube decreases with the larger D and smaller t, and the effect significance of t is larger than that of D even under rigid supports; (2) The wall thinning increases with the larger D and smaller t, and this tendency becomes much more obvious under rigid supports; (3) The cross-section deformation increases with the larger D and smaller t according to the analytical model obtained intrinsic relationship, while this tendency becomes opposite due to the nonlinear role of mandrel die; (4) The size factor D/t can be used as a nondimensional index to evaluate both the bending formability regarding the wall thinning and cross-section deformation.     

Effects of geometrical parameters on wrinkling of thin-walled rectangular aluminum alloy wave-guide tubes in rotary-draw bending

Inner flange and side wrinkling often occur in rotary-draw bending process of rectangular aluminum alloy wave-guide tubes, and the distribution and magnitude of wrinkling is related to geometrical parameters of the tubes. In order to study the effects of geometrical parameters on wrinkling of rectangular wave-guide tubes, a 3D-FE model for rotary-draw bending processes of thin-walled rectangular aluminum alloy wave-guide tubes was built based on the platform of ABA-QUS/Explicit, and its reliability was validated by experiments. Simulation and analysis of the influence laws of geometrical parameters on the wave heights of inner flange and side wrinkling were then carried out. The results show that inner flange wrinkling is the main wrinkling way to rectan- gular wave-guide tubes in rotary-draw bending processes, but side wrinkling cannot be neglected because side wrinkling is 2/3 of inner flange wrinkling when b and h are smaller. Inner flange and side wrinkling increase with increasing b and h; the influence of b on side wrinkling is larger than that of h, while both b and h affect inner flange wrinkling greatly. Inner flange and side wrinkling decrease with increasing R/h; the influence of h on inner flange and side wrinkling is larger than that of R.     

应用激光相位-多普勒系统测量雾化液滴颗粒和流动特性

在几何光学近似理论的基础上分析了相位多普勒方法的理论模型和相位 粒径特性关系 ,分析了实验应用的光纤型激光相位多普勒系统的原理和组成 ,并应用此系统对雾化喷嘴的流动和颗粒特性进行了测量 ,得到了液滴的二维速度与粒径的相关和统计特性。     

大功率激光能量传输多光束协同捕获瞄准与跟踪技术研究

以用于空间太阳能电站的远距离、大功率激光无线能量传输为研究背景,以提高系统能量传输效率为宗旨,针对多光束传输的激光无线能量传输系统协同捕获、瞄准与跟踪(APT)方法进行研究。首先通过对大功率激光无线能量传输系统的分析,获知了单光束激光无线能量传输系统的局限性,然后针对大功率、多光束激光无线能量传输系统的协同APT系统组成,分析了单终端多光束系统和多终端多光束系统的实现方法及构成,最后针对单光束、7光束和9光束发射系统的目标重构光斑进行仿真,仿真结果表明,通过精确的多光束协同APT系统可以实现光束重构,重构后的能量光斑能量密度和分布都能得到改善。文章的研究成果将为建造用于空间太阳能电站的大功率、远距离激光能量传输系统提供技术储备和理论依据。     

满足一等量块检定要求的接触式激光量块干涉仪

最新研制的接触式激光量块干涉仪主要用于测量一、二等量块的中心长度，其长度测量不确定度达到（0.02 0.2L)μm。文中介绍了其工作原理、测量不确定度分析，给出了量块测量的验证数据。     

激光测振技术的最新进展

激光测振技术在近20年取得了巨大进展。本文以2004年6月在意大利召开的第六届激光测振国际会议的技术内容为基础，重点介绍激光测振技术在计量学方面的进展和在其他领域的应用。     

电弧加热射流O2激光诱导荧光技术温度测量

采用ArF准分子激光器作为激发光源来激励O2-Schumann-Runge带系(B3Σ-u←X3Σ-g)193.3nm附近的转动吸收谱线,用紫外光电倍增管探测该带系256nm附近的荧光信号,建立了ArF准分子激光器O2激光诱导荧光流场测试系统.在建立O2单带测温模型和软件的基础上,利用Schumann-Runge带系(10,2)带的荧光信号、测量了氧氩混合电弧加热射流的径向温度分布.结果表明我们建立的ArF准分子激光器O2-LIF测试系统是成功的.     

下一代数据中继卫星系统发展思考

通过系统阐述中继卫星系统的发展过程,给出了主要国家和组织的中继卫星系统技术体制和现状.再结合卫星、载人航天器和深空探索的未来发展趋势,分析了下一代中继卫星系统的发展需求.在此基础上,从体系结构、卫星平台、链路调制体制、网络协议等方面,探讨并给出了下一代中继卫星系统的发展趋势和技术途径.为满足未来近地、深空航天任务,以及临近、低空快速移动用户的不同要求,节约系统成本,下一代中继卫星系统将向专业化和与其他系统融合的方向发展:星间链路将增加激光链路,数据速率可达到10 Gbit/s以上;多址业务成为主用,同时支持用户数能力将极大提高;对于链路调制体制,在采用CR(Cognitive Radio,认知无线电)和SDR(Software Defined Radio,软件定义无线电)技术的基础上,可实现实时自适应调整和根据需求加载配置;数据传输将采用网络化方式,天地间构成一体化DTN(Delay Tolerant Network,容延迟网络).     

基于贝叶斯理论的激光陀螺可靠性评估

激光陀螺是一种由多种元器件组成的高可靠性、长寿命的光电器件,在可靠性评估中,可以依据最小薄弱环节定理,基于传统寿命试验,建立激光威布尔分布可靠性模型;但是由于其高可靠性的特点,在可靠性寿命试验中常常得不到失效数据,应用传统的参数评估方法不能对威布尔分布中的未知参数进行估计.贝叶斯原理得到各个时刻的失效概率,进而建立参数的线性回归模型对威布尔模型中的未知参数进行估计,从而得出激光陀螺的可靠性指标,最后对此种方法进行了验证.该方法中贝叶斯估计结合经验信息大大减小了试验样本数,且克服了传统可靠性评估方法依赖失效数据的缺点,在工程应用上具有很高的价值,结果表明了该方法的有效性.