Design of tracking mount and controller for mobile satellite laser ranging system

In this study, we have proposed and implemented a design for the tracking mount and controller of the ARGO-M (Accurate Ranging system for Geodetic Observation - Mobile) which is a mobile satellite laser ranging (SLR) system developed by the Korea Astronomy and Space Science Institute (KASI) and Korea Institute of Machinery and Materials (KIMM). The tracking mount comprises a few core components such as bearings, driving motors and encoders. These components were selected as per the technical specifications for the tracking mount of the ARGO-M. A three-dimensional model of the tracking mount was designed. The frequency analysis of the model predicted that the first natural frequency of the designed tracking mount was high enough. The tracking controller is simulated using MATLAB/xPC Target to achieve the required pointing and tracking accuracy. In order to evaluate the system repeatability and tracking accuracy of the tracking mount, a prototype of the ARGO-M was fabricated, and repeatability tests were carried out using a laser interferometer. Tracking tests were conducted using the trajectories of low earth orbit (LEO) and high earth orbit (HEO) satellites. Based on the test results, it was confirmed that the prototype of the tracking mount and controller of the ARGO-M could achieve the required repeatability along with a tracking accuracy of less than 1 arcsec.     

基于加权最小二乘法的大部件对接位姿评估算法研究

本文以定位器支撑的大部件调姿系统为研究对象,通过激光跟踪仪测得大部件上多个测点坐标数据.针对各点在不同坐标系下测量点值不匹配且各点精度要求有差异的问题,提出了最小二乘法评估大部件位姿的模型,并利用权值实现对多个测点数据进行误差分配优化,为大型部件的位置姿态评估计算提供一套有效的解决方案.     

高性能大型金属构件激光增材制造:若干材料基础问题

简要介绍了高性能大型金属构件激光增材制造的技术特点、国内外研究进展及技术发展面临的挑战,分析了大型金属构件激光增材制造的"高性能材料制备"与"复杂结构直接制造"有机融合、"控形/控性"一体化的独特特征。指出高性能大型关键金属构件激光增材制造技术的发展和工程应用,将在很大程度上取决于人们对激光增材制造过程中对激光/金属交互作用行为及能量吸收利用机制、内部冶金缺陷形成机制及力学行为、移动熔池约束快速凝固行为及构件晶粒形态演化规律、非稳态循环固态相变行为及显微组织形成规律、内应力演化规律及构件变形开裂预防方法等材料基础问题的深入研究。     

谈扫模方法对提高激光陀螺性能的重要性

本文分析了激光陀螺的扫模原理,并推算了扫模峰值光强包络与陀螺最关键参数损耗的关系,分析结果对陀螺改进设计和提高陀螺性能具有重要意义。     

合成气扩散燃烧的OH-PLIF测量

为了解中低热值合成气在燃气轮机燃烧室中的燃烧特性,利用平面激光诱导荧光(PLIF)法,对模型燃烧室内CH4和具有不同C-H比的合成气旋流扩散火焰开展实验研究.实验结果表明,CH4与合成气火焰呈现出截然不同的火焰形状,瞬态OH-PLIF图像揭示了它们具有湍流火焰的共同特征,且火焰都稳定在喷嘴出口位置.相比之下,CH4燃烧...     

Static Analysis of Functionally Graded Sandwich Plates Using an Efficient and Simple Refined Theory

In this paper, a new displacement based high-order shear deformation theory is introduced for the static response of function-ally graded sandwich plate. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. Two common types of functionally graded sandwich plates, namely, the sandwich with functionally graded facesheet and homogeneous core and the sandwich with homogeneous facesheet and functionally graded core, are considered. Governing equations are derived from the principle of virtual displacements. The closed-form solution of a simply supported rectangular plate subjected to sinu-soidal loading has been obtained by using the Navier method. The validity of the present theory is investigated by comparing some of the present results with those of the classical, the first-order and the other higher-order theories. It can be concluded that the proposed theory is accurate and simple in solving the static bending behavior of functionally graded sandwich plates.     

激光捷联惯导系统温度误差补偿研究

针对激光陀螺惯性导航系统中惯性器件零偏随温度变化的情况,在-30℃～+50℃温度范围内,通过大量的温度实验,建立了零偏与温度变化的多项式模型,并用该模型对实验数据进行了补偿,扣除地速和重力加速度的分量,惯性器件输出几乎为零。最后在不同温度下进行了初始对准实验,实验结果表明：经过温度补偿后,在-30℃～+50℃ 温度内,俯仰角误差平均在0.0019° 以内,横滚角误差平均在0.0038°以内,航向角误差平均在0.014° 以内,接近了常温下的初始对准精度,满足了系统的指标要求。     

富燃料推进剂燃烧产物粒度参数的激光衰减法测量

介绍了激光衰减法测量粒子参数的基本原理.搭建了激光衰减法测量高铝含量富燃料推进剂实验系统,解决了燃烧环境下粒度测试的光学介入问题,对高铝含量富燃料推进剂中粒子参数进行测量,对所得的凝相燃烧产物进行电镜分析,并对电镜照片进行分析处理,计算出燃烧后凝相产物平均粒径,验证了激光衰减法测量粒子参数的可行性和合理性.     

激光跟踪仪现场测量不确定度检测

为了满足现场测量的要求,掌握AT901-B激光跟踪仪的测量精度随测量环境改变而变化的规律,通过试验,对激光跟踪仪测量精度随时间变化、测量距离变化和测量角度变化的规律进行了研究,得到测量不确定度的变化规律,为不同测量环境下的现场测量提供了测量精度评价参考。     

激光跟踪仪在全机水平测量的应用

简要介绍了传统飞机全机水平测量方法的优缺点,以及激光跟踪仪系统(Laser Tracker System)测量的基本原理,并对水平测量的可行性进行了讨论。