A novel temperature-compensation method based on correlation analysis for multi-FOG INS

Aimed at improving the bias stability of Fiber-Optic Gyroscope (FOG)-based inertial navigation systems in environments of various ambient temperatures, a novel temperature-compensation method based on a correlation analysis of the same batch of FOGs is proposed. The empirical mode decomposition method was employed to filter the high-frequency noises of the FOGs. Then, the correlation information of the multiple FOGs was used to analyze the feasibility of the method. Eventually, the same residual error of the FOGs was compensated via the simple piecewise linear models. The experimental results indicate that excellent compensation effects for both high- and low-accuracy FOGs are achieved using the proposed method. Specifically, the accuracies of high-accuracy FOGs are improved by approximately 33.9%, 20%, and 31.2%, while those of low-accuracy FOGs are improved by approximately 39.1%, 20.8%, and 26.1%. The method exhibits the merits of simplicity, validity, and stability, and thus is expected to be widely used in engineering applications.     

迭代学习方法在PID控制器参数自动调节中的应用及收敛性分析

针对PID控制器参数在具有不确定项或输出干扰项的非线性时变系统中的调节困难,提出了应用迭代学习方法整定PID控制器参数的方法,利用系统的跟踪误差信息自动整定控制器参数,通过理论分析得到此设计方法收敛的充分条件。此方法设计简单且具有普遍性,仿真结果验证了此设计方法的有效性。     

Boundary of nighttime ozone chemical equilibrium in the mesopause region: Improved criterion of determining the boundary from satellite data

A modified derivation of the criterion of nighttime ozone chemical equilibrium (NOCE) in the mesopause region is presented. According to 3D model calculations, the improved criterion reproduces the lower boundary of the equilibrium much better than its earlier version. Processing of the SABER/TIMED data of 2021 has shown that the modified criterion elevates the NOCE boundary by ～ 0.1–1.7 km, depending on latitude and season. The proposed method of determining the condition of chemical equilibrium can be used to analyse the equilibrium of many trace gases in the stratosphere and troposphere important for different practical applications.     

某大型飞机后缘襟翼气动/机构综合优化设计

大型飞机增升装置的研制不仅需要其提供足够的气动性能,也需要对噪声、舒适性等进行综合考量设计,而增升装置是提高大型飞机综合性能的重要系统,也是目前技术发展亟待研究和解决的重要问题。对于增升装置机构设计,通过设计较为简单的铰链襟翼机构来引导襟翼达到较优位置,然后选择气动性能较好的位置作为新的优化位置,求得较优机构位置。机构位置改变结合气动性能验证需要进行大量的迭代计算以及结果优化,因此以机构设计为基础,探究多目标优化计算的新方法,最终实现气动结构一体化设计目标。选用铰链式后缘襟翼为研究对象,综合考量后缘襟翼旋转与扰流板下偏联合运动对于气动性能影响,利用所研究方法,对其进行气动机构一体化设计并得出设计结果。     

Passive attitude stabilization of ionic-wind-powered micro air vehicles

The ionic-wind-powered Micro Air Vehicles (MAVs) can achieve a higher thrust-to-weight ratio than other MAVs. However, this kind of MAV has not yet achieved controlled flight because of the unstable thrust produced by the ionic wind and the dynamic instability related to the small size. In this paper, a passive attitude stabilization method of the ionic-wind-powered MAV using air dampers is introduced. The key factors that influence the performance of the air dampers, including the layout, position, and area of the air dampers, are theoretically studied. The appropriate optimal position of the air dampers is also obtained by Monte Carlo stochastic simulations. Then the proposed passive attitude stabilization method is applied to the ionic-wind-powered MAVs of different wingspan (2 cm and 6.3 cm). Finally, the experimental results show that using the proposed method, attitude stabilization is achieved for the first time for the ionic-wind-powered MAV. Moreover, the altitude control of an ionic-wind-powered MAV with a wingspan of 6.3 cm is also demonstrated.     

Influence and experiment of cable-net manufacturing errors on surface accuracy of mesh reflector antennas

Cable-net structures are of substantial importance in the construction of large mesh reflector antennas. Owing to the inevitable errors in their manufacturing process, the reflector surface accuracy deteriorates. This study makes a comprehensive investigation of random manufacturing errors during constructing the mesh reflector antennas, and analyze its influence on reflector surface accuracy. Firstly, the sensitivity of reflector surface accuracy with respect to the random errors of the unstressed cable length is mathematically deducted. Secondly, a non-button connecting method is proposed and analyzed to reduce manufacturing errors. Thirdly, two physical experiment models based on 2.62-meter mesh reflector antenna are made. Finally, numerical examples and experimental tests are given to demonstrate the effectiveness of the proposed method. Compared with the traditional method, the proposed method can effectively reduce the influence of the manufacturing errors on the reflector surface accuracy. Moreover, the reduction in the sizes of the nodes also reduces the risk of entanglement of the mesh reflector antenna during the deployment process, and thereby improves the deployment reliability.     

一种基于实测点云数据的壁板类零件修配加工路径计算方法

针对飞机壁板类零件采用修配法装配过程中需要精确获取修配加工路径的问题，提出一种基于实测点云数据的壁板类零件修配加工路径计算方法。首先设计一种基于法线差的特征点检测算法提取参考壁板的初始特征点。然后建立迭代收缩优化模型对初始特征点进行收缩优化，得到参考壁板的准确特征点。最后根据工装定位孔特征进行配准，将参考壁板的特征点映射到待修配壁板上，并将映射后的特征点按照一定顺序进行连接，得到待修配壁板的修配加工路径，按照修配路径进行加工，获得壁板装配配合边界。实验表明，该方法能够精确提取待修配壁板修配加工路径，并且经过加工验证，壁板试验件对缝间隙获得小于1.2 mm的实际效果。     

Optimization for aerodynamic performance of double serpentine nozzles with spanwise offsets using Taguchi-based CFD analysis

Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics. Based on the layout characteristics within a confined space, a series of double serpentine nozzles with spanwise offsets are established. Using computational fluid dynamics and Taguchi method, the influence mechanisms of the Distribution of Area (DA), Distributions of Centerline for the first and second ‘S’ sections in the Vertical direction (DCV1 and DCV2), and Distribution of Centerline in the Spanwise direction (DCS) are analyzed. The impact of these factors on the total pressure recovery coefficient can be ranked as DA > DCV2 > DCS > DCV1, whereas their impacts on the discharge coefficient and axial thrust coefficient can be ranked as DCV2 > DCS > DA > DCV1. Considering the statistical significance of these factors, a nozzle in which DA changes rapidly at the exit and DCV1, DCV2, and DCS change rapidly at the entrance gives the best aerodynamic performance. Compared to the worst configuration, the total pressure recovery coefficient, discharge coefficient, and axial thrust coefficient are improved by 1.6%,3.5% and 3.6%, respectively. DA influences the gas flow acceleration in the entire serpentine channel, resulting in different wall shear stress and friction losses. The various centerline distributions influence the gas flow acceleration effects and form complex wave structures in the constant-area extension section, resulting in different local and friction losses.     

高熵陶瓷研究进展

高熵陶瓷是一类新兴的陶瓷材料,因其独特的结构和性能,近年来受到广泛的关注.本文从高熵陶瓷的定义出发,通过概述固相反应法、前驱体热解法以及放电等离子烧结法等高熵陶瓷制备方法,介绍了合成高熵陶瓷的工艺流程;并且详细阐述了近年来高熵氧化物、高熵碳化物、高熵二硼化物等体系的高熵陶瓷的研究成果,对不同体系的高熵陶瓷的特点和应用前...