Acceleration of energetic particles by whistler waves in active space experiment with charged particle beams injection

In this paper the investigation of wave-particle interaction during simultaneous injection of electron and xenon ion beams from the satellite Intercosmos-25 (IK-25) carried out using the data of the double satellite system with subsatellite Magion-3 (APEX). Results of active space experiment devoted to the beam-plasma instability are partially presented in the paper Baranets et al. (2007). A specific feature of the experiment carried out in orbits 201, 202 was that charged particle flows were injected in the same direction along the magnetic field lines B₀ so the oblique beam-into-beam injection have been produced. Results of the beam-plasma interaction for this configuration were registered by scientific instruments mounted on the station IK-25 and Magion-3 subsatellite. Main attention is paid to study the electromagnetic and longitudinal waves excitation in different frequency ranges and the energetic electron fluxes disturbed due to wave-particle interaction with whistler waves. The whistler wave excitation on the 1st electron cyclotron harmonic via normal Doppler effect during electron beam injection in ionospheric plasma are considered.     

TA15钛合金电子束焊接接头不同区域的疲劳裂纹扩展行为研究

对TA15电子束焊接接头的熔凝区和热影响区的显微组织、硬度、疲劳裂纹扩展速率、以及疲劳断口形貌进行了研究。结果表明:熔凝区的显微组织主要为粗针状α′马氏体组织,热影响区组织为α′马氏体组织+条片状的α相和β相,由接近熔凝区组织向母材组织过渡。母材的硬度较低,熔凝区平均硬度最高,热影响区的硬度介于两者之间。疲劳裂纹扩展速率高低与其显微组织密切相关,含塑性较好的片状α相较多的热影响区比熔凝区有较高的裂纹扩展抗力。     

Timoshenko梁振动的模态控制方法

分析了Timoshenko梁振动特性,得出其简化模型及其在外力作用下的传递函数,然后分析了压电材料PZT对梁振动的作用,得到它的传递函数。设计控制系统并分别设计人工神经元网络辨识器及其控制器,给出振动控制系统的仿真结果并进行分析。     

Variation of ionospheric electron and ion temperatures during periods of minimum to maximum solar activity by the SROSS-C2 satellite over Indian low and equatorial latitudes

To study the variation of ionospheric electron and ion temperatures with solar activity the data of electron and ion temperatures were recorded with the help of Retarding Potential Analyzer payload aboard Indian SROSS-C2 satellite at an average altitude of ∼500 km. The main focuses of the paper is to see the diurnal, seasonal and latitudinal variations of electron and ion temperatures during periods of minimum to maximum solar activity. The ionospheric temperatures in the topside show strong variations with altitude, latitude, season and solar activity. In present study, the temperature variations with latitude, season and solar activity have been studied at an average altitude ∼500 km. The peak at sunrise has been observed during all seasons, in both electron and ion temperatures. Further, the ionospheric temperatures vary with latitude in day time. The latitudinal variation is more pronounced for low solar activity than for high solar activity.     

圆筒形铆接结构中铆钉的数值模拟

介绍了有限元计算中耦合节点法、多点约束(MPC)单元和梁单元等三种铆钉模拟方法的原理和使用方法。以某导弹结构抽象出的圆筒型铆接结构为例,分别用三种方法模拟结构中的铆钉,通过对三种方法的有限元结果进行比较分析,得出结论:三种方法均可正确合理的模拟铆钉;对以剪切破坏、挤压破坏和两者的组合破坏为主的圆筒型铆接结构可以采用耦合节点法模拟铆钉;对于需要考虑铆钉所受轴力的情况,可以采用MPC单元法或梁单元法模拟铆钉。     

示踪气体法求客舱通风量和空气龄的方法

 传统的用浓度变化求通风量的公式是建立在单室通风模型上的。通过建立示踪气体质量平衡方程式可得到用单种示踪气体和多种示踪气体浓度变化求客舱（多室）通风量和渗风量的方法。为了提高客舱内空气品质,引入了空气龄的概念并给出了由客舱内典型点的示踪气体的浓度求空气龄及通风效率的方法。     

激光选区熔化成形TC4钛合金的电子束焊接气孔缺陷控制研究

激光选区熔化(SLM)增材制造技术常用于格栅、腔体结构、燃烧室组件等航空、航天、兵器领域复杂小型零件的制造.为了适应大尺寸零部件的制造,较为理想的方案是采用分段增材成形+拼焊连接的方案,针对SLM成形TC4钛合金进行了电子束焊接工艺验证研究,分析了SLM成形材料焊接气孔缺陷及其产生原因,探讨了不同焊接工艺对气孔缺陷的改...     

80C31微处理器单粒子效应敏感性地面试验研究

文章针对不同厂家的80C31微处理器,利用重离子、锎源模拟源进行单粒子效应地面试验研究。详细介绍了80C31微处理器单粒子效应试验原理、试验方法、试验系统的软硬件组成以及试验取得的结论。通过试验研究获得了80C31微处理器单粒子翻转和单粒子锁定特征参数。研究结果可为被测器件在卫星型号的使用提供技术参考依据。     

Integrated batteries layout and structural topology optimization for a solar-powered drone

The purpose of this paper is to demonstrate an integrated optimization scheme for a solar-powered drone structure. Consider a primary beam in the wing of large aspect ratio, where 100 lithium batteries are assembled. In the proposed integrated optimization, the batteries are considered here as parts of the load-carrying structure. The corresponding mechanical behaviors are simulated in the structural design and described with super-elements. The batteries layout and the structural topology are then introduced as mixed design variables and optimized simultaneously to achieve an accordant load-carrying path. Geometrical nonlinearity is considered due to the large deformation. Different periodic structural configurations are tested in the optimization in order to meet the structural manufacturing and assembly convenience. The optimized designs are rebuilt and tested in different load cases. Maintaining the same structural weight, the global mechanical performances are improved greatly compared with the initial design.     

W波段多注交错双栅行波放大器的高频特性

提出了一种采用平面线性排列的3个圆形电子注代替平面带状电子注的W波段交错双栅行波放大器微型化慢波高频结构,并重点对其行波传输特性和输入输出耦合特性进行了仿真设计和参数优化.结果表明,这种平面微型化高频结构的行波传输色散特性良好且有很大的工作带宽,所产生的强轴向电场分布非常有利于电子注与高频场的能量交换和相互作用.在保证平面微型结构中圆形注通道直径和带状注通道高度相同的情况下,得到的耦合阻抗是带状注交错双栅慢波高频系统2~3倍,为行波放大器高效率的注波互作用和高功率输出提供了新的研究思路.为了与该交错双栅高频系统相匹配,提出了一种更为简单易行的输入与输出耦合结构,仅采用三周期渐变过渡段就可以实现反射系数S₁₁在较宽频带内低于-20dB的良好结果,更有利于行波放大器未来的工程实现与应用.