无网格法耦合RNG k-ε湍流模型在亚、跨声速翼型黏性绕流中的数值模拟

基于移动最小二乘无网格方法,耦合RNG(Re-Normalisation Group)k-ε湍流模型求解雷诺平均Navier-Stokes方程。采用AUSM(Advection Upstream Splitting Method)+-up迎风格式求解数值通量,应用在高度各向异性点云结构中取得良好结果的点云重构技术结合移动最小二乘法拟合空间导数,并用三阶SSP(Strong Stability Preserving)型Runge-Kutta显式时间推进格式求解离散后的控制方程。在此基础之上,实现了对NACA0012、RAE2822翼型亚、跨声速黏性绕流的数值模拟,给出了翼型表面压力系数分布曲线、不同位置处的平均速度剖面、马赫数等值线等计算结果,并与实验值及相关文献数值模拟结果进行比较,结果吻合较好。表明所发展的结合点云重构技术的无网格方法耦合RNGk-ε湍流模型能够成功模拟翼型亚、跨声速黏性绕流,验证了所提算法的有效性,并拓展了无网格方法求解湍流流动的途径。     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

嫦娥三号着陆器统计定位精度分析

“嫦娥三号”将在月球放置着陆器,实现月面软着陆,因此,需要对着陆器进行精确定位.本文简述了月球着陆器的统计定位方法与协方差分析理论,分析了影响统计定位精度的主要误差源.基于现有测控条件,从跟踪弧段和测量数据组合2个方面,对“嫦娥三号”着陆器的定位精度进行了分析.针对短弧条件下单站测距数据定位不稳键的问题,提出了结合月面高程约束的定位方法.协方差分析结果表明：高程数据的使用可以实现单站30 min测距优于1 km的定位精度;当观测数据累积至3d时,单站测量与VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）的不同组合可以实现同等量级、优于百m的定位精度;测量系统差是制约定位精度的主要因素,完全标校测量的系统偏差则能实现10 m左右的定位精度.     

无线电高度表信号模拟器射频信号延时/衰减模块设计

无线电高度表程控信号模拟器是无线电高度表自动测试系统（ATE,ATS）的重要组成部分,而射频信号延时/衰减模块则是无线电高度表程控信号模拟器3个功能模块组件中的核心模块。研制了一种采用声表面波（SAW）延迟线作为射频信号延时器件、射频衰减器作为射频信号功率衰减器件,通过程控射频开关控制不同声表面波延迟线的切换,包含射频信号变频、放大等结构电路的无线电高度表信号模拟器射频信号延时/衰减模块。经无线电高度表自动测试系统的实际工程应用表明,该无线电高度表射频信号延时/衰减模块对C波段（4.2～4.4 GHz）射频调制信号的延时精度高、衰减范围大,体小、质轻,适合置于无线电高度表测试适配器内部使用,具有较高的工程应用价值。     

尾缘锯齿结构的降噪物理机制实验

对比分析了常规尾缘翼型与锯齿尾缘翼型尾缘湍流流场的基本特征,并通过线阵列的方法测量了两种尾缘结构的噪声.结果表明:锯齿尾缘翼型尾缘湍流流场的湍流强度以及3个方向上的湍流强度都相比于常规尾缘翼型有显著减少,声场结果显示锯齿尾缘翼型对尾缘噪声有显著减小,对前缘噪声影响很小.锯齿结构加宽了尾迹区域并加快了大涡的破碎,产生了额外的马蹄涡,湍流脉动衰减率沿着流动方向变大.      

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

旋翼非定常气动特性CFD模拟的通用运动嵌套网格方法

针对直升机旋翼非定常气动特性CFD模拟中的网格生成难题,提出了一套高效、通用的运动嵌套网格生成方法.首先,基于Poisson方程求解和翻折法生成旋翼桨叶的正交贴体网格.其次,针对旋翼桨叶的扭转分布及变距、挥舞等复杂运动,建立了一套通用的洞单元识别的扰动衍射法;为保证洞包络面的封闭性,完善了挖洞过程中网格加密策略;在洞边界确立基础上,提出了一种高效、鲁棒的最小距离法贡献单元搜索的改进方法.在此基础上,建立了基于RANS(Reynolds-averaged Navier-Stokes)方程的旋翼非定常流场CFD模拟方法.最后,采用所建立的方法分别对悬停和前飞状态下的C-T(Caradonna-Tung)旋翼和7A(Helishape 7A)旋翼的气动特性、桨尖涡的位置进行了计算,计算结果与试验值误差小于5%,验证了该运动嵌套网格生成方法在旋翼非定常气动特性CFD模拟中的有效性.      

航天器贮箱变质量流固耦合系统的动力学响应

研究了航天器贮箱变质量流固耦合系统的动力学特性.根据虚拟质量法(VMM),结合边界元法和有限元法构建了系统的动力学模型,建模过程中着重考虑了质量变化对系统的动态影响.通过Newmark直接积分法计算出贮箱变质量系统的振动响应.结果表明:由于系统质量减少,引起了系统振动频率的增大,并产生一个附加负阻尼.系统的振动频率的范围可以通过系统质量的范围确定.变质量引起的附加负阻尼的大小与系统的质量变化率成正比.对于系统的横向振动,质量减少引起的附加负阻尼在整个过程对系统振动的影响比较稳定,对于系统的纵向振动,质量减少引起的附加负阻尼对系统振动的影响随时间的增加而增大.      

机翼顶起设计解析

飞机全机顶起是飞机维护时必不可少的操作程序,其中机翼顶起是全机顶起的一个重要组成部分。机翼顶起设计包括两个方面内容,即顶垫设计和机翼千斤顶选型。顶垫设计与顶起点结构设计、机翼千斤顶选型是联合设计、相互影响的。     

Determination of thermal expansion coefficients for unidirectional fiber-reinforced composites

In the present work, the coefficients of thermal expansion（CTEs） of unidirectional（UD）fiber-reinforced composites are studied. First, an attempt is made to propose a model to predict both longitudinal and transverse CTEs of UD composites by means of thermo-elastic mechanics analysis. The proposed model is supposed to be a concentric cylinder with a transversely isotropic fiber embedded in an isotropic matrix, and it is subjected to a uniform temperature change. Then a concise and explicit formula is offered for each CTE. Finally, some finite element（FE） models are created by a finite element program MSC. Patran according to different material systems and fiber volume fractions. In addition, the available experimental data and results of other analytical solutions of CTEs are presented. Comparisons are made among the results of the cylinder model,the finite element method（FEM）, experiments, and other solutions, which show that the predicted CTEs by the new model are in good agreement with the experimental data. In particular, transverse CTEs generally offer better agreements than those predicted by most of other solutions.