Demonstration of a high sensitivity GNSS software receiver for indoor positioning

Advances in signal processing techniques contributed to the significant improvements of GNSS receiver performance in dense multipath environments and created the opportunities for a new category of high-sensitivity GNSS (HS-GNSS) receivers that can provide GNSS location services in indoor environments. The difficulties in improving the availability, reliability, and accuracy of these indoor capable GNSS receivers exceed those of the receivers designed for the most hostile urban canyon environments. The authors of this paper identified the vector tracking schemes, signal propagation statistics, and parallel processing techniques that are critical to a robust HS-GNSS receiver for indoor environments and successfully incorporated them into a fully functional high-sensitivity software receiver. A flexible vector-based receiver architecture is introduced to combine these key indoor signal processing technologies into GSNRx-hs™ – the high sensitivity software navigation receiver developed at the University of Calgary. The resulting receiver can perform multi-mode vector tracking in indoor environment at various levels of location and timing uncertainties. In addition to the obvious improvements in time-to-first-fix (TTFF) and signal sensitivity, the field test results in indoor environments surrounded by wood, glass, and concrete showed that the new techniques effectively improved the performance of indoor GNSS positioning. With fine GNSS timing, the proposed receiver can consistently deliver indoor navigation solution with the horizontal accuracy of 2–15 m depending on the satellite geometry and the indoor environments. If only the coarse GNSS timing is available, the horizontal accuracy of the indoor navigation solution from the proposed receiver is around 30 m depending on the coarse timing accuracy, the satellite geometry, and the indoor environments. From the preliminary field test results, it has been observed that the signal processing sensitivity is the dominant factor on the availability of the indoor navigation solution, while the GNSS timing accuracy is the dominant factor on the accuracy of the indoor navigation solution.     

基于鲁棒自适应反步法的航天器姿态跟踪控制

针对存在未知惯量矩阵和外干扰的刚体航天器姿态跟踪,提出了一种鲁棒自适应控制方法。综合自适应反步法和非线性L2增益干扰抑制方法,用自适应反步法构造系统的Lyapunov函数,获得了具L2增益的鲁棒自适应控制器,以保证姿态跟踪误差系统为一致最终有界稳定,确保估计的航天器惯量参数的有界性,并使从外干扰输入到评价输出的L2增益不大于给定值。仿真结果验证了方法的有效性和可行性。     

GNSS接收机数字载波跟踪环建模与噪声性能分析

针对GNSS接收机高灵敏度跟踪问题,研究数字载波跟踪环热噪声相位颤动与相干积累时间长度的关系.在分析I·Q鉴相器的Costas载波环信号处理流程的基础上,建立了新的环路线性化模型.基于该模型,推导了由最佳模拟环路滤波器双线性变换离散化得到的数字载波跟踪环的噪声性能.数值分析表明:采用I·Q鉴相器的二阶、三阶数字载波环热噪声相位颤动,随相干积累时间的增大先减小后增大,存在热噪声相位颤动最小意义上的最佳相干积累时间.仿真结果验证了理论分析结论,同时表明新建模型对数字载波跟踪环的描述比传统模型更准确.文中给出的各载噪比和环路带宽组合条件下的最佳相干积累时间,可用于指导高灵敏度接收机载波跟踪环设计.     

运载器末助推段非线性姿态控制器设计

根据单摆模型近似晃动质量推导晃动运动与姿态运动的动力学方程,基于状态相关黎卡提方程方法,综合动态逆控制方法设计了运载器末助推段非线性姿态控制器,由状态反馈实现姿态跟踪和晃动抑制。因实际中模拟晃动运动的单摆状态无法测量,引入输出多采样率技术,通过在一个采样周期内多次检测被控对象的输出估计状态,实现设计的状态反馈控制律。数...     

基于梯度方向二值模式特征的飞机翼尖跟踪技术

研究基于视频图像分析与定位的飞机翼尖跟踪技术,为飞机地面移动提供安全保障.现有图像特征进行翼尖跟踪经常失效且计算效率低下,本文结合纹理和轮廓信息,提出以梯度方向二值模式( OG_ LBP)为特征的粒子滤波跟踪算法,降低特征维数的同时建立局部和全局的翼尖特征直方图描述,提高识别效果.同时,该算法在粒子滤波基本框架之下,结...     

噪声干扰环境下基于实测数据的多目标航迹起始算法

雷达在受到噪声干扰的条件下会产生大量杂波.这时,如何完成航迹的快速起始是个值得研究的问题.结合干扰环境下的实测数据,分别采用逻辑法和修正逻辑法对其进行了研究分析,得出了一些有意义的结论.仿真结果表明,该方法很好地克服了3/4逻辑法因虚假目标过多而无法正常起始的问题,并且具有对存储要求较低、计算量较小、便于工程实现的特性...     

DIRECT NUMERICAL SIMULATIONS OF MULTIPHASE FLOWS

INTRODUCTIONMultiphase and multifluid flows are commonin many natural and technologically importantprocesses. Rain,spray combustion,spray paint-ing,and boiling heat transfer are just a few ex-amples.While it is the overall,integral charac-teristics of such flows that are of most interest,the global behavior is determined to a large de-gree by the evolution of the smallestscales in theflow.The combustion of sprays,for example,depends on the size and the number density ofthe drops.Generally…     

一个用于目标跟踪的改进粒子滤波算法

简化UT（unscented transformation）转化参数，修改UKF（unscented Kalmanfilter）提议分布，提出了改进的粒子滤波算法。调节因子的增加使得能在线自适应估计，滤波性能提高，并形成一个自适应的算法。仅有角测量的目标跟踪仿真试验证实了改进的粒子滤波算法要优于其它滤波方式。     

一种非链式非完整球形机器人的反步轨迹跟踪控制器(英文)

Spherical robot has good static and dynamic stability, which provides it with strong viability in hostile environment, but the lack of effective control methods has hindered its application and development. This article deals with the dynamic trajectory tracking problem of the spherical robot BHQ-2 designed for unmanned environment exploration. The dynamic model of the spherical robot is established with a simplified Boltzmann-Hamel equation, based on which a trajectory tracking controller is designed by using the back-stepping method. The convergence of the controller is proved with the Lyapunov stability theory. Numerical simulations show that with the controller the robot can globally and asymptotically track desired trajectories, both linear and circular.     

捷联式反辐射导引头角跟踪技术研究

对于工作在低频段的地空反辐射导引头,传统的稳定平台式导引头无法满足小口径要求,为此采用捷联干涉仪体制。但是采用该体制后,天线是固定安装在弹体上的,无法直接提取比例导引指令,必须寻求新的解决方案。针对该问题,提出采用捷联式角跟踪与解耦方法来消除导引头的弹体姿态扰动耦合,实现视线稳定跟踪。首先,给出了捷联式角跟踪与解耦技术的工作原理与实现方法,在此基础上,对系统进行了仿真建模与性能分析。结果表明,测量误差和噪声较小时,该方法能获得较好的解耦与跟踪性能,所得结果为捷联式导引头角跟踪系统的工程实现提供了理论基础,也为未来导引头的小型化需求提供了一种新的解决方案。