基于叶尖定时的叶片耦合振动参数辨识与仿真

为了实时掌握叶片振动情况、预防故障发生,目前最常用的非接触振动测量方法是基于单自由度模型的叶尖定时法,但当叶片耦合振动时2个振动峰相隔很近,该方法无法同时识别出其振动参数。采用基于2自由度模型的曲线拟合方法,得到叶片耦合振动2个峰的初始相位等参数,用相位遍历法辨识出叶片的振动阶次和频率。结果表明:采用基于2自由度模型的曲线拟合方法提高了叶片耦合振动参数辨识的精度,辨识了相邻2个峰的振动参数。辨识振动与仿真参数设置基本一致。     

分布式计算机技术在飞机非标测控设备中的应用和实现

在研究、分析和总结分布式计算机技术与系统实现的基础上，以苏-27战斗机火控雷达天线部件性能测控系统研制过程为例，详细论述了分布式计算机测控系统的实现模式，介绍了一种先进合理的非标测控设备设计解决方案和快捷、低成本的系统实用集成方案。     

Direct integration methods in dynamic problems of structural mechanics

A method of direct integration with respect to time is proposed to solve dynamic problems of structural mechanics and comparison with the well-known methods is presented.     

EXPERIMENT RESEARCH ON DYNAMIC LOAD IDENTIFICATION TECHNOLOGY BASED ON GENERALIZED ORTHOGONAL POLYNOMIAL THEORY (GOPT)

Dynamicloadisoneoftheimportantoriginalparametersinstructuraldynamicanalysis.Ithasobviousinfluencestodynamicsdesign,vibrationcontrols,activecontroltechnologyandsoon.Sincel97O,manyresearchitemsinthisfieldhavebeenaccomplishedintheworld-Sometheoriesandexperimentalmethodsofdynamicloadidentificationhadbeencreatedinfrequencydomain[l'2J-Howeverftherearesomedisadvantagesthattheycouldbeadaptedonlytoidenti-fythesteady-stateloadandnottoidentifythetransientload,suchasshockloadwithshortsampling.Forvarious…     

GPS/INS超紧组合载波跟踪环路最优带宽在线设计

在全球定位系统和惯性导航系统组成的超紧耦合系统中,卫星信号的跟踪性能直接取决于载波跟踪环路的带宽。为提高最优带宽的计算精度,在对惯导辅助下载波跟踪环路跟踪特性进行分析的基础上,详细推导了载波多普勒频率估计误差、多普勒频率变化率估计误差的计算方式,建立了惯导辅助下的环路跟踪误差模型;在实时估计跟踪载噪比的基础上,应用离散牛顿二阶梯度法迭代解算最优带宽,并进行实时调整。仿真结果表明,所设计最优带宽迭代解算方法的计算精度能够在11次迭代内达到99.6%,以此作为环路的带宽,能够在弱信号、辅助信息精度较低的情况下有效提高环路的跟踪精度。     

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

A new bearing fault diagnosis method based on modified convolutional neural networks

Fault diagnosis is vital in manufacturing system. However, the first step of the traditional fault diagnosis method is to process the signal, extract the features and then put the features into a selected classifier for classification. The process of feature extraction depends on the experimenters’ experience, and the classification rate of the shallow diagnostic model does not achieve satisfactory results. In view of these problems, this paper proposes a method of converting raw signals into two-dimensional images. This method can extract the features of the converted two-dimensional images and eliminate the impact of expert’s experience on the feature extraction process. And it follows by proposing an intelligent diagnosis algorithm based on Convolution Neural Network (CNN), which can automatically accomplish the process of the feature extraction and fault diagnosis. The effect of this method is verified by bearing data. The influence of different sample sizes and different load conditions on the diagnostic capability of this method is analyzed. The results show that the proposed method is effective and can meet the timeliness requirements of fault diagnosis.     

Assessment of between-floor structural and topological properties on cognitive map development in multilevel built environments

The present study investigated cognitive map development in multilevel built environments. Three experiments were conducted in complex virtual buildings to examine the effects of five between-floor structural factors that may impede the accuracy of humans’ ability to build multilevel cognitive maps. Results from Experiments 1 and 2 (of three experiments) revealed that difficulties in developing multilevel cognitive maps are not solely caused by the z-axis offset, as is suggested in the literature, but are due to the factorial combination of a between-floor overlap and a z-axis offset. Results from Experiment 2 showed that this process becomes substantially more difficult when the reference directions between different floors have an angular offset from each other. Finally, results from Experiment 3 demonstrated that confusing between-floor heading shifts in aligned buildings did not make it reliably harder to build multilevel cognitive maps. The implications of these findings are discussed in terms of theories of mental representations in multilayered three-dimensional spaces, as well as for architectural design.     

失效概率矩独立全局灵敏度分析的高效算法

失效概率矩独立全局灵敏度分析对指导可靠性优化至关重要，本文从乘法降维及Edgeworth级数展开的角度提出一种失效概率矩独立全局灵敏度指标分析的高效算法。所提算法通过Edgeworth级数展开将失效概率矩独立全局灵敏度指标的求解转化为输出无条件及条件前四阶整数矩的求解。对于输出的无条件及条件四阶矩的计算，基于乘法降维的思想，本文推导了重复利用计算输出的无条件矩的输入输出样本来计算条件矩以及外层关于输入变量一维积分的计算公式，使得仅需重复利用输出无条件前四阶矩求解产生的积分网格内的数据即可同时求得输出的前四阶条件矩以及外层关于输入变量的一维积分。所提算法大大提高了失效概率矩独立全局灵敏度的分析效率。航空发动机涡轮盘以及汽车前轴的分析结果验证了所提算法的高效性及准确性。     

Distributed intelligent self-organized mission planning of multi-UAV for dynamic targets cooperative search-attack

This article studies the cooperative search-attack mission problem with dynamic targets and threats, and presents a Distributed Intelligent Self-Organized Mission Planning (DISOMP) algorithm for multiple Unmanned Aerial Vehicles (multi-UAV). The DISOMP algorithm can be divided into four modules: a search module designed based on the distributed Ant Colony Optimization (ACO) algorithm, an attack module designed based on the Parallel Approach (PA) scheme, a threat avoidance module designed based on the Dubins Curve (DC) and a communication module designed for information exchange among the multi-UAV system and the dynamic environment. A series of simulations of multi-UAV searching and attacking the moving targets are carried out, in which the search-attack mission completeness, execution efficiency and system suitability of the DISOMP algorithm are analyzed. The simulation results exhibit that the DISOMP algorithm based on online distributed down-top strategy is characterized by good flexibility, scalability and adaptability, in the dynamic targets searching and attacking problem.