空气动力对薄膜结构动力特性的影响规律

薄膜结构刚度小、自重轻、自振频率低,对外力作用非常敏感,因此在分析其动力特性时应考虑到空气与结构的耦合作用。本文利用附加空气质量、辐射阻尼和气承刚度这一简化气动力模型来考虑空气与振动薄膜结构之间的相互作用。分别推导了附加空气质量、辐射阻尼和气承刚度的计算方法及其相应的变化规律。并进一步采用算例分析对结构在空气中的自由振动和受迫简谐振动进行了系统分析,同时探讨了气动力对薄膜结构动力特性的影响规律。     

空间站充气式下载系统的概念研究

空间站充气式下载系统 (IDS)是在俄罗斯充气式再入与降落技术 (IRDT)基础上发展起来的一种新概念航天回收技术。详细介绍了IDS基本概念和工作原理 ,通过与传统降落伞回收方式的比较 ,总结了该技术的特点。讨论了该技术对结构、轨道、气动力、气动热、热防护层等关键子系统的设计需求。归纳了国外研究现状及发展趋势 ,分析了航天和军事领域的应用前景。     

膜分离器及其机载应用

为了满足飞机放火防爆要求，膜分离器作为机载油箱惰化系统的关键部件在国外军、民机已经装机使用，在国内膜分离器处于研制阶段，正逐步向军、民用飞机推广应用。分析了国内外现状，对膜分离器工作机理进行了阐述，详细论述了膜分离器研制过程中涉及到的膜材料、膜制备工艺、膜分离器，总结了影响膜分离器性能的主要参数；进行了膜分离器在机载惰化中应用的试验研究，总结了研发和应用中得到的经验，有利于膜分离器今后的研发和机载惰化中的应用。     

Design of aircraft structures against threat of bird strikes

In this paper, a method to design bird-strike-resistant aircraft structures is presented and illustrated through examples. The focus is on bird strike experiments and simulations. The explicit finite element software PAM-CRASH is employed to conduct bird strike simulations, and a coupled Smooth Particles Hydrodynamic (SPH) and Finite Element (FE) method is used to simulate the interaction between a bird and a target structure. The SPH method is explained, and an SPH bird model is established. Constitutive models for various structural materials, such as aluminum alloys, composite materials, honeycomb, and foam materials that are used in aircraft structures, are presented, and model parameters are identified by conducting various material tests. Good agreements between simulation results and experimental data suggest that the numerical model is capable of predicting the dynamic responses of various aircraft structures under a bird strike, and numerical simulation can be used as a tool to design bird-strike-resistant aircraft structures.     

Fatigue life research and experimental verification of superalloy thin-walled structures subjected to thermal-acoustic loads

Rapid alternating stress is formed in structure subjected to harsh thermal-acoustic loads, which will affect fatigue performance and reduce fatigue life seriously. First, fatigue experiment of superalloy thin-walled structure was carried out to obtain fatigue damage location and failure time of the experiment specimen, and S-N curves of superalloy thin-walled structure at 723 K were fitted. Then, dynamic response simulation of superalloy thin-walled structure under the same load as experiment was implemented, and fatigue life was estimated based on the fatigue life prediction model which mainly included: improved rain-flow counting method, Morrow average stress model and Miner linear cumulative damage theory. Further, comparisons between simulation solutions and experimental results achieved a consistency, which verified the validity of the Fatigue Life Prediction Model (FLPM). Moreover, taking a rectangle plate as the analysis object, the distributions of Fain-low circulation blocks and damage levels of the structure were discussed respectively. Finally, current research indicates that in pre-buckling the structure is in softened area and fatigue life decreases with the increase of temperature; in post-buckling the structure is in hardened area and fatigue life increases with the increase of temperature within a certain range.     

基于Kriging形函数的线性时变结构模态参数辨识

近年来,对航空航天飞行器随时间变化的动力学特性研究需求越来越迫切。仅输出参数化时域的时变时间序列模型以其结构简约、精度高且跟踪能力强而成为研究热点,尤其是泛函向量时变自回归(FS-VTAR)模型已经得到了广泛应用。然而传统的FS-VTAR模型在保证其辨识优势的同时却需要针对不同时变结构选择合适的基函数形式及较高的基函数阶数,该过程相当复杂且耗时。本文借鉴无网格法中移动最小二乘(MLS)法构造形函数的思想,提出一种基于Kriging形函数的线性时变结构模态参数辨识方法。该方法首先引入自适应于辨识信号的Kriging形函数;再把时变系数在形函数上线性展开,利用最小二乘(LS)法得到形函数的展开系数;最后把时变模型特征方程转换为广义特征值问题提取出模态参数。利用时变刚度系统非平稳振动信号验证该方法,结果表明:基于Kriging形函数的FS-VTAR模型相比于传统的FS-VTAR模型能有效地避免基函数形式的选择和较高的基函数阶数,且精度相当;相比于移动最小二乘法能有效地解决其数值条件问题且具有更高的模态参数辨识精度。     

Active vibration control of piezoelectric bonded smart structures using PID algorithm

Thin-walled structures are sensitive to vibrate under even very small disturbances. In order to design a suitable controller for vibration suppression of thin-walled smart structures, an electro-mechanically coupled finite element(FE) model of smart structures is developed based on first-order shear deformation(FOSD) hypothesis. Considering the vibrations generated by various disturbances, which include free and forced vibrations, a PID control is implemented to damp both the free and forced vibrations. Additionally, an LQR optimal control is applied for comparison.The implemented control strategies are validated by a piezoelectric layered smart plate under various excitations.     

Experimental study of partially-cured Z-pins reinforced foam core composites：K-Cor sandwich structures

This paper presents an experimental study of a novel K-Cor sandwich structure rein- forced with partially-cured Z-pins. The influence of pultrusion processing parameters on Z-pins characteristics was studied and the effect of Z-pins on mechanical properties was disclosed. Differential scanning calorimetry （DSC） and optical microscopy （OM） methods were employed to determine the curing degree of as-prepared Z-pins and observe the implanted Z-pins in the K-Cor structure. These partially-cured Z-pins were treated with a stronger bonding link between face sheets and the foam core by means of a hot-press process, thereby decreasing burrs and cracking defects when the Z-pins were implanted into the Rohacell foam core. The results of the out-of-plane tensile tests and the climbing drum peel （CDP） tests showed that K-Cor structures exhibited superior mechanical performance as compared to X-Cor and blank foam core. The observed results of failure modes revealed that an effective bonding link between the foam core and face sheets that was provided from partially-cured Z-pins contributed to the enhanced mechan- ical performances of K-Cor sandwich structures.     

薄膜充气梁失稳载荷研究

针对薄膜充气梁在弯曲载荷下的失稳载荷问题,进行了理论及试验研究,得到充气模型失稳载荷的理论值和试验值,两者对比显示试验值高于理论值1.56倍以上,为在使用过程中充分利用充气模型的承载能力提供了有效的数据。     

柔性空间结构选频二阶保结构平衡降阶

利用传统的一阶选频内平衡降阶方法进行降阶时,不但破坏了原二阶系统动力学结构,而且降阶过程中的选频Gramian矩阵的求解计算量大、数值稳定性差.利用解耦模态坐标的二阶柔性空间结构(FSS)方程的特殊性,给出了可控和可观Gramian矩阵的选频闭合解析解.为了将FSS动力学模型在指定频段进行降阶并保留原系统的二阶动力学结...