多卜勒湍流检测

对湍流目标进行检测,是多卜勒效应在现代机载气象雷达中的应用。鉴于目前在新型机载气象雷达中普遍装备了湍流信号处理电路,本文就有关的湍流目标及其检测原理和方法作简要介绍。     

转轴位置对俯仰动态特性的影响

研究了转轴位置对机翼、机身和三个组合体上翼面的动态特性的影响，对于机翼和机身，当转轴位置后移时其动态迟滞效应更为强烈。当翼面处于转轴之前，上仰时会出现更为的动态迟滞效应。因此鸭翼达到失速状态较晚。而当翼面处于转轴之后时，如尾翼，将会更早地出现动失速，转轴位置对动态迟滞特性的影响可以认为主要是由于俯仰运动时的动态洗流影响所导致的实际有效迎角的变化。由此影响了动态分离涡及其发展。     

高压不稳定环境中的燃料液滴蒸发

对燃料液滴在高压不稳定环境中的蒸发进行了研究，着重讨论了气相介质压力振荡对液滴蒸发特性的影响，计算了Ｃ１２Ｈ２６液滴在Ｎ２介质中蒸发时的蒸发速率、滴温和无因次滴径随时间的变化。结果表明：（１）蒸发速率、滴温发生相同频率的振荡，相位滞后分别为π和π／２；（２）压力振荡使蒸发速率平均值增大，液滴生存时间减少；（３）在不定常加热阶段压力振荡影响很小。     

The Plasma Environment of Comet 67P/Churyumov-Gerasimenko Throughout the Rosetta Main Mission

The plasma environment of comet 67P/Churyumov-Gerasimenko, the Rosetta mission target comet, is explored over a range of heliocentric distances throughout the mission: 3.25 AU (Rosetta instruments on), 2.7 AU (Lander down), 2.0 AU, and 1.3 AU (perihelion). Because of the large range of gas production rates, we have used both a fluid-based magnetohydrodynamic (MHD) model as well as a semi-kinetic hybrid particle model to study the plasma distribution. We describe the variation in plasma environs over the mission as well as the differences between the two modeling approaches under different conditions. In addition, we present results from a field aligned, two-stream transport electron model of the suprathermal electron flux when the comet is near perihelion.     

目标电磁散射特性的混合法研究

从Ｓｔｒａｔｔｏｎ－Ｃｈｕ公式出发，利用阻抗边界条件，得出阻抗边界条件积分方程，将目标表面分成不同的区域，有些区域用高频解析方法求出其表面电流，有些区域利用矩量法解阻抗边界条件积分方程得表面电流。本文以橄榄体（包括介质涂敷情形）为例，计算其电磁散射特性，混合法计算结果与实测结果或其他方法的计算结果比较吻合。     

改进力控方案完成异形孔装配

讨论了改进的力／位混合控制方案、异形孔装配策略规划及其在ＪＲＢ－１机器人上的实现。简述了该方案的优点，在ＪＲＢ－１机器人上实现所解决的问题，提出用适应性增益解决力控环稳定问题。文中还结合异形孔装配给出了装配任务的描述和装配策略的自动生成方法。     

Principal components in the PG-X-ray QSO sample

We have performed a spectral principal component analysis for a complete sample of 22 low redshift QSOs with spectra from Ly to H, and found three significant principal components, which account for 78% of the spectrum-to-spectrum variance. We present strong arguments that the first principal component represents the Baldwin effect, relating equivalent widths to the luminosity (i.e. accretion rate). The second component represents continuum variations, probably dominated by intrinsic reddening. The third principal component is directly related to broad emission-line width and X-ray spectral index, and therefore probably driven by Eddington accretion ratio, L/L_Edd. The third set of relationships tie directly to the optical Principal Component 1 found by Boroson and Green [Boroson, T., Green, R.F., Astrophys. J. Suppl. 80, 109, 1992 (BG92)], and are the primary cause of scatter in the Baldwin relationships.     

基于微型涡喷发动机热喷流的无源流体推力矢量喷管的控制规律

流体推力矢量喷管型面固定、活动部件少、结构重量轻，能够为高机动飞行器提供有效的飞行控制手段，但无源流体推力矢量喷管热喷流的偏转控制规律尚未完全掌握。为了推进无源流体推力矢量技术的实用化，本文设计研制了适用于微型涡喷发动机的耐高温喷管模型，对该喷管在微型涡喷发动机热喷流状态下的控制规律进行研究。利用非接触光学显示和测量手段——红外热成像拍摄和粒子图像测速（PIV）技术对主射流流动特性进行研究，获得流动矢量角随二次流控制阀门闭合度变化的控制规律；利用六分量盒式天平测力实验研究无源流体推力矢量喷管的力学特性，获得推力矢量角随二次流控制阀门闭合度变化的控制规律。研究结果表明：该构型喷管在微型涡喷发动机热喷流下主射流连续可控偏转，最大流动矢量角为-12.3°/12.3°，最大推力矢量角为-12.9°/12.8°，控制规律接近线性，不存在主射流偏转突跳问题。     

绳索断裂对二维二次太阳翼展开过程影响分析

为识别二维二次太阳翼关键环节和预示其在轨展开故障模式，开展不同位置绳索断裂失效对太阳翼展开的影响程度分析。采用考虑绳索断裂的绳索联动轮力学模型，建立了适应于不同联动轮半径的联动轮受力模型，提出角度触发约束消除方法，解决了太阳翼第2次展开过程连续仿真问题，建立了太阳翼第2次展开动力学方程，分析了不同位置绳索断裂失效对太阳翼各板展开角度、展开构型和其他绳索张力的影响。分析表明，越靠近星体的绳索联动机构失效对太阳翼展开过程的影响越大，其中连接架上绳索联动机构失效可直接导致二维二次太阳翼在轨展开失败。     

Effects of Mach numbers on Magnus induced surface pressure

Experimental and numerical methods were used to investigate the Magnus phenomena over a spinning projectile. The pressure force acting on the surface of a spinning projectile was measured for various cases by employing a relatively novel experimental technique. A set of miniature pressure sensors along with a data acquisition board, battery and storage memory were placed inside a spinning model and the surface pressure were obtained through a remotely controlled system. Circumferential pressures of the model for both rotational and static conditions were obtained at two different free stream Mach numbers of 0.4 and 0.8 and at different angles of attack. The results showed the ability of this new test method to measure the very small Magnus force via surface pressures over the projectile. The results provide a deep insight into the flow structure and illustrate changes in the cross-flow separation locations as a result of rotation. Similar results were obtained by the numerical simulations and were compared with the experimental data.