高压液氧供应系统管路设计

高压液氧供应系统是我国压力最高的挤压式液体火箭发动机试验台的关键分系统。在系统设计过程中，通过合理布置管路，设计专用固定支架，采用自然补偿和堆积绝热技术，解决了高压低温推进剂系统管路设计中的难题。该系统顺利通过气密性检查和调试，经多次热试车考核，系统稳定可靠，满足设计要求。     

Longitudinal behaviors of the IRI-B parameters of the equatorial electron density profiles retrieved from FORMOSAT-3/COSMIC radio occultation measurements

The electron density profiles in the bottomside F₂-layer ionosphere are described by the thickness parameter B0 and the shape parameter B1 in the International Reference Ionosphere (IRI) model. We collected the ionospheric electron density (N_e) profiles from the FORMOSAT-3/COSMIC (F3/C) radio occultation measurements from DoY (day number of year) 194, 2006 to DoY 293, 2008 to investigate the daytime behaviors of IRI-B parameters (B0 and B1) in the equatorial regions. Our fittings confirm that the IRI bottomside profile function can well describe the averaged profiles in the bottomside ionosphere. Analysis of the equatorial electron density profile datasets provides unprecedented detail of the behaviors of B0 and B1 parameters in equatorial regions at low solar activity. The longitudinal averaged B1 has values comparable with IRI-2007 while it shows little seasonal variation. In contrast, the observed B0 presents semiannual variation with maxima in solstice months and minima in equinox months, which is not reproduced by IRI-2007. Moreover, there are complicated longitudinal variations of B0 with patterns varying with seasons. Peaks are distinct in the wave-like longitudinal structure of B0 in equinox months. An outstanding feature is that a stable peak appears around 100°E in four seasons. The significant longitudinal variation of B0 provides challenges for further improving the presentations of the bottomside ionosphere in IRI.     

有限元法在光学侧窗热防护设计中的应用

光学侧窗热环境极为严酷,可采用液体对流内冷却技术对光学侧窗进行热防护。以有限元法对光学侧窗温度场进行了分析研究,研究结果表明:该方法计算精度可靠;液体对流内冷却技术能有效起到降温的作用。同时还定量的给出了冷却液用量对结构温度场的影响,为设计的经济可行性提供了保障。     

主燃孔位置对基于RQL高温升燃烧室流动与燃烧特性影响的数值模拟

为将富油燃烧/快速淬熄/贫油燃烧（RQL）用于高温升燃烧室设计，以实现温升与排放的良好统一，对不同主燃孔位置下 的单头部矩形燃烧室流动、淬熄区气流混合、燃烧和排放特性进行数值模拟。结果表明：燃烧室中心回流区的长度和高度随着主 燃孔轴向距离的增大而增大。随着主燃孔轴向距离的增大，主燃孔射流深度增加，射流角度逐渐向下游偏转，导致淬熄区内气流 的混合效果减弱；随着主燃孔位置的后移，富油区内的当量比显著增大，导致CO和碳烟的生成量迅速增加，淬熄区内的沿程高温 区域面积逐渐缩小，燃烧效率逐渐降低。当X/H=0.7时，燃烧室沿程NO生成量始终处在较大值；而当X/H=0.9时，燃烧室沿程NO 生成量始终处于较小值，但CO的生成量增大。     

大型弹簧电镀锌工艺优化

采用扫描电镜(SEM)研究了发蓝、超声波酸洗前处理工艺对大型弹簧零件表面残余氧化皮的去除效果以及这两种前处理工艺对镀锌层的结合力与抗腐蚀性能的影响。结果表明,采用适当的发蓝、超声波酸洗等前处理工艺,能够有效去除零件表面顽固的残余氧化皮,较大幅度地提高镀锌层与金属基体的结合力,并提高镀锌层的抗腐蚀性能。     

Effects of Hybrid Voltages on Oxide Formation on 6061 Al-alloys During Plasma Electrolytic Oxidation

Plasma electrolytic oxidation (PEO) is carried out on 6061 Al-alloys in a weak alkaline electrolyte containing NaOH, Na₂SiO₃ and NaCl. Centered on the correlation of composition and structure, analyses by means of X-ray diffration (XRD), scanning electron microscope (SEM) and energy dispersive spectrometry (EDS) are conducted on the specimens, which have been PEO-treated under hybrid voltages of different direct current (DC) values (140-280 V) with constant alternate current (AC) amplitude (200 V). Attention is paid to the composition, properties and growth mechanism of oxide layers formed with hybrid voltages. Moreover, the main effects of DC value are discussed. Ceramic layers with a double-layer structure which combines hard outer and soft inner layers are found to be consist of α-Al₂O₃, γ-Al₂O₃ and mullite. With the DC values increasing, the growth of the ceramic layers tends to have increasingly obvious three-stage feature.     

IMPROVEMENT OF PHASE GRADIENT AUTOFOCUS ALGORITHM

ＩＭＰＲＯＶＥＭＥＮＴＯＦＰＨＡＳＥＧＲＡＤＩＥＮＴＡＵＴＯＦＯＣＵＳＡＬＧＯＲＩＴＨＭＬｉＬｉｗｅｉ（李立伟），ＭａｏＳｈｉｙｉ（毛士艺），ＡｓｉｆＲａｚａ，ＬｉｕＹｉｎｇ（刘莹）（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ...     

23NiCo钢的氢脆敏感性研究

采用电解充氢和三点慢弯曲试验方法研究了２３ＮｉＣｏ钢的淬火态以及２００℃、４５０℃、４８２℃和６００℃回火处理的试样的氢脆敏感性。结果表明，２３ＮｉＣｏ钢的氢脆抗力与组织中奥氏体的形态、分布有关。４８２℃回火，在马氏体板条边界形成薄膜状的逆转奥氏体，钢的氢脆抗力有大幅度的提高。此时，延长充氢时间（４～１０ｈ）对断裂行为没有影响。     

飞机铆接电阻专用测量仪的研制

飞机铆接电阻专用测量仪是用于测量飞机铆接部件接触质量的专用仪器,它对保证飞机机载电子设备和通讯系统正常工作具有重要作用,在飞机维护中也常常要检测机体电阻是否符合要求.本文介绍了该测量仪的研制目的、工作原理和电路组成.     

Ansys在镀锌锅空间温度场分析中的应用

利用Ansys对镀锌锅上方空间的温度场进行模拟。在模拟过程中，利用Ansys软件中的FlotranCFD模块建立模型，计算锌锅上方空间的流场和温度场分布情况，分析温度的主要影响因素，为热镀锌生产线的工程设计提供了理论依据。此方法也为温度分析提供了一种新的思路。