化学反应过程方式的判据及反应方向的判据

本文对化学反应过程的方式及方向判据问题进行了简要分析,并指出用△G~Q代替△G判断化学反应过程的粗略界限。     

J—8ACT验证机平尾助力系统抖振分析

本文对J-8ACT验证机纵向数字电传操纵系统所使用的平尾助力系统的抖振原因和抑制措施进行了线性和非线性分析。证明了引起助力系统抖振的主要原因,除由流量特性决定的过大的流量系数外,对于内反馈式的助力系统来说,不可避免的安装支承间隙是一个重要因素。机械输入式液压伺服裝置的一些重要特性是由滑阀摩擦引起的。这种受机械反馈影响的特殊摩擦力,具有增加液压作动器的增益和滞后作用。由于这个特点,它能抑制/消除助力系统抖振。     

Superclustering and the large-scale structure of the universe

The spatial distribution of a complete redshift sample of nearby rich clusters of galaxies is studied. Strong superclustering, extending to very large scales (100h⁻¹Mpc), is observed in the cluster distribution. In particular, we determined and discuss below the following studies:I. The spatial correlation function of rich clusters of galaxies.II. The construction of a complete catalog of superclusters and a study of their growth (percolation).III. The finding of large-scale superclusters surrounding the giant galaxy void in Bootes.IV. The finding of a 300 Mpc void of rich clusters of galaxies.All the above studies provide evidence for the existence of large-scale structure in the universe, and reveal some of its characteristics. These findings are of importance to models of the formation of galaxies and structure in the universe.     

Multiscale topology optimization using feature-driven method

This paper presents a multiscale design method for simultaneous topology optimization of both macrostructures and microstructures. Geometric features are extended as design primitives at both macro and micro scales and represented by Level Set Functions (LSFs). Parameters related to the locations, sizes, and orientations of macro and micro features are considered as design variables and optimized simultaneously. In the overlapping areas of different macro features, embedded microstructures are optimally figured out as the solution of the corresponding sub-optimization problem. In this study, the eXtended Finite Element Method (XFEM) is implemented for structural and sensitivity analyses with respect to design variables. This method has the advantage of using a fixed grid independent of the topology optimization process. The homogenization procedure is applied to calculate the effective properties of considered microstructures in each macro feature. Numerical examples are presented to illustrate the effectiveness of the proposed method. Results depict that the multiscale design cannot obviously improve structural stiffness compared with a solid-material design under the linear elastic condition.     

Association of optical tracklets from a geosynchronous belt survey via the direct Bayesian admissible region approach

The direct Bayesian admissible region approach is an a priori state free measurement association and initial orbit determination technique for optical tracks. In this paper, we test a hybrid approach that appends a least squares estimator to the direct Bayesian method on measurements taken at the Zimmerwald Observatory of the Astronomical Institute at the University of Bern. Over half of the association pairs agreed with conventional geometric track correlation and least squares techniques. The remaining pairs cast light on the fundamental limits of conducting tracklet association based solely on dynamical and geometrical information.     

飞机刹车系统防滑功能研究

介绍了某型机防滑刹车系统组成、功能和工作原理,通过某型机机轮、刹车系统不同试验状态性能对比,并与某某飞机机轮、刹车系统进行动力试验数据、防滑性能对比分析,确定防滑刹车系统在通常情况下不工作,是系统的正常工作现象。     

提升民用飞机水废水系统运营经济性技术研究

基于现代民机绿色环保设计理念和对经济性的追求,减重是飞机设计中重点考虑因素,关于降低民用飞机水废水系统运营载重、提高运营经济性研究,国内外尚未发布公开文献。本文基于对航线用水统计数据研究,形成航线运营所需水量计算技术;基于我国航线飞行时长分布特点,提出基于航线实际运营时间和载客人数为需求、为系统设定分档加水设计技术。结果表明：与同类机型数据对比,本文的水量计算技术是有效的;分档加水设计技术能够有效地降低系统在航线运营过程中的运营重量,可以提升民用飞机水废水系统的运营经济性。     

航空发动机低压转子系统的“可容模态”设计及实验验证

建立了带弹性支承和阻尼器的航空发动机低压柔性转子动力学模型,进行了模态计算以及临界转速处的响应计算。在考虑临界转速约束与“临界跟随”现象约束的条件下,综合模态不平衡影响因子、弹支应变能占比以及套齿连接结构稳定性构造了可容度评价函数,建立了低压转子系统的“可容模态”优化设计方法。设计并搭建了低压转子实验系统,从模态测试实验、阻尼器减振实验以及长时间“共振”实验,验证了设计方法的可靠性。研究结果为计算的临界转速与实际测量的临界转速最大误差为3.86%,阻尼器在1阶与2阶临界转速处的减振比最大可达45.6%,实验转子系统在1阶与2阶临界转速处各完成了长达412.5 s和429.8 s的“共振”实验,共振过程中转子系统各通道振动单峰值稳定在100μm以内,且无次谐波产生。表明了所建立的航空发动机低压转子系统“可容模态”优化设计方法是可行的。     

微带线不均匀区的平面格林函数分析程序设计

讨论了微带线不均匀区的平面格式函数分析法,应用精确的计算公式编制程序,并考虑了高次模效应,分析了边缘场效应,引入了动态有效介电常数,提高了计算精度,同时给出了提高计算速度的方法。     

一类非线性系统的变结构控制问题

本文研究了简约型非线性控制系统的变结构控制问题,针对变结构控制切换函数的确定问题进行了深入研究,给出了一类非线性系统切换函数的确定方法。研究结果表明,该方法适用于一类难于或不能可控正则化和线性化的非线性控制系统的综合。最后通过仿真证实了该方法的有效性。