HASDM修正方法分析与评估

分析Jacchia70（J70）热层模式原理、美国空军高精度卫星拖曳模型（HASDM）的修正方法及选取球面调和函数的原因.推导模式密度对球谐系数（SH）的偏导数,给出利用模式密度泰勒展开进行线性化处理、迭代求解球谐系数的具体过程.针对2003年10月29日大磁暴事件,基于CHAMP和GRACE A/B卫星加速度计实测密度,进行修正方法的性能评估.统计相对误差的均值及标准差变化：改进前分别为-81.7%,74.4%;改进后分别为-5.9%,53.1%,验证了改进算法的有效性.从热层上下边界温度角度,详细分析了热层模式动态修正原理,研究结果为类HASDM修正模式的工程应用提供了理论基础.     

管-隔板复合式减涡器流阻特性

为了探索管-隔板复合式减涡器结构对共转盘腔径向内流流阻特性的影响规律,对不同转速、管-隔板复合结构下的去旋系统展开了数值研究,得到了不同工况下径向内流共转盘腔的流场结构、总压损失以及沿程总压损失分布曲线。研究结果表明:相对于基础管式减涡器,管-隔板复合式减涡器可以明显降低盘腔内的总压损失。管式减涡器盘腔上游安装隔板的减阻效果要优于盘腔下游安装隔板的减阻效果,且上游隔板和下游隔板存在最佳无量纲长度为0.118和0.065,与基础模型相比,最佳减阻效果分别提高17%和5%。在最佳隔板长度下,管式减涡器上、下游同时安装隔板的减阻效果最好,相比于基础模型,减阻性能提高19%。     

Negative VTEC with spherical harmonic expansion model under different solar activity conditions

The Earth’s ionosphere can be described by a spherical harmonic (SH) expansion up to a specific degree. However, there exist negative vertical total electron content (VTEC) values in the global ionosphere map (GIM) with the SH expansion model. In this contribution, we specifically investigated the negative VTEC values that are induced by the SH expansion model and validated the performance of the inequality-constrained least squares (ICLS) method in eliminating the negative VTEC values. The GPS data from 2004 to 2017 was selected to cover one solar cycle and the experiments under different solar activity conditions were analyzed. The results in our work show that the occurrence of the negative VTEC values is attributed to the deficiency of the SH expansion model when the VTEC itself is small instead of the unevenly distribution of the GNSS stations. The negative VTEC values appear periodically in the temporal domain, showing apparently one year and half year periods. During one year, two peaks in June and December can be observed in the time series of the negative VTEC values. The number of negative VTEC values in June is obvious larger than that in December. During one solar cycle, the number of negative VTEC values under quiet solar activity condition is obvious larger than that under strong solar activity condition. In the spatial domain, the appearance of the negative VTEC values is strongly related with the movement of the subsolar point. In the latitude of the subsolar point has the largest magnitude, the negative values will appear on the opposite hemisphere and the further from the subsolar point the more negative values. The maximum number of the negative VTEC values in the southern hemisphere appears in June, while the peak value in the northern hemisphere appears in December. The maximum number of negative VTEC values in the southern hemisphere is generally larger than that in the northern hemisphere. In addition, the negative VTEC values are distributed both at middle latitude and high latitude in the southern hemisphere, while they are mainly distributed at high latitude in the northern hemisphere. When the ICLS method is used, the negative VTEC values can be eliminated efficiently and it has nearly no influence on the positive VTEC values. The ICLS method can also improve the receiver’s differential code bias (DCB) and significantly decrease the unreasonable negative slant TEC (STEC) values along the lines of sight. Using the final GIM product of the Jet Propulsion Laboratory (JPLG) as a reference, the root mean square (RMS) of the ICLS solution shows maximum 25%, 20% and 45% improvement relative to the least squares (LS) solution at northern high latitude, southern middle latitude and southern high latitude, respectively.     

导引头伺服机构消隙齿轮系统动力学特性分析

消隙齿轮广泛应用于导引头伺服机构惯性稳定平台传动系统中，用于消除回程误差，提高传动精度。目前，对消隙齿轮传动系统的动力学分析大多采用数值方法，然而在求解含时变啮合刚度和间隙的强非线性系统时耗时较长。本文利用集中质量法建立考虑时变啮合刚度的消隙齿轮系统动力学模型，通过对模型的无量纲及归一化处理，运用分段的增量谐波平衡法对消隙齿轮传动系统进行分析，并利用四阶Runge-Kutta法进行数值验证，研究了不同参数对消隙齿轮系统动力学特性的影响规律。结果表明:随扭簧刚度的提高，系统谐振频率也提高，且共振幅值降低;随内部激励的增加、阻尼比的减小，系统由周期运动逐渐变为混沌运动，且共振幅值增大。     

L波段高效小尺寸功率放大器载片设计

为了应对当前市场对功率器件更低成本、更小尺寸和更优性能的要求，设计了一款工作频率为1.2～1.4GHz的高效率小尺寸氮化镓（gallium nitride,GaN）基功率放大器载片。使用有源时域负载牵引系统对GaN管芯进行在片测试并提取管芯的非线性行为模型，在先进设计系统（advanced design system,ADS）软件中利用模型进行阻抗匹配电路设计和仿真，将功率放大器端口匹配到了目标阻抗50Ω。该载片采用谐波控制技术使功率放大器附加效率提高了6%～8%，采用高介电常数的陶瓷材料将载片电路集成在8mm×8mm。实测结果显示，放大器在漏源电压28V、100us脉宽和10%占空比脉冲输入的工作条件下，在小尺寸的载体上实现了输出功率大于56W，功率附加效率大于78%的高效率指标。