FLOLS误差源建模与仿真研究

菲涅尔光学助降系统(FLOLS)是典型的舰载机光学着舰引导系统。分析了影响FLOLS着舰引导精度的指示误差源和光学误差源,包括稳定平台跟踪误差、光源位置与理想着舰点位置偏差、光源温度、飞行员视觉误差,研究了FLOLS相关系统的工作原理和着舰引导误差的产生机理,建立了各误差源的数学模型。通过对FLOLS着舰过程进行重复仿真,使用标准偏差统计方法,得到各着舰引导误差的统计特性,进而得出各误差源影响着舰精度程度比较。     

Orbit insertion error analysis for a space-based gravitational wave observatory

Constellation is required to be highly stable over several years for a space-based gravitational wave observatory. However, the stability of the constellation can be affected by orbit insertion errors. The effects of orbit insertion errors on the constellation are mainly studied in this paper. Firstly, Monte-Carlo, Unscented Transformation Covariance Analysis Method (UTCAM) and Spherical Simplex Unscented Transformation Covariance Analysis Method (SSUTCAM) are used for simulation. The results indicate that UTCAM and SSUTCAM are highly efficient in calculating, with a relative error of less than 6%. Therefore, it is concluded that because of their accuracy and high efficiency, UTCAM and SSUTCAM can be adequately used in orbit insertion error analysis for a space-based gravitational wave observatory. Secondly, SSUTCAM is used to study the effects of position and velocity errors on the constellation. For the case in this paper, when the position error does not exceed 300 km, and the velocity error does not exceed 4 cm/s, the constellation remains stable.     

基于距离相关分析的航空维修差错影响因素分析

针对一般航空维修差错因素分析中只将相关因素各自独立分析,并将其影响程度进行排序分析方法的局限性,对航空维修差错因素的分类和综合分析,建立基于距离相关分析的航空维修差错影响因素综合分析模型,并通过实例数据分析计算得出航空维修差错相关系数,该相关系数可应用于航空维修差错影响因素的综合关联分析,将航空维修差错因素间的相关性以相关系数定量表示,弥补了传统方法单一性的缺陷.     

Study of seasonal and long-term vertical deformation in Nepal based on GPS and GRACE observations

Lithospheric deformation signal can be detected by combining data from continuous global positioning system (CGPS) and satellite observations from the Gravity Recovery and Climate Experiment (GRACE). In this paper, we use 2.5- to 19-year-long time series from 35 CGPS stations to estimate vertical deformation rates in Nepal, which is located in the southern side of the Himalaya. GPS results were compared with GRACE observations. Principal component analysis was conducted to decompose the time series into three-dimensional principal components (PCs) and spatial eigenvectors. The top three high-order PCs were calculated to correct common mode errors. Both GPS and GRACE observations showed significant seasonal variations. The observed seasonal GPS vertical variations are in good agreement with those from the GRACE-derived results, particularly for changes in surface pressure, non-tidal oceanic mass loading, and hydrologic loading. The GPS-observed rates of vertical deformation obtained for the region suggest both tectonic impact and mass decrease. The rates of vertical crustal deformation were estimated by removing the GRACE-derived hydrological vertical rates from the GPS measurements. Most of the sites located in the southern part of the Main Himalayan Thrust subsided, whereas the northern part mostly showed an uplift. These results may contribute to the understanding of secular vertical crustal deformation in Nepal.     

Singularity radius gradient-based rapid singularity-escape steering law for SGCMGs

In order to visualize singularity of SGCMGs in gimbal angle space, a novel continuous bounded singularity parameter--Singularity Radius, whose sign can distinctly determine singularity type, is proposed. Then a rapid singularity-escape steering law is proposed basing on gradient of Singularity Radius and residual base vector to drive the SGCMG system to neighboring singular boundary, and quickly escape elliptic singularities. Finally, simulation results on Pyramid-type and skew-type configuration demonstrate the effectiveness and rapidness of the proposed steering law.     

Optimal guidance of extended trajectory shaping

To control missile＇s miss distance as well as terminal impact angle, by involving the timeto-go-nth power in the cost function, an extended optimal guidance law against a constant maneuvering target or a stationary target is proposed using the linear quadratic optimal control theory.An extended trajectory shaping guidance（ETSG） law is then proposed under the assumption that the missile-target relative velocity is constant and the line of sight angle is small. For a lag-free ETSG system, closed-form solutions for the missile＇s acceleration command are derived by the method of Schwartz inequality and linear simulations are performed to verify the closed-form results. Normalized adjoint systems for miss distance and terminal impact angle error are presented independently for stationary targets and constant maneuvering targets, respectively. Detailed discussions about the terminal misses and impact angle errors induced by terminal impact angle constraint, initial heading error, seeker zero position errors and target maneuvering, are performed.     

叶片型面测量的数据分析及误差评定方法

通过对三坐标测量机测量精铸叶片的种类、原理和方法进行分析,重点探讨了三坐标测量机测量扭曲叶片产生误差的原因及误差修正方法,并应用实例进行了较为详尽的论述和验证,给出了扭曲叶片检测误差修正的实现算法和评价方法。     

发射惯性坐标系下误差角与数学平台失准角的推导与仿真

基于状态空间法的捷联惯性/天文组合导航系统(SINS/CNS)需要数学平台失准角作为观测值参与滤波估计,工程实际只能得到SINS、CNS二者的姿态误差角.以弹道导弹为背景,在发射惯性坐标系下分别推导了四元数和欧拉角形式的姿态误差角与数学平台失准角之间的相互转换矩阵.建立了弹道导弹SINS/CNS数学模型,并采用EKF和UKF算法验证了该转换矩阵.仿真结果表明误差转换矩阵的正确性.     

基于解析法的用户差分距离误差解算方法(英文)

为了进一步增强星基导航系统的完好性性能,提出了一种基于解析法的用户差分距离误差计算方法。文中首先介绍了卫星时钟和星历改正数的计算方法,认为计算用户差分距离误差的关键是查找卫星服务区域内的最差用户位置。通过变换卫星时钟和星历误差协方差矩阵,将查找最差用户位置变换成一个解析几何问题,通过数学推导得出最差用户位置的解析式,进而求解用户差分距离误差。通过计算机仿真对比了解析法和遍历法之间的性能差异,结果表明:解析法的正确性由遍历法得到了验证,解析法可以减少90%的运行时间并且具有更低的计算复杂度,便于工程实现。     

采用框架角受限控制力矩陀螺的航天器姿态机动控制

以框架角受限的金字塔构型控制力矩陀螺(CMG)为执行机构,研究了航天器欧拉姿态机动控制问题.考虑控制力矩及航天器角速度约束等因素,对已有的姿态机动控制律进行了改进,使其能实现绕欧拉轴的大角度姿态机动.同时考虑力矩陀螺框架角受限情况,通过适当加入空转指令对框架角进行重构,设计了复合控制形式的控制力矩陀螺操纵律,并通过过渡...