混合遗传算法在气动弹性多学科优化中的应用

利用遗传/敏度混合优化算法对复合材料前掠翼飞机进行气动弹性剪裁设计研究.在满足强度、位移、升力效率、副翼效率、发散速度和颤振速度等约束条件的前提下,以机翼复合材料蒙皮铺层的厚度为设计变量,对蒙皮进行重量最小化设计.研究表明,在飞机结构初步设计阶段单纯使用基于敏度的优化算法,很难满足设计上的要求;使用遗传/敏度混合优化算法可以取得较好的结果,该方法适用于飞机结构初步设计.还研究了偏轴角对优化重量的影响.分析结果显示,对于文中所研究的这类蒙皮使用由0°、90°和±45°纤维组成的铺层的复合材料前掠翼飞机,在满足多个约束条件的前提下,其优化重量对于偏轴角的变化相对不敏感.      

多目标优化方法库的开发与应用

多目标优化方法库是一个专门针对多目标问题的优化软件。本文介绍了用面向对象方法对方法库进行开发的过程,着重说明了该软件以优化模型为中心的主体框架和以优化算法为核心的模块化结构,以及库中采用的各种多目标优化算法特别是非劣分层遗传算法。最后通过算例说明了方法库的使用方法,证明了其良好的操作性和库中算法优良的性能。     

Hybrid partition- and network-level scheduling design for distributed integrated modular avionics systems

Distributed Integrated Modular Avionics (DIMA) develops from Integrated Modular Avionics (IMA) and realizes distributed integration of multiple sub-function areas. Time-triggered network provides effective support for time synchronization and information coordination in DIMA systems. However, inconsistency between processing resources and communication network destroys the time determinism benefiting from partitions and time-triggered mechanism. To ensure such time determinism and achieve guaranteed real-time performance, system design should collectively provide a global communication scheme for messages in network domain and a corresponding execution scheme for partitions in processing domain. This paper firstly establishes a general DIMA model which coordinates partitioned processing and time-triggered communication, and then proposes a hybrid scheduling algorithm using Mixed Integer Programming to produce feasible system schemes. Furthermore, incrementally integrating new functions causes upgrades or reconfigurations of DIMA systems and will generate integration cost. To control such cost, this paper further develops an optimization algorithm based on Maximum Satisfiability Problem and guarantees that the scheduling design for upgraded DIMA systems inherit their original schemes as much as possible. Finally, two typical cases, including a simple fully connected DIMA system case and an industrial DIMA system case, are constructed to illustrate our DIMA model and validate the effectiveness of our hybrid scheduling algorithms.     

具有时间约束的无人机遗传算法航迹规划

为无人机进行航迹规划不仅要满足路径的有效性,还需要考虑无人机的到达时间约束.将遗传算法应用于动态环境中无人机的航迹规划,通过编码生成初始航迹,确定合理的适应度函数和进化操作,同时根据要求到达时间约束为每个航迹加入过点速度和到达时间信息,最终搜索规划出可飞且满足时间约束的航迹.在仿真实验中实现了针对移动目标的规划和突然出现威胁的局部重规划.     

低HSI噪声旋翼桨尖外形优化设计方法

建立了一套基于计算流体力学(CFD)/FW-H_pds方程(Ffowcs Williams-Hawkings equations with penetrable data surface)的气动噪声预估技术和组合优化算法的低噪声旋翼桨尖平面外形设计方法。首先,采用积分形式的可压雷诺平均Navier-Stokes(RANS)方程作为旋翼流场求解控制方程,围绕旋翼流场的网格采用嵌套网格方法生成。在优化过程中,桨叶网格生成采用提出的高效参数化的网格自动生成方法。在建立的CFD方法求解基础上,采用基于可穿透旋转积分面的鲁棒性较好的FW-H_pds方程来求解旋翼高速脉冲(HSI)噪声。然后,以降低旋翼HSI噪声为目标,以旋翼悬停气动性能为约束,提出具备前掠-后掠-尖削等组合特征的桨尖外形方案并进行优化分析。将基于拉丁超立方(LHS)方法和径向基函数(RBF)的代理模型方法耦合到遗传算法过程中,建立了一种高效的组合优化算法。在当前的计算状态下,优化后的桨尖外形的负压峰值相比于矩形桨叶降低了58.4%,优化后的桨叶有效地减弱了旋翼桨尖区域的跨声速"离域化"现象,因此可以降低旋翼HSI噪声特性,同时可以减弱旋翼桨尖涡强度达30%,旋翼悬停性能提高了2%~3%。     

基于遗传算法与评估模型的飞行载荷实测研究

为了得到飞行载荷实测所需的最优载荷方程,建立了可表征载荷方程数学意义和物理意义的评估模型,与遗传算法(GA)结合,以载荷方程评估驱动载荷方程建立,形成一种新的载荷方程建立方法——EMGA。通过建立某机翼根部剪力方程,比较了穷尽搜索(ES)法、传统GA和EMGA所建载荷方程的评估模型参数。最后将3种方法建立的方程用于飞行载荷实测。结果发现:和其他两种方法比较,本文提出的EMGA可得到最优的载荷方程;EMGA测得的飞行载荷分散性小,最优载荷方程的测量结果可作为最终的飞行载荷。     

复合材料参数化桨叶的动力学减振优化设计

为了进行桨叶动力学优化设计,建立面向工程设计的复合材料多闭室C型梁桨叶剖面参数化模型,实现了桨叶剖面气动外形、内部结构组件、复合材料铺层设计的参数化,并提出了一种保持C型梁纤维面积恒定的参数化设计方法.采用全局寻优能力较强的多种群遗传算法(MPGA),集成参数化设计模型与旋翼有限元气动弹性综合分析模型,通过桨叶各剖面结构组件的参数优化实现了旋翼动力学减振.算例给出了"海豚"直升机桨叶剖面特性实测值与参数化桨叶模型计算值的对比,整体误差不超过3%,并用该参数化模型对桨叶进行动力学减振优化,实现了旋翼加权优化振动载荷系数减小4.15%,经过优化后桨叶的配重位置更加分散,有利于缓解桨叶内部应力/应变突变;而且部分配重分配到桨尖,提高了旋翼的自转惯量,增加了旋翼自转下滑的安全性.     

Intelligent modeling and identification of aircraft nonlinear flight

In this paper, a new approach has been proposed to identify and model the dynamics of a highly maneuverable fighter aircraft through artificial neural networks（ANNs）. In general, aircraft flight dynamics is considered as a nonlinear and coupled system whose modeling through ANNs, unlike classical approaches, does not require any aerodynamic or propulsion information and a few flight test data seem sufficient. In this study, for identification and modeling of the aircraft dynamics, two known structures of internal and external recurrent neural networks（RNNs） and a proposed structure called hybrid combined recurrent neural network have been used and compared.In order to improve the training process, an appropriate evolutionary method has been applied to simultaneously train and optimize the parameters of ANNs. In this research, it has been shown that six ANNs each with three inputs and one output, trained by flight test data, can model the dynamic behavior of the highly maneuverable aircraft with acceptable accuracy and without any priori knowledge about the system.     

基于遗传算法多段翼型外形优化设计

为提高多段翼型增升效能,开展襟翼外形和缝道参数同时优化设计研究。优化算法采用遗传算法,以求解RANS方程为气动特性分析方法,通过椭圆方程控制生成多段翼型外形,同时优化缝宽、搭接量、襟翼偏角等位置参数和襟翼外形控制参数,实现多段翼型优化设计。设计实践表明,与只优化位置参数相比,同时优化襟翼外形和位置参数得到的多段翼型有更大的升力系数,方法是可行的,具有一定的工程应用前景。     

Double-stage Metamodel and Its Application in Aerodynamic Design Optimization

Constructing metamodel with global high-fidelity in design space is significant in engineering design. In this paper, a double-stage metamodel (DSM) which integrates advantages of both interpolation metamodel and regression metamodel is constructed. It takes regression model as the first stage to fit overall distribution of the original model, and then interpolation model of regression model approximation error is used as the second stage to improve accuracy. Under the same conditions and with the same samples, DSM expresses higher fidelity and represents physical characteristics of original model better. Besides, in order to validate DSM characteristics, three examples including Ackley function, airfoil aerodynamic analysis and wing aerody-namic analysis are investigated. In the end, airfoil and wing aerodynamic design optimizations using genetic algorithm are presented to verify the engineering applicability of DSM.