一种低迟滞低磨损的指尖密封型线构形的研究

针对迄今指尖密封多目标性能优化研究中存在的难以实现迟滞性能和磨损性能同步改善的问题,通过引入Stackelberg对策理论,并将指尖密封型线构形作为优化"元素",构建了指尖密封迟滞性能和磨损性能优化的Stackelberg模型.在正向Stackelberg主从对策机制下,采用基于有限元仿真和BP神经网络的遗传算法在Stackelberg系统主从层面上实现了指尖密封性能的可控优化,获得了具有低迟滞低磨损性能的"上凹"构形指尖密封型线.有限元仿真分析合理地解释了"上凹"型线指尖密封具有较好性能的原因,表明"上凹"型线指尖密封具有良好的应用前景.      

基于优化算法的压气机叶片气动设计

将数值最优化方法与叶轮机械正问题流场计算相结合,实现对风扇/压气机叶片积叠线、子午面流道和沿径向弦长分布组合的优化设计,数值最优化采用基于局域网的并行遗传算法.运用该软件对NASArotor67风扇转子进行重新设计,设计目标为设计点压比和流量不变、效率最高以及堵点流量不变.与原风扇转子比较,稳定工作流量范围略增大并且在整个工作流量范围内优化转子压比近于不变、效率提高约0.5个百分点.      

Unequal-thickness billet optimization in transitional region during isothermal local loading forming of Ti-alloy rib-web component using response surface method

Avoiding the folding defect and improving the die filling capability in the transitional region are desired in isothermal local loading forming of a large-scale Ti-alloy rib-web component (LTRC). To achieve a high-precision LTRC, the folding evolution and die filling process in the transitional region were investigated by 3D finite element simulation and experiment using an equal-thickness billet (ETB). It is found that the initial volume distribution in the second-loading region can greatly affect the amount of material transferred into the first-loading region during the second-loading step, and thus lead to the folding defect. Besides, an improper initial volume distribution results in non-concurrent die filling in the cavities of ribs after the second-loading step, and then causes die underfilling. To this end, an unequal-thickness billet (UTB) was employed with the initial volume distribution optimized by the response surface method (RSM). For a certain eigenstructure, the critical value of the percentage of transferred material determined by the ETB was taken as a constraint condition for avoiding the folding defect in the UTB optimization process, and the die underfilling rate was considered as the optimization objective. Then, based on the RSM models of the percentage of transferred material and the die underfilling rate, non-folding parameter combinations and optimum die filling were achieved. Lastly, an optimized UTB was obtained and verified by the simulation and experiment.     

轮廓度约束下近净成形叶片余量优化方法

针对近净成形的叶片在自适应精加工中余量不均这一问题,提出了考虑叶型截面线轮廓度公差约束的余量优化方法。在设计基准与加工基准配准的条件下,改变工件做刚性位移的余量优化思路,建立一种新的叶身优化模型,避免优化后叶片检测处的截面线超出轮廓度公差,提升叶片余量优化阶段寻找到目标加工曲面的能力。最后以某压气机叶片为例进行验证,此方法不仅能够保证叶身加工余量,还能同时满足型面检测处的轮廓度公差,为近净成形的叶片在自适应加工中提供一种新的余量优化方法。     

GEO星弹双基SAR多普勒分辨率特性分析

通过对地球同步轨道（GEO）卫星运动特点的分析，阐明其对多普勒分辨率的影响。传统的双基合成孔径雷达（SAR）多普勒分辨率表达式由于不考虑雷达平台加速度矢量带来的影响，并不适用于GEO星弹双基SAR系统。根据收发平台的双曲线轨迹对目标的回波多普勒特性影响，首先利用梯度方法推导了GEO星弹双基SAR系统的多普勒分辨率表达式；随后详细地分析了GEO卫星与导弹的空间几何关系及多普勒参数，特别是加速度矢量对多普勒分辨率的影响。仿真结果验证了所推导多普勒分辨率表达式的有效性，其有助于双基SAR理论系统完整性的提高，为后续系统设计及应用实践提供理论支撑。     

Space debris observations with the Slovak AGO70 telescope: Astrometry and light curves

The Faculty of Mathematics, Physics and Informatics of Comenius University in Bratislava, Slovakia (FMPI) operates its own 0.7-m Newtonian telescope (AGO70) dedicated to the space surveillance tracking and research, with an emphasis on space debris. The observation planning focuses on objects on geosynchronous (GEO), eccentric (GTO and Molniya) and global navigation satellite system (GNSS) orbits. To verify the system’s capabilities, we conducted an observation campaign in 2017, 2018 and 2019 focused on astrometric and photometric measurements. In last two years we have built up a light curve catalogue of space debris which is now freely available for the scientific community. We report periodic signals extracted from more than 285 light curves of 226 individual objects. We constructed phase diagrams for 153 light curves for which we obtained apparent amplitudes.     

Optimal trajectory planning of free-floating space manipulator using differential evolution algorithm

The existence of the path dependent dynamic singularities limits the volume of available workspace of free-floating space robot and induces enormous joint velocities when such singularities are met. In order to overcome this demerit, this paper presents an optimal joint trajectory planning method using forward kinematics equations of free-floating space robot, while joint motion laws are delineated with application of the concept of reaction null-space. Bézier curve, in conjunction with the null-space column vectors, are applied to describe the joint trajectories. Considering the forward kinematics equations of the free-floating space robot, the trajectory planning issue is consequently transferred to an optimization issue while the control points to construct the Bézier curve are the design variables. A constrained differential evolution (DE) scheme with premature handling strategy is implemented to find the optimal solution of the design variables while specific objectives and imposed constraints are satisfied. Differ from traditional methods, we synthesize null-space and specialized curve to provide a novel viewpoint for trajectory planning of free-floating space robot. Simulation results are presented for trajectory planning of 7 degree-of-freedom (DOF) kinematically redundant manipulator mounted on a free-floating spacecraft and demonstrate the feasibility and effectiveness of the proposed method.     

拟合任意空间曲面的B3样条方法及其实现

在计算机辅助几何设计中,曲线,曲面拟合多彩多项式作为基函数,本文通过几种曲线,曲面生成算法分析,提出了一种Ｂ３样条的拟合方法。它具有Ｂ样条的主要优点,且通过所有型值点,这一方法适用于自由曲线,曲面的设计。本文还结合拱坝体形设计实例说明了用此方法进行造型设计的方法。     

三角翼大攻角绕流数值模拟研究

采用Harten-Yee的二阶精度隐式TVD格式对N-S方程进行数值模拟,研究了后掠角为65°和70°的三角翼绕流的流场特性。计算结果表明：TVD格式中限制器函数的选取对于三角翼绕流结构的计算结果具有较重要的影响。结合张涵信的旋涡定性分析理论对旋涡的发展过程进行研究,此外,还对二次涡破裂现象和网格分布影响等问题进行了探讨。     

组网卫星电推进自主轨道保持方法

以某对地观测星座任务为背景,对基于电推进的组网卫星自主轨道保持控制方法进行研究.由地面进行标称轨道递推并定期上注,星上考虑地球非球形J2项摄动进行本星和标称星拟平均轨道参数递推,采用单边极限环方法进行面内相位保持控制.针对长期运行在对日定向模式的倾斜轨道且固定太阳翼卫星,考虑能源、程控任务、轨道偏心率等约束,设计了卫星...