Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

波音747-400F货机侧货舱门操作系统故障分析与维护

波音747-400F侧货舱门操作系统的故障关系到飞机能否正常装卸货物,对减少过站时间、避免延误、提高航空公司运力都有一定影响。本文从该系统的功能特点和故障数据统计出发,对飞机侧货舱门操作系统的常见故障进行全面分析,并根据分析结果提出相应的航线和工程维护措施。     

Feasibility evaluation of failure models for predicting forming limit of metal foils

Forming limit of metal foil is an important index to evaluate its formability, and is of considerable significance to improve the quality of products. The ductile fracture (DF) behavior in microscale plastic deformation is remarkably affected by the geometry and grain size. To explore the size-dependent forming limit curve (FLC), the Holmberg and Marciniak tests of SUS304 foils with the thicknesses of less than 0.1 mm and diverse grain sizes were performed. In addition, the validity and feasibility of three types of existing failure models including Swift/Hill, Marciniak-Kuczynski (M-K) and DF criteria for predicting the micro-scaled FLCs were discussed. It is found that the Swift/Hill model possesses the worst accuracy with predicting deviation above 50%. Four classical DF criteria including Freudenthal, Ayada, Brozzo and Oh show great difference, and Oh model considering plastic anisotropy presents the best precision. The predicted deviation of M-K model is aggravated with increasing grain size and decreasing foil thickness, which is attributed to the intensified free surface roughening and transformation of fracture mechanism with miniaturization. This research thus provides a deeper understanding and valuable reference for the widespread application of FLC in microforming.     

求解具有多层试验数据成败型单元混联系统可靠性近似限的信息论方法

研究了求解具有多层成败型试验数据时,系统可靠性置信下限近似解的信息论方法,给出了各层试验数据综合的方法和步骤,推导了各层数据信息论方法折合及综合的计算公式。根据单元试验信息提供的信息量与系统折合试验应提供的信息量相等的原则,将多层试验数据逐级折合为系统的等效成败型数据,导出了等效成败型数据信息论方法折合的基本公式;结合可靠性工程的基本原理,根据单个成败型单元可靠性评定的经典精确置信限方法,给出了系统可靠性置信下限的近似解。并以实例形式说明了该方法的具体应用。     

颤振板的极限环振动

本文研究了在匀速气流中悬臂板的极限环振动。采用冯·卡门大挠度板理论和准定常空气动力,应用瑞雷-里兹法导出悬臂颤振板的非线性振动的计算方程。并提出一组模态函数展开式用于拉格朗日方程,从而确定随时间历程的极限环振动和颤振边界。计算表明,模态展开式具有收敛性,板的长宽比对极限环振幅有显著影响。     

300M钢制内螺纹冷挤压研究

研究300M超高强度钢内螺纹的冷挤压成形以及工件预制底孔直径、冷却润滑液等因素对其内螺纹挤压成形的影响;对挤压螺纹轴截面上的显微硬度进行了测试,并对显微硬度的特征进行了详细分析,与45钢进行对比以此来表征挤压强化效果。     

有理Bézier曲线的权因子计算

给出了有理Bézier曲线形状作定量修改时的权因子的计算公式,并且证明了权因子选取的唯一性。     

参数曲线形状修改

提出一种新的、基于余弦伸缩函数、针对参数曲线的形状修改与变形方法。首先定义了特殊的伸缩函数 ,在此基础上构造了形状算子矩阵 ,其次将该矩阵与伸缩中心及主方向结合构造出两种变形矩阵 ,最后用变形矩阵去乘待变形曲线在局部坐标系下的位置向量 ,或用它乘以给定向量场再加待变形曲线在原坐标系下的位置向量从而产生变形效果。伸缩函数含有若干可变参数 ,每个参数可产生不同的形状修改效果 ,比如控制被修改部分与未修改部分间的连续阶 ,容易得到理想的变形效果。理论分析实例表明该方法在几何造型 ,计算机图形学等领域有潜在适用性。     

金属橡胶材料静态特性的研究

金属橡胶材料是一种新型阻尼材料,且影响其特性的参数有很多。本文从其本构关系出发,通过改变不同的影响参数,针对不同形状、不同几何尺寸的构件,进行了理论分析和试验研究,总结出了影响其特性的参数及其变化规律,为进一步地设计和更好地应用金属橡胶构件提供有意义的依据。      

基于正交试验的超声波喷丸成形工艺参数分析及弧高值预测

针对带筋板的超声波喷丸成形,采用正交试验法研究了撞针速度、撞针直径、成形轨迹间距、喷丸区域宽度对带筋板超声波喷丸成形弧高值的影响,得出最佳参数组合方案,并以此作为样本数据,建立多元回归分析数学模型。通过实验验证模型的准确性,试验数据和回归分析数据相符较好,可以用回归分析的数学模型来预测喷丸弧高值,提高工艺设计效率。