主从式编队航天器连通性保持与碰撞规避

针对主从式航天器编队过程中存在的通信距离约束、航天器之间的碰撞以及空间干扰等问题,提出一种基于非线性干扰观测器和人工势函数的分布性协同控制方法。当初始通信网络连通时,通过在分布式协同控制器中引入吸引势函数,保证整个编队过程中通信网络始终是连通的。针对主航天器速度仅有部分从航天器直接可知的情况,为每一个从航天器设计分布式的速度观测器估计主航天器的速度,从而实现航天器之间的速度协同。此外,通过在控制器中引入非线性干扰观测器对外界干扰进行观测,显著增强了航天器编队的精度。仿真结果表明,本文提出的分布式协同控制方法不但能够实现对主航天器的速度跟踪以及航天器之间的队形保持,而且能够在编队过程中实现通信网络的连通性保持和航天器之间的碰撞规避。     

无人机编队飞行技术的研究现状与展望

无人机编队飞行是无人机及其应用技术发展研究的新热点.在分析无人机编队飞行特点的基础上,阐述了无人机编队飞行原理与方法的研究现状,并展望了其今后的主要应用前景.     

相对测量在编队卫星自主定轨中的应用

针对编队卫星自主定轨问题进行了研究,设计了一种完全不依赖于地面站和GPS系统的自主导航方案。利用星间测量信息进行卫星编队相对轨道状态的自主确定;并在利用磁强计进行卫星绝对轨道自主确定的基础上,引入星间测量信息提高绝对定轨精度;设计扩展卡尔曼滤波器进行卫星编队轨道状态估计,数学仿真结果验证了这种导航方案和算法的有效性。     

Stability and shape analysis of relative equilibrium for three-spacecraft electromagnetic formation

The invariant shapes for close formation flying with inter-craft electromagnetic force ensure several potential space applications. However, the 6-DOF relative equilibrium problem has not been systematically investigated. This paper mainly analyzes the invariant shapes of relative equilibrium for the three-spacecraft electromagnetic formation, and studies the families of invariant shape solutions with real and constant magnetic moments as well as their linear stability. The problem is examined based on the full nonlinear coupled dynamic models for collinear and general triangular configurations. The relative equilibrium conditions are analyzed to determine whether an invariant shape do exist, and the corresponding families of invariant shape solutions are identified for static and spinning configurations respectively. Finally, the linear stability of such invariant shapes is numerically discussed, which have shown that most invariant shapes are unstable and controllable.     

编队卫星防碰撞规避路径规划方法与控制研究

针对编队卫星在构型重构和构型失效重组时发生碰撞可能性最大的两种机动工况,采用数学规划的方法对其进行防碰撞规避准则、规避策略和控制方面的研究;并通过系统可控性证明出无径向推力相对于全向推力,也可以达到目标相位点只是燃料消耗得多。对编队构型失效重组工况中备份星机动前停泊位置,进入编队位置选择和启动时刻选择以及故障星离开编队后,目标轨道确定等问题通过数学仿真的形式予以解答。仿真结果表明,该研究方法真实可信、简便有效。     

基于比例阀控制的液压附件部件综合试验台的设计

针对某飞机液压系统对液压附件、部件的测试要求,设计了多支路液压系统综合试验台,实现了对飞机液压系统中作动器的动作时间、次数和速度等参数测试,对液压缸、阀、集成块等附件在不同压力、流量和温度等条件下的性能测试。该设计主要采用比例阀控制压力和流量,多级过滤器进行油源净化,PLC和继电器实现测控、电位计进行压力和流量调节,数显表直接显示压力、流量和温度、时间等参数。通过实际测试验证,试验台工作稳定、安全可靠、调整方便、显示直观、振动噪音小、不泄露,满足了某型号飞机液压附件部件测试的要求。     

Periodic event-triggered formation control for multi-UAV systems with collision avoidance

In this paper, periodic event-triggered formation control problems with collision avoidance are studied for leader–follower multiple Unmanned Aerial Vehicles (UAVs). Firstly, based on the Artificial Potential Field (APF) method, a novel sliding manifold is proposed for controller design, which can solve the problem of collision avoidance. Then, the event-triggered strategy is applied to the distributed formation control of multi-UAV systems, where the evaluation of the event condition is continuous. In addition, the exclusion of Zeno behavior can be guaranteed by the inter-event time between two successive trigger events have a positive lower bound. Next, a periodic event-triggered mechanism is developed for formation control based on the continuous event-triggered mechanism. The periodic trigger mechanism does not need additional hardware circuits and sophisticated sensors, which can reduce the control cost. The stability of the control system is proved by the Lyapunov function method. Finally, some numerical simulations are presented to illustrate the effectiveness of the proposed control protocol.     

ISO Observations of Pre-Stellar Cores and Young Stellar Objects

We summarize the observations of the Infrared Space Observatory (ISO) concerning the earliest stages of the stellar formation. The observations of samples of sources in different evolutionary stages are reviewed, addressing in particular how the physical and chemical properties of the protostellar environments change from the pre-stellar cores to the protostars at the end of their accretion phase. In addition, the mid-IR surveys in nearby star-forming regions are discussed, showing their implications for the understanding of the stellar initial mass function. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

Effect of W addition on phase transformation and microstructure of powder metallurgic Ti-22Al-25Nb alloys during quenching and furnace cooling

Powder metallurgic Ti2 AlNb alloys with W addition are sintered at 900, 1000, 1070 °C,and 1150 °C(i.e., in the O + B2, a_2+ B2 + O, a_2+ B2, and single B2 phase regions, respectively)for 12 h, followed by water quenching and furnace cooling. Comparisons of phase and microstructure between quenched and furnace-cooled W-modified alloys are carried out to illustrate the phase transformation and microstructure evolution during the cooling process. Furthermore, a comparison is also made between W-modified and W-free alloys, to reveal the function of the W alloying.W addition accelerates the solutions of a_2 and O phases during the high-temperature holding, and a Widmannsta¨tten B2 + O structure, which contributes to the properties, is induced by furnace cooling from all the phase regions. The Widmannsta¨tten structure includes a B2 matrix, primary O, and secondary O precipitates. However, W alloying refines the Widmannsta¨tten structure only when the alloys are solution-treated and then cooled from the single B2 phase. Although the hardness of the W-modified alloys is lower than that of the W-free alloys sintered in the same phase region, an enhancement of hardness, 489 ± 18 HV, is obtained in the alloy solution-treated in the single B2 phase region for only 0.5 h.     

任务计划地面站编队数据加载方法研究

随着航空电子系统不断发展,任务计划地面站作为航电系统的一个场站保障设备,为飞行前数据的组织、任务数据加载、飞行后记录数据的管理传输和视频/音频的回放提供了一种快速、准确、规范和安全的技术手段。为适应航空电子系统多机编队任务参数地面加载需求,确保多个任务计划中加载数据的准确性,降低用户对编队内几架甚至十几架飞机制作任务参数的难度,本文提出了合理有效的编队数据加载方案,给用户的使用带来了极大的方便。