金属多层膜超晶格结构研究

用高分辨的三晶体x—射线衍射仪测量了Zr、Cu金属交替的多层膜的x—射线小角反射谱。用扩展了的Born—wolf光学模型对Zr、Cu多层膜的x—射线小角反射数据进行了定量分析。结果表明，该金属多层膜在其生长方向具有超晶格结构。在两层金属膜之间的界面上，由于内扩散，形成了界面交混层，它使x—射线小角反射所产生的高阶Bragg峰的强度减弱。由于两种金属膜的晶格不匹配，使高阶Bragg峰加宽。界面的粗糙度可用来模拟x—射线小角反射曲线的阻尼振荡效应。     

缩短工时创造就业岗位的现实选择

缩短工时能够创造就业机会，提供有效的就业岗位。本文分析比较了国内外就业理论和创造就业实际操作过程的政策选择，认为：应该抓紧对实行35小时／周工作制的研究，并尽快出台相关法案。     

NUMERICAL SIMULATION ON MULTI-FLUID INTERFACES

INTRODUCTIONThe study on phenomenon of multi- fluid in-terface driven by shock waves include:( 1 ) totrack the motion of multimaterial interfaces;( 2 )to simulate the chemical reaction on the inter-faces. As the pioneering work,chemical reactionis neglected in this paper. The objective is totrack the interfaces. Of course,the fluids aretreated as compressible medium under such ahigh impact.Although Eulerian schemes workwell for most gas flows,they have been shownto be too dissipative nea…     

飞错高度原因及其防范措施

针对飞错高度这一导致空中危险接近、空中相撞、可控飞行撞地等一系列事故或事故征候的主要根源，通过对具体实例和数据进行分析，找出飞错高度的原因，归纳飞错高度类型，并提出一系列避免措施，以期减少或消除因高度错误而造成的飞行事故征候或飞行事故率。从根本上提高飞行安全性。     

情报网络对生产／流通过程中的库存的影响

本文通过建立独立型、垂直型和综合型3种模型,从订货方式和服务水平两个侧面,分析、考察了在生产/流通系统中建立情报网络而对系统中的库存所产生的影响。并据此提出了“失连库存”的新概念,对其进行了定量的分析和评价。本文得到的结论不仅在多阶层库存理论的研究上是必不可少的,而且对我国发展管理信息系统等现代化管理技术都具有指导意义。     

小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

Numerical investigation of flow mechanisms of tandem impeller inside a centrifugal compressor

This study numerically investigated a single stage centrifugal compressor ‘‘Radiver’’ with a wedge diffuser and several tandem-designed impellers to explore the flow phenomena within the tandem impeller and the potential to enhance compressor performance. The results demonstrate that tandem design and clocking fraction (λ_s) significantly affects the compressor performance. The compressor stage with tandem impellers of Series A of boundary layer growth interruption alone are observed to have a widely operating range but efficiency and total pressure ratio penalty compared with that of conventional impeller. The tandem impeller with at least the same impeller efficiency as the conventional design is considered as a critical design criteria so that further modification process based on the flow characteristic of tandem impeller is necessary. In order to restrain the inducer wake and exducer shock losses, parameters modification of blade angle and thickness distributions are necessary and the modified tandem impeller of Series B is obtained. The modified tandem impeller with 25% clocking arrangement shows an 8.45% stall margin increase and maintains the total pressure ratio and efficiency as the conventional design, which proves the potential of tandem impeller to improve compressor stage performance. It is noteworthy that the tandem impellers of Radiver have not shown obviously balanced exit flow field and the fundamental mechanism of stall margin extending of tandem impeller lies on the improved impeller/diffuser matching performance resulting from the incidence angle variation at diffuser inlet.     

激光动态液位测量技术研究

如今,运载火箭大量使用液氧、煤油等液体推进剂,其液位测量技术主要有浮子式、激光式、电容式、雷达式等。介绍并实现了一种激光液位测量系统,该系统体积小、功耗低,可适应多种测量环境,能满足航天燃料液位测量高精度、高动态、连续稳定测量的要求。系统利用相位式激光测距技术,通过测量激光回波信号的相位延迟,计算激光光程从而得到距离数据并通过客户端进行直观展示和数据存储。系统最大测量距离可达100 m,精度为±1 mm。该系统为非接触测量,耐腐蚀,通过加入反射板可实现透明、非透明液体测量。