10 Gbit/s伪随机序列光纤通信系统PMD补偿

光纤通信线路检测到的电功率随差分群延迟变化,可作为PMD补偿的反馈控制信号。给出了这一变化关系的理论计算和曲线并通过实验验证这一关系,确定电压信号与DGD的变化关系。建立了一套完整的实验系统,并考虑了影响反馈电压信号的多种因素以及减小这些影响的措施。通过眼图给出的实验结果说明了补偿的效果,还通过误码测试仪测量了补偿前后的接收灵敏度的改变以定量说明补偿的效果,最后比较了不同情况下的补偿结果。     

模糊关联方法在齿轮箱故障诊断中的应用

模糊关联度故障识别方法是运用灰色系统理论与模糊数学隶属函数相结合，克服了故障诊断的模式向量中参数量纲不同、数量级差异的缺点，综合了灰色系统理论和模糊理论的优点，使故障诊断识别的多参效法更加完善。但此种方法的关键是隶属函数建立的可靠性，关系到故障诊断的准确程度。     

一次火箭参数对RBCC引射模态性能的影响

应用经过校验的三维湍流有限体积数值算法，对引射模态下RBCC模型不同一次引射火箭结构和工作参数条件下的多种工作状态进行了模拟。结果发现：提高一次火箭燃烧室工作压强，二次流量增加，系统推力增加，混合效果增强；一次火箭喷管形状直接影响引射掺混效果，但在保证足够一次流量的前提下，方形管道中可以使用锥形一次喷管，不会带来性能上的较大差异；一次火箭喷管数目增加，掺混质量提高；一次喷管扩张半角的改变不会影响二次引入流量，但会影响掺混效果和一次火箭自身推力；一次喷管面积膨胀比的变化，不会影响二次引入流量．但会改变混合效果。     

某起落架正常收／放系统失效原因分析

正确运用246雷达天线“正常或应急”液压操纵开关和液压马达壳体回油“正常或应急”开关的工作状态，关系到飞机液压操纵系统的安全性。若天线液压操纵开关和马达壳体回油开关配合不当，将引起飞机液压操纵系统失效。     

一类变结构控制系统滑动模态的特征值条件

在单输入双线性常值变结构控制和比例变结构控制及一般双线性常值变结构控制系统的基础上，将系统推广到一般多输入双线性系统的比例变结构控制，引入排序截尾算子取变结构控制律与状态变量中ｍ个绝对值较大的分量成比例实现对ｎ个被控变量的控制，采用李亚普诺夫方法研究这类系统的滑动模态，得出此类系统产生稳定滑模运动的条件，并对该条件进行讨论和简化，将其表述成系统矩阵与双线性矩阵特征值之间的关系式。同时给出了一个三阶     

磁层亚暴膨胀相的近地触发模型

本文指出现有亚暴的中性线模型其源区在赤疲乏面上离地球太远；以ＧＥＯＳ－２的观测资料为依据，提出了亚暴膨胀相的一个近地触发模型－气球模不稳定性模型，该模型认为，在增长相期间到达Ｒ≈（６－１０）ＲＥ的近地等离子体片内边缘区，出现指向地球方向的离子压强梯度，越尾电流强度增大，磁力线向磁尾拉伸。当等离子体片变薄，电子沉降增强，极光带电离层电导率骤增时，气球模不稳定性在近地等离子体片内边缘区被激发，场向电流     

An energy-based coupling degradation propagation model and its application to aviation actuation system

The degradation of components in complex mechatronic systems involves multiple physical processes which will cause coupling interactions among nodes in the system. The interaction of nodes may be carried out not only by physical connections but also by the environment which cannot be described by single network using the traditional methods. In order to give out a unified model to quantitatively describe the coupling degradation spreading by both physical connections and environment, a novel Energy-Flow-Field Network (EFFN) and a coupling degradation model based on EFFN are proposed in this paper. The EFFN is driven by energy flow and the state transition of spatially related nodes is triggered by the dissipation energy. An application is conducted on aviation actuation system in which the degradation spreading by fluid-thermal-solid interaction is considered. The degradation path and the most probable fault reason can be obtained by combining the state transition and energy output of nodes, which is consistent with the given scenario.     

Application of improved active disturbance rejection control algorithm in tilt quad rotor

The Tilt Quad Rotor (TQR) has complex dynamics characteristics, especially in conversion mode. It is difficult to build the dynamic model of the TQR and the environmental factors have a great influence on it. To solve the problem of control in conversion mode of TQR, this paper carries out the design of the controller based on improved Active Disturbance Rejection Control (ADRC). According to the characteristics of flight in conversion mode, Tracking Differentiator (TD) with explicit model is used to solve the problem of multiple integrals when the system is high-order system. Extended State Observer (ESO) with Radial Basis Function (RBF) neural network is used to estimate and compensate for internal and external uncertainties, and the adaptive sliding mode control in Nonlinear State Error Feedback (NLSEF) is used to improve the response speed of the controller and reduce the parameters which should be tuned. Through the flight control simulation of the TQR, the validity and rationality of the control system are verified.     

双框架飞机蒙皮检测机器人切换运动控制方法

针对一种双框架飞机蒙皮检测机器人,通过分析该机器人在飞机表面上的受力情况,在飞机表面该机器人受到了非完整约束,基于牛顿-欧拉法建立了机器人非完整约束动力学模型。根据机器人机械结构和运动步态分析,将该非完整机器人系统分为子系统A和子系统B。为了实现机器人在飞机表面运动,采用反演技术和快速Terminal滑模控制相结合的思想对系统设计了控制器,提出了一种反演-滑模控制方法;对于非完整机器人子系统A和子系统B,设计了一种基于事件驱动的切换策略,实现了机器人对期望轨迹的全局渐近跟踪,并利用Lyapunov稳定性证明系统的跟踪误差收敛。仿真和试验表明,采用该切换策略和反演-滑模控制方法,双框架飞机蒙皮检测机器人可以在飞机表面自由运动并进行损伤检测,具有良好的可靠性和稳定性。