Climatology of extreme upper atmospheric heating events

We use a trio of empirical models to estimate the relative contributions of solar extreme ultraviolet heating, Joule heating and particle heating to the global energy budget of the earth’s upper atmosphere. Daily power values are derived from the models for the three heat sources. The SOLAR2000 solar irradiance specification model provides estimates of the daily extreme EUV solar power input. Geomagnetic power comes from a combination of satellite-derived electron precipitation power and an empirical model of Joule power derived from hemispherically integrated estimates of high-latitude heating, which we discuss in this paper. From 1975 to mid-2002, the average daily contributions were electrons: 51 GW, Joule: 95 GW and solar: 784 GW. Joule and particle heating combine to provide more than 17% of the total global upper atmospheric heating. For the top 10% and 1% of heating events, contributions rise to 20% and 25%, respectively. In the top 15 heating events, geomagnetic power contributed more than 50% of the total power budget. During three events, the Joule power alone exceeded solar power.     

上海电视塔风载试验研究

通过风洞试验研究了上海电视塔的风载分布情况，给出了塔体压力分布、体型系数、局部压力增大系数等风载设计数据，并考查了周围地貌及风向的影响。     

Large-eddy simulation:Past,present and the future

Large-eddy simulation(LES) was originally proposed for simulating atmospheric flows in the 1960 s and has become one of the most promising and successful methodology for simulating turbulent flows with the improvement of computing power. It is now feasible to simulate complex engineering flows using LES. However, apart from the computing power, significant challenges still remain for LES to reach a level of maturity that brings this approach to the mainstream of engineering and industrial computations. This paper will describe briefly LES formalism first, present a quick glance at its history, review its current state focusing mainly on its applications in transitional flows and gas turbine combustor flows, discuss some major modelling and numerical challenges/issues that we are facing now and in the near future, and finish with the concluding remarks.     

考虑来流边界条件不确定性的数值模拟方法

针对气动热力学边界条件不确定性的数值模拟方法,进行了考虑来流边界条件不确定性对流体流动影响研究。算例中提取来流边界条件为设计变量,采用拉丁超立方抽样方法对设计变量进行采样,运用CFD软件对所有样本进行数值模拟计算后得到响应变量,最后分析得到来流边界条件对流体的影响规律。结果表明:来流边界条件中湍流度的不确定性对压力系数的影响大于来流速度的不确定性对压力系数的影响。     

基于现实飞行条件下的飞行员英语陆空通话教学研究

本文首先提出目前飞行员英语陆空通话课堂教学中存在的问题和不足，在此基础上，结合具体事例说明了实际通话中飞行员用语失误或误解所造成的飞行事故，强调了实际飞行条件下飞行员英语陆空通话综合能力提高的必要性和迫切性。最后分析并提出了飞行员英语陆空通话课堂教学方法改进的新举措。     

面对面平行度误差的数学模型

简要地叙述了面对面平行度误差的正交最小二乘评定法和最小条件评定法,并分别建立了评定面对面平行度误差的数学模型。该原理可扩展到其他平行度误差的评定。     

远程实时监控技术在飞机维修中的应用研究

远程实时监控技术是目前国内外航空公司十分关注的,它不仅标志状态监控技术的发展,而且它的应用必将加强航空公司的安全和获得更大的效益,并简要介绍了该项技术研究情况和所遇问题。     

再入航天器防热层/金属结构热匹配评价方法研究

概述了在轨温度交变环境下再入航天器防热层/金属结构热匹配的3种评价方法———温度交变试验、热应力理论计算和有限元模型分析。结合工程实际,介绍了3种方法的应用情况和应用特点:温度交变试验可以定性研究温度交变环境及胶层厚度对结构热匹配特性的影响;热应力理论计算能够在一定程度上量化结构热应力等结果;有限元模型分析可以获得结构任意时刻、任意位置的热应力与热变形的量化数据,具有较大的应用优势。通过对比分析,建议采用温度交变试验与有限元模型分析相结合的方法,以实现防热层/金属结构热匹配特性的准确评价,最终验证防热结构方案设计的合理性。     

Radiation efects on MHD stagnation point flow of nano fluid towards a stretching surface with convective boundary condition

The aim of the present paper is to study the numerical solutions of the steady MHD two dimensional stagnation point flow of an incompressible nano fluid towards a stretching cylinder.The effects of radiation and convective boundary condition are also taken into account.The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis.The resulting nonlinear momentum,energy and nano particle equations are simplifed using similarity transformations.Numerical solutions have been obtained for the velocity,temperature and nanoparticle fraction profles.The influence of physical parameters on the velocity,temperature,nanoparticle fraction,rates of heat transfer and nanoparticle fraction are shown graphically.     

基于双吸叶轮两侧非均衡进气研究轮盘凸台尺寸影响

为明确双吸叶轮两侧叶轮之间的径向轮盘凸台尺寸变化对其总体性能及内部流场的影响,探索不同尺寸轮盘结构叶轮的流动损失机理,基于双吸叶轮两侧非均衡进气条件,采用数值方法对五种径向轮盘尺寸双吸叶轮的三维粘性流场进行了模拟研究。研究结果表明:从双吸叶轮最优性能及最高流动稳定性观点出发,均要求两侧叶轮之间的径向轮盘凸台超出叶片尾缘一定范围;具体超出尺寸范围则需要通过对双吸叶轮的压比、效率性能目标进行折衷确定。径向轮盘凸台尺寸的改变明显影响双吸叶轮两侧叶轮的流量分配,进而影响扩压器内分离流动损失大小及双吸叶轮的整体性能。另外,相比于较大径向轮盘凸台,无径向轮盘凸台结构更容易造成双吸叶轮两侧叶轮流量差距悬殊。 