Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

液氢贮箱停放过程中的力热分析

为了寻找到运载火箭长时间停放过程中液氢贮箱的最经济液位,用于制定合理的发射流程以及紧急处置方法,采用计算流体力学(CFD)技术,对某型运载火箭停放期间液氢贮箱的力、热情况进行了仿真计算和分析。计算选用了VOF(Volume-of-fluid)两相流模型以及Lee相变模型,为了提高Lee模型在不同压力情况下对相变过程的模拟精度,采用安托因方程修正了该模型。修正后的模型首先由试验数据校验了其精确性,随后开展的液氢贮箱停放过程仿真结果表明：贮箱的竖直方向与径向均存在温度分层的现象,液相内会形成大的漩涡,该漩涡会使得冷热流体不断进行热交换,并导致贮箱内部的液氢出现气化。贮箱停放期间蒸发率最大值超过2 m 3/h,发生在停放4 h左右;而贮箱液位充填至37 m 3以上或17 m 3以下时蒸发率较低,最小值接近1 m 3/h。     

永磁约束电子束轨迹实验研究

通过设计并运用一种直流电子束轨迹简易测量方法,开展了永磁约束电子束轨迹实验研究,得到了永磁铁环对60~80 ke V电子束约束作用的实验数据。结果表明:该测量方法方便有效,结果较为准确;永磁铁对电子束聚焦作用明显,并呈现出一定的规律性。对永磁铁约束电子束研究工作奠定了基础。     

多芯片组件（MCM）用金锡焊带材料电阻率及热导率温度特性研究

对牌号为Au₈₀Sn₂₀的金锡焊带材料在208~423 K的电阻率及热导率与温度的函数关系进行了研究,并对其在多芯片组件（MCM）中的传热效果进行了评估。分别对材料在208~423 K中5个温度点的电阻率及4个温度点的热导率进行了测试,基于理论模型建立电阻率/热导率随温度变化的函数关系,最终采用模拟热扩散数值方法评估材料在高温下的传热能力。结果表明,采用修正函数模型后,金锡焊带材料在208~423 K下热导率与电阻率的关系符合测试结果,随芯片表面温度的边界条件从208 K升高至423 K,采用变温热导率模型得到的热流密度模拟计算结果相比理想化恒定热导率模型的差异性逐渐升高至5.5%。综上,金锡焊带材料热导率与电阻率的关系符合Wiedemann-Franz法则修正后的Smith-Palmer方程,在该材料传热设计时应考虑其热导率温度效应。     

类IXV飞行器初期再入制导与姿态控制方法研究

摘要： 针对类IXV飞行器无翼式升力体构型及采用RCS/尾襟翼组合控制特点,研究其初期再入段的高精度制导与姿态控制方法.设计带过程约束的数值预测 校正制导律以提高制导系统的鲁棒性及精确性;根据其执行机构配置特点,设计基于RCS的航向控制律及基于RCS/气动舵的纵、横向复合控制律,并采用鲁棒伺服LQR技术进行控制参数快速设计.通过蒙特卡洛打靶仿真来验证算法的精度及鲁棒性.     

下颔式进气道实验研究

为了验证下颔式进气道 /前机身一体化设计方案的合理性及其进气道性能 ,对下颔式进气道 /前机身一体化设计方案进行了实验研究。测出了进气道总压恢复系数、畸变指数随流量系数、攻角、侧滑角的变化规律。结果表明 ,进气道性能较好 ,进气道 /发动机匹配良好。最后提出了下颔式进气道的进一步改进措施     

相关系数平稳过程时频分析方法

相关系数平稳过程是从非平稳过程中分离出的一类工程上常见且便于研究的随机过程,其均值和方差都可随时间变化,传统的平稳随机过程是它的一个特例。本文提出了相关系数AR(p),MA(q)和ARMA(p,q)序列的概念,建立了相关系数平稳过程的时频分析方法。该方法首先在时域进行全程分析,得到相关系数平稳过程的均值函数、方差函数和相关系数函数,然后可以对其进行傅里叶变换、短时傅里叶变换或小波变换,给出相关系数平稳过程的谱密度,同时提出了随机项谱密度和趋势项谱密度的概念。文中还讨论了线性系统对相关系数平稳过程输入的响应。