基于高斯过程的机器人自适应抓取策略

在机器人抓取作业时,目标物体的位姿经常发生变化。为了使机器人在运动过程中能够适应物体的位姿变化,提出了一种基于高斯过程的机器人自适应抓取策略。该方法建立了从观测空间到关节空间的映射,使机器人从样本中学习,省去了机器人视觉系统的标定和逆运动学求解。首先,拖动机器人抓取物体,记录物体的观测变量和机器人的关节角度;然后,利用记录的样本训练高斯过程模型,实现观测变量和关节角度的关联;最后,当得到新的观测变量时,通过训练的高斯过程模型得到机器人的关节角度。经过训练后,UR3机器人成功抓取了物体。     

一种新型机载对地观测用三轴稳定平台陀螺安装方式

陀螺安装方式及相应的算法编排是稳定平台设计中的一项关键技术。针对机载对地观测用三轴稳定平台特点,提出了将方位陀螺安装在方位环上,俯仰陀螺和横滚陀螺安装在俯仰环上的陀螺安装方式。利用空间矢量分解理论分析了陀螺输出角速度信号的投影关系及电机控制信号的分配;基于稳定平台系统模型,对理想正交情况和考虑陀螺安装误差情况进行了仿真分析,验证了此种安装方式的可行性和优越性。分析表明,在同等条件下,所提出的安装方式减小了稳定平台的机械尺寸,降低了稳定平台的重量和功耗,实现了三维角速度的正交测量,简化了三轴解耦控制算法。研究结论可为其他三轴稳定平台结构设计和陀螺安装方式设计提供参考。     

近地卫星编队构形保持方法

针对J2摄动和大气摄动导致低轨编队卫星构型破坏的情况,基于高斯摄动方程给出了以平均轨道根数为被控制量的脉冲控制模型。利用法向脉冲调整轨道倾角和升交点赤经偏差,在轨道上2个位置施加径向和切向脉冲调整其余轨道根数偏差从而修正卫星编队构形。最后通过数值仿真验证了算法的简单性、有效性。     

钻地弹斜侵彻混凝土靶的工程计算模型

为了研究侵彻过程中钻地弹受力不对称性下的运动轨迹,结合动力学基本方程和经典空腔膨胀理论,基于层裂机理,建立了具有倾角和攻角相结合的卵形弹侵彻混凝土的工程模型。利用该模型得到了弹体头部运动轨迹与倾角、攻角以及速度的关系,结果表明侵彻深度随着倾角的增大而明显减小,弹体头部运动轨迹的弯曲弧度也越大;攻角越大,产生的偏转力矩越大。对工程模型进行试验验证,结果吻合较好,该模型能够有效地反映出斜侵彻过程的主要特征,进而说明该模型的适用性与合理性。     

Spatial heterogeneity in the radiogenic activity of the lunar interior: Inferences from CHACE and LLRI on Chandrayaan-1

In the past, clues on the potential radiogenic activity of the lunar interior have been obtained from the isotopic composition of noble gases like Argon. Excess Argon (40) relative to Argon (36), as compared to the solar wind composition, is generally ascribed to the radiogenic activity of the lunar interior. Almost all the previous estimates were based on, ‘on-the-spot’ measurements from the landing sites. Relative concentration of the isotopes of ⁴⁰Ar and ³⁶Ar along a meridian by the Chandra’s Altitudinal Composition Explorer (CHACE) experiment, on the Moon Impact Probe (MIP) of India’s first mission to Moon, has independently yielded clues on the possible spatial heterogeneity in the radiogenic activity of the lunar interior in addition to providing indicative ‘antiquity’ of the lunar surface along the ground track over the near side of the moon. These results are shown to broadly corroborate the independent topography measurements by the Lunar Laser Ranging Instrument (LLRI) in the main orbiter Chandrayaan-1. The unique combination of these experiments provided high spatial resolution data while indicating the possible close linkages between the lunar interior and the lunar ambience.     

Feasibility of performing space surveillance tasks with a proposed space-based optical architecture

Under ESA contract an industrial consortium including Aboa Space Research Oy (ASRO), the Astronomical Institute of the University of Bern (AIUB), and the Dutch National Aerospace Laboratory (NLR), proposed the observation concept, developed a suitable sensor architecture, and assessed the performance of a space-based optical (SBO) telescope in 2005. The goal of the SBO study was to analyse how the existing knowledge gap in the space debris population in the millimetre and centimetre regime may be closed by means of a passive optical instrument. The SBO instrument was requested to provide statistical information on the space debris population in terms of number of objects and size distribution. The SBO instrument was considered to be a cost-efficient with 20 cm aperture and 6° field-of-view and having flexible integration requirements. It should be possible to integrate the SBO instrument easily as a secondary payload on satellites launched into low-Earth orbits (LEO), or into geostationary orbit (GEO). Thus the selected mission concept only allowed for fix-mounted telescopes, and the pointing direction could be requested freely. Since 2007 ESA focuses space surveillance and tracking activities in the Space Situational Awareness (SSA) preparatory program. Ground-based radars and optical telescopes are studied for the build-up and maintenance of a catalogue of objects. In this paper we analyse how the proposed SBO architecture could contribute to the space surveillance tasks survey and tracking. We assume that the SBO instrumentation is placed into a circular sun-synchronous orbit at 800 km altitude. We discuss the observation conditions of objects at higher altitude, and select an orbit close to the terminator plane. A pointing of the sensor orthogonal to the orbital plane with optimal elevation slightly in positive direction (0° and +5°) is found optimal for accessing the entire GEO regime within one day, implying a very good coverage of controlled objects in GEO, too. Simulations using ESA’s Program for Radar and Optical Observation Forecasting (PROOF) in the version 2005 and a GEO reference population extracted from DISCOS revealed that the proposed pointing scenario provides low phase angles together with low angular velocities of the objects crossing the field-of-view. Radiometric simulations show that the optimal exposure time is 1–2 s, and that spherical objects in GEO with a diameter of below 1 m can be detected. The GEO population can be covered under proper illumination nearly completely, but seasonal drops of the coverage are possible. Subsequent observations of objects are on average at least every 1.5 days, not exceeding 3 days at maximum. A single observation arc spans 3° to 5° on average. Using a simulation environment that connects PROOF to AIUB’s program system CelMech we verify the consistency of the initial orbit determination for five selected test objects on subsequent days as a function of realistic astrometric noise levels. The initial orbit determination is possible. We define requirements for a correlator process essential for catalogue build-up and maintenance. Each single observation should provide an astrometric accuracy of at least 1”–1.5” so that the initially determined orbits are consistent within a few hundred kilometres for the semi-major axis, 0.01 for the eccentricity, and 0.1° for the inclination.     

加力燃烧室双层喷油杆内冷却气流动特性

对新型外涵引气冷却双层壁加力喷油杆的冷气流动特性进行了模拟实验,为双层喷油杆结构设计和冷却性能研究提供基础.通过对8套不同结构尺寸实验件的研究,得到了双层喷油杆冷却套管内气流流阻系数随来流质量流量的变化规律、流阻系数随双层喷油杆结构尺寸的变化规律和冷却套内气流雷诺数随进口总压的变化规律等.对8套实验件结果进行比较,综合三个因素最终选择了较为合理的新型双层喷油杆结构尺寸.这种尺寸的喷油杆流阻系数为1.2,迎风尺寸宽16mm较为合适,相同工况下冷却气的雷诺数最大.      

同步轨道遥感器热设计和热分析

为解决遥感器在同步轨道环境温度场分析中热传导与热辐射的综合处理问题,热传导模型温度计算采用控制容积方法建立有限差分方程;热辐射模型采用奥本海姆方法计算设备表面单元之间辐射换热;根据是否被遮挡,辐射换热中表面单元角系数的计算分别采用积分和数值方法。计算结果表明,采用上述方法进行温度场分析能够有效解决热传导模型与热辐射模型的耦合,求解精度较高,遥感器设备部件稳态分析温度分布和在轨瞬态分析温度曲线变化清楚,可作为进一步精密热控设计的依据。     

基于紫外敏感器和星敏感器的卫星自主导航

卫星利用紫外敏感器和星敏感器进行自主导航的方法中地心矢量的测量精度是影响导航精度的重要因素之一,而地心矢量的测量又受到地球扁率的影响。在考虑地球扁率的前提下,研究了地球扁率对地心矢量测量的影响,给出了基于卫星姿态的地心矢量的补偿方法。仿真结果表明该补偿方法具有较高的补偿精度,并且能有效地提高卫星自主导航精度。     

红外地球敏感器地面静电放电模拟试验方法研究

 设计了红外地球敏感器的地面模拟卫星静电放电试验方法。对卫星的空间环境以及结构特点的分析结果表明,地球同步静止轨道卫星表面存在静电放电的可能性。通过静电放电试验找到了红外地球敏感器易受干扰的部位并提出了解决措施。