面向非结构混合网格高精度阻力预测的梯度求解方法

针对非结构混合网格的特点,通过改进传统的Green-Gauss梯度求解方法,提出了一种可提高非结构混合网格黏性计算精度的节点型Green-Gauss梯度求解方法。利用改进后的方法,完成了DLR-F4翼身组合体算例的计算和对比分析。改进后的梯度求解方法残差收敛更好,下降量级更多,阻力系数和试验吻合更好,激波区域压力分布和分离区域流场细节的模拟更精确,说明改进后的梯度求解方法有效提高了程序的鲁棒性和阻力预测精度,验证了方法的有效性。采用改进后的方法对第5届AIAA阻力预测研讨会的通用研究模型（CRM）进行了详细的模拟分析,结果表明：改进的梯度求解方法更加适用于非结构混合网格的黏性计算,计算精准度达到国际同类CFD软件水平,进一步验证了改进方法的可靠性。     

乙烯燃烧化学动力学机理的简化与分析

为了获得高精度、小尺寸的乙烯简化机理,采用基于误差传播的直接关系图(DRGEP)法和反应路径分析(PFA)法对USC(University of Southern California)-Ⅱ机理在宽范围工况下进行简化,通过取交集方式得到了包含38个组分和243个反应的框架机理,采用灵敏性分析得到了包含30个组分和167个反应的框架机理,其最大点火延时误差为7.10%。在较宽的工况范围内对30个组分的框架机理进行了验证与机理分析,结果表明:此框架机理在点火延时,火焰传播速度,温度曲线,组分摩尔分数曲线,反应的灵敏性系数,反应路径和不确定性等燃烧特性参数与详细机理吻合较好。通过准稳态假设(QSSA)方法简化得到了更适用于工程应用的24个组分和20个总包反应的全局简化机理,并验证了其点火延时。      

仿生减阻翼型的气动性能

利用一种基于滑移边界理论的仿生肋条结构的模化方法,对仿生减阻翼型的气动性能开展了数值模拟研究。结果显示:肋条结构同时布置在翼型压力面和吸力面湍流区域时,仿生减阻翼型的阻力可降低1.73%~3.07%,升阻比可提高2.10%~4.08%,其中黏性阻力的减小是总阻力下降的主要原因。对流场分析表明,仿生减阻翼型的速度曲线出现一定抬升,使得湍流边界层中的黏性子层增厚,进而导致了仿生减阻翼型气动性能的提升。      

基于三迭代与二阶锥规划的机载MIMO雷达稳健降维STAP方法

针对机载多输入多输出(MIMO)雷达空时自适应处理(STAP)中期望目标导向矢量的失配问题,提出一种基于三迭代(TRIA)与二阶锥规划(SOCP)的稳健降维MIMO-STAP方法。首先将MIMO-STAP权矢量分解为发射、接收、多普勒3个低维权矢量的Kronecker积,然后分别限定实际发射、接收、多普勒导向矢量与假定导向矢量之间的误差范数边界,通过优化最差性能,利用SOCP对各个低维权矢量进行三迭代求解,最后进行权矢量合成。该方法在保证机载MIMO雷达获取稳健STAP性能的同时,通过三迭代降维处理,能够有效降低训练样本数需求与运算复杂度,因此更具有实际应用价值。仿真结果验证了算法的有效性。     

矩的显式积分算法研究与应用

矩的求解通常被用于求解有限元、体积、惯性矩等问题中.基于矩的叠加性,首先给出了在三维空间中计算域的离散方式,并推导了矩的显式积分公式,随后将其推广到n维空间中,该表达式易于在计算机上实现;设计了矩的并行计算算法,并通过Fortran和Python混编的方式,实现了矩的并行计算;对多重精度下的样例数据给出了一个算例,实现了零阶矩和二阶矩的计算,并和串行算法、逐次降维算法作出比较,进行了效率分析和误差分析.结果显示,矩的显式积分并行计算算法易于程序实现,并且在效率上高于串行算法,能够很容易推广到高维空间,该算法具有高度可并行性,误差主要来自计算域离散.      

双后掠鸭翼气动特性的数值模拟

首先针对具有中等前缘后掠角梯形鸭翼的缺点提出双后掠鸭翼概念,然后分别对安装梯形鸭翼和双后掠鸭翼的近距耦合鸭式布局的气动性能进行数值模拟研究,分析影响双后掠鸭翼气动性能的流动机理。研究表明：在大迎角时,对于双后掠鸭翼,具有较大前缘后掠角的外翼段可以使鸭翼涡在涡核破裂后仍能形成稳定集中涡并保持较高的强度,增加鸭翼本身的失速迎角,并通过诱导作用改善机翼外翼段流场,进而提高全机大迎角性能,但在小迎角时会破坏鸭翼附着流或前缘气泡涡的发展,造成略微的升力损失。拥有较大失速迎角的双后掠鸭翼在小迎角时具有较大的可用偏度,可以增强布局的抬头控制能力。双后掠鸭翼在满足隐身约束的前提下,超声速阻力较小,具有较好的超声速性能。     

亚声速翼身融合无人机概念外形参数优化

为了兼顾翼身融合（BWB）布局无人机（UAV）的气动、隐身和结构重量要求,应用优化方法研究了某亚声速翼身融合无人机概念方案的外形设计问题。外形优化设计流程包括全机参数化几何外形模型、气动分析、机翼根部弯矩计算、雷达散射截面（RCS）分析、代理模型的建立和外形参数优化计算。选择了三种不同优化目标研究翼身融合无人机外形优化问题：①未配平状态升阻比最大;②配平状态升阻比最大;③配平状态升阻比尽量大和机翼弯矩尽量小。通过优化结果的对比分析,揭示了配平约束和机翼弯矩目标对优化设计结果的影响。研究结果表明：计入配平约束能够有效提高配平升阻比;将配平状态升阻比尽量大和机翼根部弯矩尽量小作为优化目标能够获得合理的优化外形。     

面向控制的燃油调节器动态特性研究

作为吸气式发动机燃油控制系统的被控对象,燃油调节器的动态特性对调节器自身的性能优化和控制系统设计均至关重要。基于燃油调节器的工作原理,采用集中参数法建立了燃油调节器的非线性模型,对其进行小偏差线性化得到其状态空间模型,计算获得其传递函数,并详细分析了燃油调节器的动态特性影响因素,为燃油调节器性能优化提供参考。通过模型降价简化传递函数模型获得其一阶模型,分析表明一阶模型和原模型的频域特性符合的很好,低阶模型能够表示燃油调节器的动态特性,为燃油控制系统设计和控制参数优化奠定了基础。     

Experiment of drag characteristics of a novel variable geometry flame-holder

A novel variable geometry flame-holder (VGF) based on V-gutter was presented. The structural characteristics of the flame holder were introduced. Experimental study on drag characteristics of the VGF on un-burning and burning states was conducted in a rectangular combustion test rig. The influence of the change of gutter trailing edge width w on pressure recovery in different operating conditions was analyzed emphatically. Furthermore,drag characteristics in different trailing edge width variation modes were discussed. Results show that: (1) Narrowing w can observably raise the total pressure recovery σ but the highest σ is not obtained at minimum w. (2) The relationship of drag coefficient ψ and w in the un-burning conditions can be well expressed in a form of exponential equation (w/d>0.4). (3) Drag characteristics are not sensitive to the variation modes and speeds of w . (4) In the burning condition,σ decreases with the increasing of w basically and the course can be divided into three stages. The results and experimental data presented in this paper would enhance the phenomenological understanding of this type of VGF,and would contribute to the next experimental study and numerical calculus of this novel VGF.      

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.