红外气体分析中环境影响的补偿方法研究

环境温度、总压影响是红外气体分析中难以有效解决的主要问题之一，本文以二氧化碳气体为测量对象，采用实验手段，单片机和数据自理技术建立了环境温度、总压对红上气体分析影响的补偿数学模型和求解方法，并进行了实验验证，研究的内容为红外气体分析中影响影响的外补偿开始辟了一条新的途径，具有广阔的应用前景。     

日地共转扰动似稳结构及其反相和漂移规律的最新证据

日地共转扰动似稳结构及其反相现象在第２１及２２周再次显现，从而证实了上述发现是一种在长达世记的时间尺度内存在的普遍规律。包括１９９１－１９９２年内的百年地磁扰动资料还说明偶数太阳周的共转似稳结构扰动峰有逆太阳自转而线性性漂移的趋向。对即将来临的极小年前可能出现的共转扰动作了试验性的预测。     

基于双量程推力传感器的精确测力技术

针对双量程推力传感器在使用中测试精度低的问题,结合传感器固有特性,开展了传感器动态特性分析及误差补偿方法的研究。通过有限元分析和力锤冲击试验,结合结构分析获得了双量程力传感器等效二自由度和三自由度动力学模型。利用近似求积数值法对冲击力试验输出信号进行补偿,获得了接近标准信号的测试结果,对该补偿方法进行了有效性验证。结果显示:本方法对发动机试验的推力信号进行了补偿,推动了单室双推力发动机推力的精确测量,为双推力发动机的推力测试提供了有效途径。     

自抗扰技术在船载天线伺服系统中的应用研究

为减小船摇扰动对船载天线伺服系统指向及跟踪精度的影响，引入线性自抗扰控制器（LADRC）对伺服系统位置环进行改进。首先对天线伺服系统模型进行简要分析，建立系统状态空间方程；然后利用LADRC对系统进行改进，并对其参数设计进行了详细介绍，同时为提高系统动态跟踪性能，利用TD微分器提取目标速度信息进行前馈补偿；最后经实验测试验证，LADRC相对于传统PID控制器能够保持天线伺服系统动态性能不下降，同时有效提高系统的抗船摇性能。     

非对称投弹及非对称挂载补偿控制技术研究

针对战斗类飞机非对称投弹和非对称挂载这类情况,分析了投弹时横向扰动及纵向机动时横向耦合的机理,描述了其对飞行安全的威胁;通过引入所投弹质量、位置以及飞机法向过载,设计了非对称投弹/非对称挂载补偿控制律.仿真验证结果表明:该补偿控制律可消除上述两种情况下的横向扰动,有助于非对称投弹时飞机状态的保持,更重要的是提高了非对称挂载情况下着陆的安全性.     

直升机机内PWM照明调光系统产生音频干扰问题的研究

在直升机机内照明调光领域，国外军机已广泛采用脉冲宽度调制（PWM）调光方式。PWM调光方式相比传统线性调光方式具有以下明显优点：效率高，调光范围宽，功耗小，带载能力强，附加损耗小等。但PWM调光系统的不足是电磁辐射，尤其会对机内通话系统产生音频干扰，在机通耳机中会出现明显干扰声，影响机内通话质量。本方案能有效抑制PWM...     

Saw-tooth substorms: Inconsistency of repetitive bay-like magnetic disturbances with behavior of aurora

The relationships between the magnetic disturbance onsets, aurora dynamics and particles injections at the geostationary orbit have been analyzed in detail for 25 sawtooth substorms. It is shown that inconsistency between the above signatures of the substorms onset is typical of the powerful sawtooth substorms, unlike the isolated (“classical”) magnetospheric substorms. The distinguishing feature of the aurora in case of saw-tooth substorms is permanently high level of auroral activity irrespective of the magnetic disturbance onsets and the double oval structure of the aurora display. The close relationship between the aurora behavior and the particle injections at geostationary orbit is also broken. The conclusion is made, that the classical concept of the substorm development, put forward by Akasofu (1964) for isolated substorms, is not workable in cases of the sawtooth disturbances, when the powerful solar wind energy pumping into the magnetosphere provides a permanent powerful aurora particle precipitation into the auroral zone.     

Effects of sector structure of the interplanetary magnetic field on the upper mesosphere–lower thermosphere dynamics

In this paper we study the influence of the interplanetary magnetic field (IMF) polarity changes caused by the Earth passing through the IMF sector boundary on the dynamic processes taking place in neutral atmosphere within the altitude interval of the upper mesosphere–lower thermosphere (83–101 km). The analysis has revealed the influence of the IMF sector structure on dynamics of the upper mesosphere–lower thermosphere. There has been a significant seasonal variation of the wind reaction to the IMF polarity changes observed. The influence of the IMF polarity changes on neutral atmosphere dynamics within the altitude range of 83–101 km is most pronounced in the zonal component of neural wind when the IMF polarity changes from negative to positive in all the seasons except for spring and when IMF polarity changes from positive to negative – in spring only.     

基于LabVIEW的单光子探测器量子效率测控软件设计CSCD

介绍了利用相关光子法测量单光子探测器量子效率的原理和测量系统,开发了一套用于该系统的测控软件。软件采用Lab VIEW的标准状态机结构,使用VISA串口程序库、Active X控件和报表生成器,编写了激光器控制、符合光子测量、测试报告生成等分支程序,实现控制状态机分支的切换,和其他各项功能的调用。实际应用表明,该软件测控系统运行可靠、界面友好,满足单光子探测器量子效率测量的要求。     

Application of novel force control strategies to enhance robotic abrasive belt grinding quality of aero-engine blades

Robotic belt grinding has emerged as a finishing process in recent years for machining components with high surface finish and flexibility.The surface machining consistency, however,is difficult to be guaranteed in such a process.To overcome this problem, a method of hybrid force-position control combined with PI/PD control is proposed to be applied in robotic abrasive belt grinding of complex geometries.Voltage signals are firstly obtained and transformed to force information with signal conditioning methods.Secondly, zero drift and gravity compensation algorithms are presented to calibrate the F/T transducer which is installed on the robot end-effector.Next, a force control strategy combining hybrid force-position control with PI/PD control is introduced to be employed in robotic abrasive belt grinding operations where the force control law is applied to the Z direction of the tool frame and the positon control law is used in the X direction of the tool frame.Then, the accuracy of the F/T transducer and the robotic force control system is analyzed to ensure the stability and reliability of force control in the robotic grinding process.Finally, two typical cases on robotic belt grinding of a test workpiece and an aero-engine blade are conducted to validate the practicality and effectiveness of the force control technology proposed.