钢管混凝土柱极限承载力分析的分段合成法

在计算钢管混凝土受压构件弹塑性极限承载力的合成法基础上,提出了一种新的数值计算方法--分段合成法,计算假设仅包括平截面假设和考虑紧箍力影响的钢管混凝土的应力-应变关系,取消了原合成法中对柱变形曲线的假设,积分时不仅需要在截面上划分单元而且还需沿杆长划分单元,因而可考虑柱多个截面的平衡条件.与原合成法相比,该方法不仅适用于轴压构件和两端偏心距相等的偏压构件,而且还适用于两端偏心距不等的偏压构件的弹塑性极限承载力计算.利用提出的方法和程序,计算了圆形截面钢管混凝土轴压长柱、两端偏心距相等的偏压长柱以及两端偏心距不等的偏压长柱的弹塑性极限承载力,理论分析结果与文献中的理论结果和试验结果均吻合良好.     

Attitude Control Considering Variable Input Saturation Limit for a Spacecraft Equipped with Flywheels

A new attitude controller is proposed for spacecraft whose actuator has variable input saturation limit. There are three identical flywheels orthogonally mounted on board. Each rotor is driven by a brushless DC motor (BLDCM). Models of spacecraft attitude dynamics and flywheel rotor driving motor electromechanics are discussed in detail. The controller design is similar to saturation limit linear assignment. An auxiliary parameter and a boundary coefficient are imported into the controller to guarantee system stability and improve control performance. A time-varying and state-dependent flywheel output torque saturation limit model is established. Stability of the closed-loop control system and asymptotic convergence of system states are proved via Lyapunov methods and LaSalle invariance principle. Boundedness of the auxiliary parameter ensures that the control objective can be achieved, while the boundary parameter’s value makes a balance between system control performance and flywheel utilization efficiency. Compared with existing controllers, the newly developed controller with variable torque saturation limit can bring smoother control and faster system response. Numerical simulations validate the effectiveness of the controller.     

Analysis of data of “Clementine” and “KAGUYA” missions and “ULCN” and “KSC-1162” catalogues

In this paper an analysis of data coordinate systems from selenographic catalogues and space missions was carried out. The lunar macrorelief models were made on basis of the software package ASNI USTU using method of the spherical harmonic expansion. These models accurately describe the global features of the lunar figure. To construct these models the following sources of topographic information were used: “Clementine” and “KАGUYА” (Selena, Japan mission) missions, “KSC-1162” (Kazan selenocentric catalogue), “Kiev” (selenodesic catalogue), “SAI” (Chuikova (1975)), “Bills, Ferrari”, “ULCN” (The Unified Lunar Control Network 2005). Direct comparison hypsometric information “KSС-1162” catalogue data with “Clementine” mission was carried out. These researches confirmed a good agreement of the hypsometric information of compared systems. The normalized coefficients were obtained on basis of the hypsometric information expansion for eight sources. The displacement of the lunar center of mass (LCM) relatively to the lunar center of figure (LCF) was obtained by using topographic data selenodetical catalogues and space missions.     

基于非参数假设检验的程序缺陷定位方法

调查了西门子测试集中的程序失败用例的规模和谓词评估偏差的分布.结果表明,中心极限定理的前提和参数假设检验的假设条件无法得到普遍满足.所以,已有的基于参数假设检验的方法存在潜在的问题.针对这一现象,提出了基于非参数假设检验定位程序缺陷的方法.实验结果表明,该方法在非正态分布的样本集上仍具有较好的适用性,且在缺陷定位效率上优于已有的基于程序谓词的缺陷定位技术.同时比较了基于2种常用的非参数假设检验模型的缺陷定位方法的效率.一种方法基于Kolmogorov-Smirnov检验,另一种方法基于Cramér-von-Mises准则.比较结果表明,在西门子测试集上,基于Kolmogorov-Smirnov检验的方法在缺陷定位效率上优于基于Cramér-von-Mises准则的方法.     

一种改进的直接转矩控制算法

分析了转矩角与定转子磁链角速度及电机速度的关系,提出一种新的直接转矩控制算法.通过转矩角增量和定转子磁链的位置,计算出补偿转矩和定子磁链的参考电压矢量,基于空间矢量调制技术实现对逆变器电压状态的控制,改善了系统的性能.给出了仿真结果,证明了算法的合理性和有效性.     

Identifying areas of high economic-potential copper mineralization using ASTER data in the Urumieh–Dokhtar Volcanic Belt,Iran

This study investigates the application of spectral image processing methods to ASTER data for mapping hydrothermal alteration zones associated with porphyry copper mineralization and related host rock. The study area is located in the southeastern segment of the Urumieh–Dokhtar Volcanic Belt of Iran. This area has been selected because it is a potential zone for exploration of new porphyry copper deposits. Spectral transform approaches, namely principal component analysis, band ratio and minimum noise fraction were used for mapping hydrothermally altered rocks and lithological units at regional scale. Spectral mapping methods, including spectral angle mapper, linear spectral unmixing, matched filtering and mixture tuned matched filtering were applied to differentiate hydrothermal alteration zones associated with porphyry copper mineralization such as phyllic, argillic and propylitic mineral assemblages.     

空间碎片现状与清理

分析了空间碎片的严峻现状和空间碎片的10个来源,指出轨道碰撞是产生碎片最多的因素;介绍了空间碎片的观测方法、原理和观测系统的概况,包括正在兴建的观测系统——“空间篱笆”。最后,根据不同轨道高度和空间碎片的数量与大小,提出空间碎片清理原则、要求和9种清理方法。     

Aerodynamic design of tractor propeller for high-performance distributed electric propulsion aircraft

Aiming to maximize the aerodynamic performance of the Distributed Electric Propulsion (DEP) aircraft, a hybrid design framework which focuses on the aerodynamic performance of the propeller/wing integration has been developed and validated numerically. Variable-fidelity modelling for propeller aerodynamics has been used to achieve computational efficiency with reasonable accuracy. By optimizing the aerodynamic loading distributions on the tractor propeller disk, the induced slipstream is redistributed into a form that is beneficial for the wing downstream, based on which the propeller blade geometry is generated through a rapid inversed design procedure. As compared with the Minimum Induced Loss (MIL) propeller at a specified thrust level, significant improvements of both the lift-to-drag ratio of the wing and the propeller/wing integrated aerodynamic efficiency is achieved, which shows great promise to deliver aerodynamic benefits for the wing within the propeller slipstream without any additional devices.     

民机数字档案馆的建设探索

民用飞机研发项目是国家重大专项之一,采用了先进的全数字化设计技术。其主制造商-供应商的研发模式对档案管理工作提出了新的要求,有必要建立民机数字档案馆以满足大量电子文件的管理需要和跨地区协同工作对档案利用的需求。对民机数字档案馆的基本架构及构建方式进行了探讨。     

基于Simulink的直接序列扩频通信系统的仿真

卫星通信系统测试扩频信号源需具备自检功能。文章利用MATLAB的可视化工具箱Simulink建立了直扩通信系统的仿真模型,为扩频信号源自检程序设计提供参考。采用滑动相关捕获算法、单△值非相干延迟锁定伪码跟踪环,实现了伪码同步。仿真结果表明,该系统可无误码地恢复发端原始信息。