冲击加速度校准中低通滤波器的应用

介绍了在冲击加速度校准中,为了抑制电、机械等干扰和噪声对冲击加速度测量结果的影响,采用二阶巴特沃斯型低通滤波器,通过时间序列翻转、二次滤波等方式,实现零相移的低通滤波效果。并比较不同截止频率下,低通滤波器对衰减程度不同的冲击加速度波形产生的峰值偏差,给出不同加速度波形下,低通滤波器截止频率选择应注意的问题。     

IMPROVEMENT OF PHASE GRADIENT AUTOFOCUS ALGORITHM

ＩＭＰＲＯＶＥＭＥＮＴＯＦＰＨＡＳＥＧＲＡＤＩＥＮＴＡＵＴＯＦＯＣＵＳＡＬＧＯＲＩＴＨＭＬｉＬｉｗｅｉ（李立伟），ＭａｏＳｈｉｙｉ（毛士艺），ＡｓｉｆＲａｚａ，ＬｉｕＹｉｎｇ（刘莹）（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ...     

DBV-RCS中一种提高时延性能的时隙分配方法(英文)

在DVB-RCS卫星通信中,为某个业务分配的时隙在MF-TDMA帧中的位置分布将影响该业务的时延特性。本文分别针对固定速率和实时可变速率业务,对MF-TDMA的帧长度、终端分配的时隙数量及位置分布与业务时延性能之间的关系进行了建模分析。理论分析表明时隙位置是影响业务时延的一个重要因素,位置分布越均匀,越能提高业务的时延性能;时隙均匀分配相比传统的时隙连续分配可以有效降低业务平均时延,且时延不随帧长的变化而变化;在时隙均匀分配方式下,提高实时可变速率业务的带宽分配可以更有效的提高时延性能。在DVB-RCS标准基础上,提出了一种与标准完全兼容的时隙均匀分配方法(TUAM),通过计算机仿真验证了算法的有效性以及建模分析的正确性,该算法可有效地保证业务具有极低的平均时延和时延抖动,使得VoIP等实时业务不会由于端到端时延过大而丢包,提高了DVB-RCS系统对于实时业务QoS的保障能力。     

Love Waves in Layered Graded Composite Structures with Imperfectly Bonded Interface

Theoretical analysis and numerical calculations of Love wave propagation in layered graded composites with imperfectly bonded interface are described in this paper. On the basis of WKB method, the approximate analytic solutions for Love waves are obtained. By the interface shear spring model, the dispersion relations for Love waves in layered graded composite structures with rigid, slip, and imperfectly bonded interfaces are given, and the effects of the interface conditions on the phase velocities of Love waves in SiC/Al lay- ered graded composites are discussed. Numerical analysis shows that the phase velocity decreases when the defined flexibility parameter is greater. For the general imperfectly bonded interface, the phase velocity changes in the range of the velocities for the rigid and slip interface conditions.     

一种基于分步过渡的再入段组合导引法

针对比例导引法在弹道导弹再入段误差修正时可能引起的导弹攻角和侧滑角变化剧烈的问题,提出了一种基于分步过渡的再入段组合导引法,并采用了一种考虑弹道倾角增量和弹道偏角增量变化范围的过渡段计算方法。仿真结果表明,改进的组合导引法减小了侧滑角和横向过载的变化范围,并减弱了两种导引法交班段的攻角、侧滑角和过载突变问题,在保证导弹末段飞行稳定控制的同时减小了再入段误差对导弹射击精度的影响。     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Seasonal variations of GPS derived TEC at three different latitudes of the southern hemisphere during geomagnetic storms

Data from the archive of the International GNSS Services (IGS) were used to study the seasonal variations of Total Electron Content (TEC) over three stations located at different latitudes in the southern hemisphere during the geomagnetic storms of 11 January, 6 April, 8 June, and 13 October 2000, representing storms that occurred in summer, autumn equinox, winter and spring equinox, respectively. The percentage TEC deviation with respect to reference values differs substantially from season to season. A strong seasonal anomaly and clear equinoctial asymmetry in TEC response to the storms were observed. Weak and short-lived positive TEC deviations as well as strong and long-lasting negative trends were observed in summer storm during the main and recovery phases respectively over the high and low latitudes whereas in winter storm, the highest positive TEC deviations was recorded during the main phase over the entire latitudes. TEC enhancement dominated all the stations during the autumn (March) equinox storm while TEC depletion was majorly observed during the spring (September) equinox. All these variations find their explanations in the thermospheric composition change and circulation. Future work with direct or modeled measurement of atomic Oxygen to molecular Nitrogen ratio (O/N₂), large number of storms and other possible factors such as variations in storm’s intensity and local time dependence of the storm onset is expected to validate the observations in this study.     

Real-time zenith tropospheric delays in support of numerical weather prediction applications

The Geodetic Observatory Pecný (GOP) routinely estimates near real-time zenith total delays (ZTD) from GPS permanent stations for assimilation in numerical weather prediction (NWP) models more than 12 years. Besides European regional, global and GPS and GLONASS solutions, we have recently developed real-time estimates aimed at supporting NWP nowcasting or severe weather event monitoring. While all previous solutions are based on data batch processing in a network mode, the real-time solution exploits real-time global orbits and clocks from the International GNSS Service (IGS) and Precise Point Positioning (PPP) processing strategy. New application G-Nut/Tefnut has been developed and real-time ZTDs have been continuously processed in the nine-month demonstration campaign (February–October, 2013) for selected 36 European and global stations. Resulting ZTDs can be characterized by mean standard deviations of 6–10 mm, but still remaining large biases up to 20 mm due to missing precise models in the software. These results fulfilled threshold requirements for the operational NWP nowcasting (i.e. 30 mm in ZTD). Since remaining ZTD biases can be effectively eliminated using the bias-reduction procedure prior to the assimilation, results are approaching the target requirements in terms of relative accuracy (i.e. 6 mm in ZTD). Real-time strategy and software are under the development and we foresee further improvements in reducing biases and in optimizing the accuracy within required timeliness. The real-time products from the International GNSS Service were found accurate and stable for supporting PPP-based tropospheric estimates for the NWP nowcasting.     

放宽静稳定度飞机时间延迟稳定边界

针对飞机初步设计阶段其放宽静稳定度（RSS）与电传飞控系统时间延迟边界之间的定量关系求解问题，以战斗机纵向短周期方程为基础，分析了飞控系统中的时间延迟因素，描述了放宽静稳定度与方程参数间的关系。并以等效输入延迟的形式构建了含飞控系统时间延迟的闭环系统特征方程，通过根轨迹趋势理论和数值计算方法确定了放宽静稳定度与飞控系统时间延迟边界的定量数值关系，同时探讨了舵效与动导的参数不确定性对所求时间延迟边界的影响。本文方法对飞机初步设计阶段飞控系统时间延迟指标和可放宽静稳定度边界的确定具有一定的工程实践意义。     

月面无人自主采样返回任务动力下降点确定及验证

动力下降点确定是实施月面软着陆的重要环节，是多系统间复杂迭代的过程，涉及轨道设计、制导律设计、着陆目标的采样区确定、着陆及起飞安全分析。其设计结果直接影响了最终着陆点的位置和着陆过程的着陆安全，也间接影响采样安全和采样工程目标的实现结果。针对嫦娥五号在实施月面软着陆前确定动力下降点的任务需求，提出了通过多次轨道控制与最优标称制导轨迹搜索联合控制策略的动力下降点确定方法。首先，根据月面无人自主采样返回任务设计总结了动力下降点确定原理和约束条件；然后，详细论述了月面无人自主采样返回任务软着陆过程动力下降点确定方法；最后，通过嫦娥五号在着陆前主要的几次轨控实施结果分析了其对动力下降点的影响，同时综合了着陆区地形分析及着陆、起飞安全性分析，对动力下降点进行确定并根据最终在轨飞行结果进行验证。验证结果表明，基于“逐次逼近寻优方法”的月面软着陆环节动力下降点的确定方法有效，可以为后续地外天体软着陆等任务提供参考和借鉴。