采样计算测量中的采样条件及混迭引起的测量误差的研究

分析了信号参数的测量与信号恢复的区别,讨论了用采样计算方法测量周期重复信号时的采样条件,定量地研究了采样不满足采样条件时,混迭引起的测量误差的大小及其性质,并给出了减小误差的均匀内插采样和随机采样方法。     

机载目标状态估计器

研究基于空载雷达测量下的机动目标状态估计器的设计问题。通过建立直角坐标状态方程和选取一种伪测量量，并采用测量模型线性化的方法，建立起了估计器的基本结构，在此基础上增加距离通道的冗余滤波，进一步提高距离通道的估计精度，最后将估计器联入整个综合火力／飞行控制系统中，进行了Ｍｏｎｔｅ Ｃａｒｌｏ仿真，仿真结果表明，设计的目标状态估计器具有很好的跟踪估计性能。     

短波信道多普勒扩展仿真与实现

针对直接FIR滤波和多级内插滤波生成衰落因子的算法中存在算法复杂度高、计算效率低、存储空间大等问题,文章研究了一种多级迭代滤波的算法,以降低算法复杂度和减少存储空间,实时生成衰落因子;并进行了算法的复杂度分析和仿真实现,验证了算法的有效性.     

简化七阶CQKF及其在SINS大失准角初始对准中的应用

针对捷联惯性导航系统（SINS）大失准角初始对准的滤波过程，提出简化七阶正交容积卡尔曼滤波算法（7th-SCQKF）。根据简化容积卡尔曼滤波(CKF)理论，推导出改进的简化七阶CKF算法（7th-MSSRCKF），改进了原简化七阶CKF（7th-SSRCKF）的性能；同时，在7th-SSRCKF和7th-MSSRCKF基础上，引入正交半径准则，提出简化七阶CQKF（7th-SCQKF）算法，提高了滤波精度；并将简化七阶CQKF（7th-SCQKF）算法应用到SINS的大失准角初始对准仿真中，结果表明，7th-SCQKF比7th-MSSRCKF的滤波精度高，验证了新算法的正确性和有效性。     

低成本IMU／GPS组合导航系统研究

ＧＰＳ／ＩＮＳ组合导航系统已在一定领域得到应用，而ＩＮＳ昂贵的价格限制了它的广泛应用，本文采用低成本惯性测量组件（ＩＭＵ）设计了低成本ＩＭＵ／ＧＰＳ组合系统的硬件和相应的软件，进行了静态实验和数据处理，系统的俯仰角和横滚角误差均小于０．２°，实验结果表明，低成本组合系统的性能较好，而其性能价格比更高。     

A Self-organizing Bearings-only Target Tracking Algorithm in Wireless Sensor Network

In the bearings-only target tracking, wireless sensor network (WSN) collects observations of the target direction at various nodes and uses an adaptive filter to combine them for target tracking. An efficient network management is necessary to gain an optimal tradeoff between locating accuracy and energy consumption. This article proposes a self-organizing target tracking algorithm to select the most beneficial subset of nodes to track the target at every snapshot. Compared with traditional methods, this scheme avoids the need for keeping global position information of the network as in greedy selection. Each node judges its future usefulness depending on the knowledge of its own position and using simple mathematics computation. Simulations indicate that this scheme has locating accuracy comparable to the global greedy algorithm. Also, it has good robustness against node failure and autonomous adaptability to the change of the network scale. Furthermore, this algorithm consumes limited energy because only a portion of nodes partakes in the selection at every snapshot.     

INVESTIGATION OF TIGHTLY COUPLED SINS/GPS INTEGRATION MIDCOURSE GUIDANCE FOR AIR-TO-AIR MISSILES

ＩＮＶＥＳＴＩＧＡＴＩＯＮＯＦＴＩＧＨＴＬＹＣＯＵＰＬＥＤＳＩＮＳ／ＧＰＳＩＮＴＥＧＲＡＴＩＯＮＭＩＤＣＯＵＲＳＥＧＵＩＤＡＮＣＥＦＯＲＡＩＲ┐ＴＯ┐ＡＩＲＭＩＳＳＩＬＥＳＦｕＬｉ（富立），ＦａｎＹａｏｚｕ（范耀祖），ＮｉｎｇＷｅｎｒｕ（宁文如）（Ｆ...     

基于比例阀控制的液压附件部件综合试验台的设计

针对某飞机液压系统对液压附件、部件的测试要求,设计了多支路液压系统综合试验台,实现了对飞机液压系统中作动器的动作时间、次数和速度等参数测试,对液压缸、阀、集成块等附件在不同压力、流量和温度等条件下的性能测试。该设计主要采用比例阀控制压力和流量,多级过滤器进行油源净化,PLC和继电器实现测控、电位计进行压力和流量调节,数显表直接显示压力、流量和温度、时间等参数。通过实际测试验证,试验台工作稳定、安全可靠、调整方便、显示直观、振动噪音小、不泄露,满足了某型号飞机液压附件部件测试的要求。     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.     

月面无人自主采样返回任务动力下降点确定及验证

动力下降点确定是实施月面软着陆的重要环节，是多系统间复杂迭代的过程，涉及轨道设计、制导律设计、着陆目标的采样区确定、着陆及起飞安全分析。其设计结果直接影响了最终着陆点的位置和着陆过程的着陆安全，也间接影响采样安全和采样工程目标的实现结果。针对嫦娥五号在实施月面软着陆前确定动力下降点的任务需求，提出了通过多次轨道控制与最优标称制导轨迹搜索联合控制策略的动力下降点确定方法。首先，根据月面无人自主采样返回任务设计总结了动力下降点确定原理和约束条件；然后，详细论述了月面无人自主采样返回任务软着陆过程动力下降点确定方法；最后，通过嫦娥五号在着陆前主要的几次轨控实施结果分析了其对动力下降点的影响，同时综合了着陆区地形分析及着陆、起飞安全性分析，对动力下降点进行确定并根据最终在轨飞行结果进行验证。验证结果表明，基于“逐次逼近寻优方法”的月面软着陆环节动力下降点的确定方法有效，可以为后续地外天体软着陆等任务提供参考和借鉴。