Nanofillers modification of Epocast 50-A1/946 epoxy for bonded joints

Epocast 50-A1/946 epoxy was primarily developed for joining and repairing of composite aircraft structural components. The objective of the present work is to modify the Epocast epoxy resin by different nanofillers infusion. The used nanofillers include multi-walled carbon nanotubes（MWCNTs）, SiC and Al2O3 nanoparticles. The nanofillers with different weight percentages are ultrasonically dispersed in the epoxy resin. The sonication time and amplitude for MWCNTs are reduced compared to Al2O3 and SiC nanoparticles to avoid the damage of MWCNTs during sonication processes. The fabricated neat epoxy and twelve nanocomposite panels were characterized via standard tension and in-plane shear tests. The experimental results show that the nanocomposites materials with 0.5wt% MWCNTs, 1.5wt% SiC and 1.5wt% Al2O3 nanoparticles have the highest improvement in the tensile properties compared to the other nanofiller loading percentages.The improvements in the shear properties of these nanocomposite materials were respectively equal to 5.5%, 4.9%, and 6.3% for shear strengths, and 10.3%, 16.0%, and 8.1% for shear moduli. The optimum nanofiller loading percentages will be used in the following papers concerning their effect on the bonded joints/repairs of carbon fiber reinforced composites.     

谐振板式大型试件冲击谱模拟技术研究

通过对试验室现有谐振板冲击模拟装置的研究和分析,采用在谐振板的一端增加千斤顶的方法,设计出了较大试件的谐振板冲击谱模拟装置,并对该装置进行了一系列的研究和分析。文章利用一个夹具和配重共117kg的试件,对该装置进行试验调试,得出了两种满足常用冲击谱试验条件的结果。经研究表明,这种装置可用于150kg以下的大型试件的冲击谱模拟试验,具有一定的工程实用价值。     

核热推进地面试验技术研究

核热推进具有比冲高、推力大等特点,在载人深空探测和星际货运任务上具有广阔应用前景。核热推进技术的研发需要进行大量地面试验。首先回顾了美国与俄罗斯的核热推进地面试验技术的发展,对地面试验技术进行分类总结。然后基于一种小型核火箭方案,研究了燃料元件非核试验、燃料元件辐照考验试验和带核整机地面试验等关键地面试验技术,并提出了初步试验方案。最后对我国核热推进地面试验的发展提出了一些建议。     

Angles-only relative orbit determination in low earth orbit

The paper provides an overview of the angles-only relative orbit determination activities conducted to support the Autonomous Vision Approach Navigation and Target Identification (AVANTI) experiment. This in-orbit endeavor was carried out by the German Space Operations Center (DLR/GSOC) in autumn 2016 to demonstrate the capability to perform spaceborne autonomous close-proximity operations using solely line-of-sight measurements. The images collected onboard have been reprocessed by an independent on-ground facility for precise relative orbit determination, which served as ultimate instance to monitor the formation safety and to characterize the onboard navigation and control performances. During two months, several rendezvous have been executed, generating a valuable collection of images taken at distances ranging from 50?km to only 50?m. Despite challenging experimental conditions characterized by a poor visibility and strong orbit perturbations, angles-only relative positioning products could be continuously derived throughout the whole experiment timeline, promising accuracy at the meter level during the close approaches. The results presented in the paper are complemented with former angles-only experience gained with the PRISMA satellites to better highlight the specificities induced by different orbits and satellite designs.     

南航2m直径旋翼模型试验装置的测量系统

本文简单介绍了南航２ｍ直径旋翼模型试验装置测量系统的５个测量分系统，及其设备配置、使用功能和测量精度。该装置的两个关键测量分系统是天平测量系统及旋翼桨叶应变测量系统。本文重点介绍了为提高这两个分系统的测量精度及减小测量误差，在天平设计、桨叶应变片粘贴、集流环性能、信号传输等方面所采取的方法及措施。     

低速壁压信息洞壁干扰修正方法两个重要的新改进

本文介绍了对美国洛克希德公司Hackett,J.E.等人研究的壁压信息洞壁干扰修正方法两个重要的新改进。建立了一个简便方法,消除了原方法必须要在模型下游测到壁压的渐近分布,才能进行准确修正的苛刻条件;建立了一个测压试验洞壁干扰的改进修正方法,使测压与测力试验的修正方法一致。文中给出了两组模型的验证结果。本文的两个新改进,消除了壁压信息法应用中的突出难关,不仅拓宽了应用,并大为提高了测力、测压试验洞壁干扰修正的准确性。     

全模颤振双索悬挂系统刚体模态频率研究

研究绳系结构和绳索预紧力对全模颤振双索悬挂系统刚体模态频率的影响。首先，基于绳索并联机构理论，对双索悬挂系统进行静力学建模，引入加权矩阵，推导了双索悬挂系统静刚度模型；其次，建立双索悬挂系统无阻尼振荡方程，分析双索悬挂系统刚体模态频率变化规律；进而，搭建了双索悬挂系统地面样机，开展系统模态频率测试试验，研究系统刚体模态频率的影响因素及其变化规律；最后，参考试验结果修正所建数学模型。结果表明，随着绳索预紧力的增加，系统刚体模态频率呈上升趋势，但各阶刚体模态的固有频率上升速率不同，平动模态的固有频率受绳索预紧力影响比转动模态小得多；在转动模态方面，滚转模态的固有频率最大且上升快；在平动模态方面，升沉模态的固有频率大于横侧滑模态的固有频率；双索经过的机身前后滑轮与飞机模型质心之间的相对位置变化会不同程度地影响支撑系统俯仰模态、偏航模态的固有频率，但几乎不影响其滚转模态的固有频率。研究发现，通过控制悬挂绳索预紧力的大小，合理设计机身上的滑轮安装位置，能够有效降低双索悬挂系统刚体模态频率。研究结果对于优化设计全模颤振双索悬挂系统具有指导意义。     

交变应力下冷胀孔边残余应力衰减规律的有损检测试验研究

对高胀孔量下的ＬＹ１２ＣＺ板件孔边残余应力在交变应力作用下衰减规律的有损多试件普通莫尔密栅云纹检测方法进行了尝试,给出了一定载荷范围内残余应力的衰减规律,揭示了高胀孔量下残余应力的再分布现象。研究表明,本文所使用的多试件有损检测方法,不但经济可行,而且有足够精度,应用前景十分广阔。     

利用前缘旋转控制边条翼外翼分离

边条翼在边条较小时中等迎角以上外翼就会出现分离,现提出用转动前缘表面来控制边条翼外翼分离。通过测力、油流和烟丝实验研究了转动前缘对机翼气动特性的影响。结果表明,在这种机翼上转动前缘对控制分离是有效的,升力增量最大可达３０％。可以预期,转动前缘与边条的综合作用,机翼的分离特性将有较大的改善     

单晶叶片材料蠕变试验研究

针对单晶材料涡轮叶片的蠕变计算分析的需要,对我国自行设计的单晶材料DD3进行蠕变试验,根据试验结果提出了进行曲线拟合的方法,并与有限元法计算相结合,对拟合出的蠕变律常数进行了修正,提出了较好符合试验曲线的较精确的Norton蠕变律有关常数A、n和p值,满足了单晶叶片非线性有限元蠕变分析的要求.