基于室内无线模型的穿墙损耗校正

K-M（Keenan-Motley）模型将单墙固定损耗值相加来计算室内无线信号穿透多墙的总损耗值,存在较大误差。针对该问题选取多种室内场景分别进行连续波（Continuous Wave,CW）测试,对无线信号穿墙损耗的影响因素和变化规律进行分析,提出了一种基于人工神经网络的室内无线模型穿墙损耗校正方法,对预处理后的测试数据进行训练并建立预测模型。经验证该预测模型符合校正判别准则,在实际场景下具有良好的预测准确度。     

发动机数控系统智能容错技术的半物理仿真研究

提出基于自联想神经网络的发动机数控系统的智能容错技术。该方法不依赖系统模型,只需要发动机的测量值来离线训练网络。若发生性能蜕化,该方法能自动切入故障诊断与最优估计的综合逻辑。文中开展了半物理仿真实验,实验结果充分证明了该技术能适应实验现场多变的环境,能正确诊断发动机传感器故障并提供解析余度,具有较好的鲁棒性。     

从摄动理论看洞壁干扰的总体型修正

利用Ｄ．Ｎｉｘｏｎ跨声速摄动理论对目前奉行的洞壁干扰总体型修正提出了质疑;讨论了结果从理论上进一步支持了洞壁干扰的当地型修正战略。     

文献《Validation of commercial fiber optic components for aerospace environments》点评

文章是对一篇SPIE会议文献《用于太空环境的商业光纤器件地面验证方法》的点评。介绍了商业光纤部件从市场采购到准备作为太空飞行部件使用前,在空间环境作用（包括真空、热、振动、辐射）下的地面工艺性合格鉴定试验技术。这项技术由NASA哥达德空间飞行中心（GSFC）创立并命名为“工艺技术有效性保证法”,该项技术还包括如何建立商用光纤产品制造工艺性合格鉴定试验验收标准或准则方面的内容。“点评”还针对文献中3个实例之一“水星激光高度仪”试验件的热与振动环境试验规范、试验夹具等重要试验技术信息进行详细介绍。     

Influence of uniaxial tensile pre-strain on forming limit curve by using biaxial tensile test

This paper focused on the effect of pre-strain on forming limit curves(FLC) of 5754-O aluminum alloy sheet through utilizing biaxial tensile approach. Based on Swift model and Yld2000-2 d yield criterion, the dimensions of cruciform specimen was optimized through applying finite element method for increasing the strain at specimen center. After that, with the recommended specimen size, the cruciform specimen was tested under various stroke ratios to experimentally characterize the limit strains ...     

Experimental investigation on ice-breaking performance of a novel plasma striker

Aircraft icing has long been a plague to aviation for its serious threat to flight safety.Recently, researches about a newly proposed deicing method based on Plasma Synthetic Jet Actuator(PSJA) have just started. To meet the requirements of in-flight deicing, structure of PSJA needs to be adjusted. This paper completed the detailed design and experimental validation of a novel plasma striker, which was a modified version of PSJA. Influences of mass of the moving part and rod shapes on the ice-br...     

星载TDICCD随机振动与数据处理研究

对星载TDICCD进行了随机振动试验,提出了TDICCD机体在进行宽带随机振动工程试验中必定面临的几个技术问题及处理方法,分析了振动环境与结构振动特性的关系及其对TDICCD结构的影响和危害,研究了试验的实用技术和控制方式的选择要点.根据对星载TDICCD振动信号的现场采集结果,分析了振动信号的时域划分、信号采集基本参数的选择原则,并用信号分析仪进行了数据处理,获得了该机体振动的参数,这些动态特性参数为星载TDICCD的防振、隔振提供了可靠的参考,为对机体进行有限元模态计算提供了修正和科学依据.     

A hybrid original approach for prediction of the aerodynamic coe?cients of an ATR-42 scaled wing model

A new approach for the prediction of lift, drag, and moment coefficients is presented. This approach is based on the support vector machines (SVMs) methodology and an optimization meta-heuristic algorithm called extended great deluge (EGD). The novelty of this approach is the hybridization between the SVM and the EGD algorithm. The EGD is used to optimize the SVM parameters. The training and validation of this new identification approach is realized using the aerodynamic coefficients of an ATR-42 wing model. The aerodynamic coefficients data are obtained with the XFoil software and experimental tests using the Price–Pa?doussis wind tunnel. The predicted results with our approach are compared with those from the XFoil software and experimental results for different flight cases of angles of attack and Mach numbers. The main pur-pose of this methodology is to rapidly predict aircraft aerodynamic coefficients.     

电子封装铝基复合材料热循环曲线研究

研究了热循环对铝基复合材料热膨胀和冷却收缩曲线的影响。发现电子封装纤维增强铝基复合材料的热循环曲线是不封闭的。热循环曲线的形状、不封闭程度同增强体的种类、测试方向、热循环温度区间以及热循环次数等因素有关。利用细观力学理论较好地解释了这些现象。     

FL-1风洞绘图软件

本文介绍了用于 FL-1风洞实验的绘图软件结构、功能和操作。