Ansys在镀锌锅空间温度场分析中的应用

利用Ansys对镀锌锅上方空间的温度场进行模拟。在模拟过程中，利用Ansys软件中的FlotranCFD模块建立模型，计算锌锅上方空间的流场和温度场分布情况，分析温度的主要影响因素，为热镀锌生产线的工程设计提供了理论依据。此方法也为温度分析提供了一种新的思路。     

DBV-RCS中一种提高时延性能的时隙分配方法(英文)

在DVB-RCS卫星通信中,为某个业务分配的时隙在MF-TDMA帧中的位置分布将影响该业务的时延特性。本文分别针对固定速率和实时可变速率业务,对MF-TDMA的帧长度、终端分配的时隙数量及位置分布与业务时延性能之间的关系进行了建模分析。理论分析表明时隙位置是影响业务时延的一个重要因素,位置分布越均匀,越能提高业务的时延性能;时隙均匀分配相比传统的时隙连续分配可以有效降低业务平均时延,且时延不随帧长的变化而变化;在时隙均匀分配方式下,提高实时可变速率业务的带宽分配可以更有效的提高时延性能。在DVB-RCS标准基础上,提出了一种与标准完全兼容的时隙均匀分配方法(TUAM),通过计算机仿真验证了算法的有效性以及建模分析的正确性,该算法可有效地保证业务具有极低的平均时延和时延抖动,使得VoIP等实时业务不会由于端到端时延过大而丢包,提高了DVB-RCS系统对于实时业务QoS的保障能力。     

Real-time zenith tropospheric delays in support of numerical weather prediction applications

The Geodetic Observatory Pecný (GOP) routinely estimates near real-time zenith total delays (ZTD) from GPS permanent stations for assimilation in numerical weather prediction (NWP) models more than 12 years. Besides European regional, global and GPS and GLONASS solutions, we have recently developed real-time estimates aimed at supporting NWP nowcasting or severe weather event monitoring. While all previous solutions are based on data batch processing in a network mode, the real-time solution exploits real-time global orbits and clocks from the International GNSS Service (IGS) and Precise Point Positioning (PPP) processing strategy. New application G-Nut/Tefnut has been developed and real-time ZTDs have been continuously processed in the nine-month demonstration campaign (February–October, 2013) for selected 36 European and global stations. Resulting ZTDs can be characterized by mean standard deviations of 6–10 mm, but still remaining large biases up to 20 mm due to missing precise models in the software. These results fulfilled threshold requirements for the operational NWP nowcasting (i.e. 30 mm in ZTD). Since remaining ZTD biases can be effectively eliminated using the bias-reduction procedure prior to the assimilation, results are approaching the target requirements in terms of relative accuracy (i.e. 6 mm in ZTD). Real-time strategy and software are under the development and we foresee further improvements in reducing biases and in optimizing the accuracy within required timeliness. The real-time products from the International GNSS Service were found accurate and stable for supporting PPP-based tropospheric estimates for the NWP nowcasting.     

地面系留设施万向滑轮结构优化设计

基于系留缆绳换向及缆绳拉力和倾角的测量,提出了一种优化的机动式系留气球万向滑轮结构设计方案,描述了万向滑轮结构形式、材料选择及工艺实现等,采用三维建模及有限元分析相结合的方法,对万向滑轮结构进行校核分析。结果表明,该结构满足刚度和强度要求,具有较广泛的工程应用价值。     

放宽静稳定度飞机时间延迟稳定边界

针对飞机初步设计阶段其放宽静稳定度（RSS）与电传飞控系统时间延迟边界之间的定量关系求解问题，以战斗机纵向短周期方程为基础，分析了飞控系统中的时间延迟因素，描述了放宽静稳定度与方程参数间的关系。并以等效输入延迟的形式构建了含飞控系统时间延迟的闭环系统特征方程，通过根轨迹趋势理论和数值计算方法确定了放宽静稳定度与飞控系统时间延迟边界的定量数值关系，同时探讨了舵效与动导的参数不确定性对所求时间延迟边界的影响。本文方法对飞机初步设计阶段飞控系统时间延迟指标和可放宽静稳定度边界的确定具有一定的工程实践意义。     

Temperature effect on buckling properties of ultra-thin-walled lenticular collapsible composite tube subjected to axial compression

This paper seeks to outline the temperature effect on the buckling properties of ultra-thin-walled lenticular collapsible composite tube(LCCT) subjected to axial compression.The buckling tests of the LCCT specimens subjected to axial compression were carried out on INSTRON-500 N servo-hydraulic machine in dry state and at the temperatures of 25 C, 100 C and 80 C. The load–displacement curves and buckling initiation loads were measured and the buckling initiation mechanism was discussed from experimental observations. Experiments show that the buckling initiation load, on average, is only about 2.2% greater at the low temperature of 80 C than at the room temperature of 25 C due to the material hardening, demonstrating an insignificant increase in the buckling initiation load, whereas it is about 19.5% lower at the high temperature of 100 C than at the room temperature owing to the material softening, implying a significant decrease in the buckling initiation load. The failure mode of the LCCT in axial compression tests at three different temperatures can be reckoned to be characteristic of the buckling initiation and propagation around the central region until rupture. The finite element(FE) model is presented to simulate the buckling initiation mechanism based on the eigenvalue-based methodology. Good correlation between experimental and numerical results is achieved.     

发动机高模试验技术研究

基于ANSYS软件平台,建立了发动机高模试验系统传动轴强度和疲劳数值仿真模型,并进行了数值仿真与分析计算,研究了传动轴强度和疲劳与位移之间的关系,得出了传动轴设计准则.通过对发动机高模试验系统扩压器与氮气破空设备的研究、分析与计算,得出了储能气缸和氮气破空环管的设计准则.采用该设计准则设计的发动机高模试验系统解决了发动机试验启动过程压力过高、回火严重、发动机喷管变形等问题,试验系统满足发动机设计对高模试验的要求.通过该试验系统考核的发动机已成功应用于发射卫星的运载火箭系统.     

临时航线运行效果评估研究

依托2012—2015年福建空管分局进近情况及福州长乐国际机场航班延误情况，由专家及一线管制员为各因素不同延误等级所占比重进行打分，建立延误等级模型，再通过打分情况建立物元评估模型，得出关联隶属度评估机场综合延误程度，以及使用临时航线前后延误程度的变化，最后，得到了福州长乐机场延误影响因素及综合延误程度的定性定量分析结果。     

欧拉方程多段翼型绕流计算的嵌套网格方法

本文采用嵌合体埋入技术，将主段翼型和襟翼分成两子域，对多段翼型的复杂构型进行了分区迭代求解，在有限体体积离散的基础上，求解欧拉方程计算各子域流场的解，通过各流场的耦合迭代到多段翼型绕流的解，典型的带３０％襟翼ＧＡ（Ｗ）－１翼型算例表明，该计算方法稳定，能较地模拟多段翼型中主段翼型与襟翼交接处的复杂流动现象计算结果与实验值有较好的一致性。