基于IPTA数据的毫秒脉冲星综合稳定度评估

利用脉冲星极其稳定的自转频率可以形成一种天文时间基准，部分毫秒级脉冲星的稳定度甚至超越了原子钟，但其观测稳定度易受多种噪声源的影响。一般来说，不同的脉冲星的噪声大部分是相互独立的，因此可以通过加权综合和滤波算法构建综合脉冲星时，有效去除计时残差中的噪声。针对此问题，采用10颗毫秒级脉冲星的国际脉冲星计时阵列（international pulsar timing array, IPTA）数据进行了稳定度评估分析，其中7颗脉冲星的观测数据长度在10年以上。综合考虑单颗脉冲星稳定度评估的结果和观测数据的长度后，筛选出了4颗脉冲星用于构建综合脉冲星时。同时对比了经典加权算法、小波分解算法和维纳滤波算法的综合脉冲星时稳定度结果。结果表明：脉冲星的长期稳定度优于短期稳定度，2颗脉冲星在1年处稳定度达10-15量级，8颗在1 000天处也达到了10-15量级，其中PSR J1600-3053在5年处稳定度达到了最佳，为7.023×10-16 。此外，三种算法中，维纳滤波建立的综合脉冲星时稳定度最佳，在5年处达到了1.502×10-15，优于参与构建的其他所有脉冲星的5年稳定度。     

火星探测器气动外形/弹道一体化多目标优化

针对火星探测器概念设计阶段的需求,提出了融合气动外形、弹道和开伞条件的一体化多目标优化设计方法。首先建立了火星探测器进入段三自由度弹道运动方程,基于修正牛顿理论推导了适用于具有较大半锥角球锥外形的气动参数估算模型,采用Sutton-Graves公式计算了驻点热流密度。以开伞高度、总吸热量和容积率为目标函数建立了火星探测器气动外形/弹道一体化多目标优化模型,采用基于分解的多目标进化算法(MOEA/D)进行求解计算并与参考设计进行了对比。数值结果表明:多目标优化方法提供多个三目标均优于参考设计的Pareto最优解,为火星探测器的概念设计提供了一定的参考依据。     

多变量气动设计问题分层协同优化

 通过验证实例分析,气动设计中精细化优化模型对设计结果收敛精度的提高有很大帮助,但同时也带来优化算法搜索困难的问题,并且由于不同类型设计变量之间的相互耦合干扰使优化难以收敛到全局最优解。于是提出基于响应均值灵敏度的概念对大规模的设计变量进行重要性分组的策略,依据设计变量分组情况应用系统分解思想对多变量设计问题进行分层协同优化来降低系统的复杂度,这既保证了精细化设计的要求,又缓解了优化算法对大规模问题搜索困难的问题。与传统气动优化方法相比,基于系统分解的分层协同优化算例有较大寻优效率和性能提升,证明了该方法的可行性。     

Novel passive localization algorithm based on double side matrix-restricted total least squares

In order to solve the bearings-only passive localization problem in the presence of erroneous observer position, a novel algorithm based on double side matrix-restricted total least squares (DSMRTLS) is proposed. First, the aforementioned passive localization problem is transferred to the DSMRTLS problem by deriving a multiplicative structure for both the observation matrix and the observation vector. Second, the corresponding optimization problem of the DSMRTLS problem without constraint is derived, which can be approximated as the generalized Rayleigh quotient minimization problem. Then, the localization solution which is globally optimal and asymptotically unbiased can be got by generalized eigenvalue decomposition. Simulation results verify the rationality of the approximation and the good performance of the proposed algorithm compared with several typical algorithms.     

Monitoring of rice cropping intensity in the upper Mekong Delta,Vietnam using time-series MODIS data

Information on rice growing areas is important for policymakers to devise agricultural plans. This research explores the monitoring of rice cropping intensity in the upper Mekong Delta, Vietnam (from 2001 to 2007) using time-series MODIS NDVI 250-m data. Data processing includes three steps: (1) noise is filtered from the time-series NDVI data using empirical mode decomposition (EMD); (2) endmembers are extracted from the filtered time-series data and trained in a linear mixture model (LMM) for classification of rice cropping systems; and (3) classification results are verified by comparing them with the ground-truth and statistical data. The results indicate that EMD is a good filter for noise removal from the time-series data. The classification results confirm the validity of LMM, giving an overall accuracy of 90.1% and a Kappa coefficient of 0.7. The lowest producer and user accuracies were associated with single crop rain-fed rice class due to the mixed pixel problems. A strong yearly correlation at the district level was revealed in the MODIS-derived areas (R² ? 0.9). Investigation of interannual changes in rice cropping intensity from 2001 to 2007 showed a remarkable conversion from double to triple crop irrigated rice from 2001 to 2003, especially in the Thoai Son and Phu Tan districts. A big conversion from triple crop rice back to double crop rice cultivation was also observed in Phu Tan from 2005 to 2006. These changes were verified by visual interpretation of Landsat images and examination of NDVI profiles.     

Space object material identification method of hyperspectral imaging based on Tucker decomposition

Space object material identification method based on Tucker decomposition is proposed and demonstrated experimentally. Space target generally has a low spatial resolution because of the limitation in detection distance. Hyperspectral imaging (HSI) technology can capture the image from visible light to shortwave infrared continuously while providing the spatial and spectral information of the target, thereby introducing a new space target detection and identification approach. However, the data obtained by the HSI system often contain mixed pixels, thereby causing difficulties in target material identification. In this work, a material identification method of hyperspectral data based on Tucker decomposition is proposed by combining mixed spectral theory with tensor decomposition. The feasibility of the method is verified by using satellite model hyperspectral data with different spatial resolutions compared with the endmember obtained from the non-negative matrix decomposition (NMF), independent component analysis (ICA), tensor singular value decomposition (t-SVD). The average CORR of NMF, ICA, t-SVD and the proposed method is 0.2694, 0.5818, 0.6397 and 0.937, correspondingly. Therefore, the proposed method has demonstrated a more remarkable performance in terms of material identification, the analysis results of the material abundance distribution that used the proposed method.     

基于希尔伯特-黄变换的雷达数据误差修正处理技术

由于雷达跟踪测量数据总存在误差,而目前采用的误差处理算法修正效果并不理想,为了有效估计数据中的未知误差,提高数据处理的精度,提出了一种基于希尔伯特-黄算法的雷达误差残差诊断方法,利用得到的内蕴模态函数拟合出误差残差的特征,准确分离出设备的误差信息。通过对某雷达的实测数据分析证明该方法较其他方法对解决该类问题更为有效,且在事后高精度数据处理中具有较好的实用性。     

基于正交分解法的非平稳随机振动响应计算

为高效地获得非平稳随机振动响应的高精度结果,对过滤白噪声非平稳激励信号用精确积分法获得了 K L 分解的精确向量,并对其进行了分析。单自由度和多自由度仿真结果表明, 用较少量的K\|L向量即可满足精度的要求,尤其对峰值的把握较准确。在二自由度的非线性杜芬剪切系统中利用基于能量的等价线性化方法与正交展开方法进行迭代计算并与蒙特卡洛方法进行比较,仿真结果验证了方法的精确性。     

基于Pauli基分解的极化校准算法

极化校准是现代雷达精确获取目标极化散射特性的前提和基础。为解决某全极化雷达的校准问题,提出一种基于Pauli基分解的极化校准算法,给出了算法的正交条件和相关推导,可选择任意满足正交条件的三个目标做为定标体。对校准算法的误差来源和误差对校准结果的影响分别进行了理论分析和仿真分析。给出了不同条件下该校准算法和其它校准算法的仿真结果,以及某全极化雷达校准试验数据分析结果。结果表明：基于Pauli基分解的极化校准算法能有效消除天线的变极化效应,可更准确地校准目标的极化散射矩阵,并可应用于大型地基极化雷达、极化合成孔径雷达以及极化相控阵雷达等的极化校准。     

基于Laurent分解的星载AIS解调算法

为了适应星载AIS（船舶自动识别系统）条件,提出了一种基于Laurent分解的单通道星载AIS信号解调算法。AIS信号可通过Laurent原理分解成若干调幅脉冲信号,该算法用其中能量最大的2个调幅脉冲信号在接收前端作近似匹配滤波处理,然后采用维特比译码算法对信息码元进行还原。结合实际工程应用,对该算法在低信噪比和混叠信号2种条件下分别进行仿真。仿真结果表明,该算法在2种情况下正确解包率均显著优于传统算法。