扩展酉矩阵束算法实现稀疏可重构天线阵的优化设计

针对方向图可重构天线阵列的稀疏布阵问题,提出一种基于扩展酉矩阵束算法的优化设计算法。首先建立以阵元位置和多组激励为变量的多方向图联合稀疏优化模型,并利用期望方向图采样数据构建Hankel块矩阵。然后通过centro-Hermitian化处理和酉变换将采样矩阵从复数域转换到实数域,舍弃实矩阵中较小的奇异值对可重构线阵进行稀疏。最后通过对等价矩阵束的广义特征值分解估计稀布阵元位置,进而得到每个方向图对应的激励。仿真验证了该方法能够以阵元非均匀稀疏分布的阵列形式有效实现多个方向图的精确重构。     

Aerodynamic optimization of rotor airfoil based on multi-layer hierarchical constraint method

Rotor airfoil design is investigated in this paper. There are many difficulties for this high-dimensional multi-objective problem when traditional multi-objective optimization methods are used. Therefore, a multi-layer hierarchical constraint method is proposed by coupling principal component analysis (PCA) dimensionality reduction and e-constraint method to translate the orig-inal high-dimensional problem into a bi-objective problem. This paper selects the main design objectives by conducting PCA to the preliminary solution of original problem with consideration of the priority of design objectives. According to the e-constraint method, the design model is estab-lished by treating the two top-ranking design goals as objective and others as variable constraints. A series of bi-objective Pareto curves will be obtained by changing the variable constraints, and the favorable solution can be obtained by analyzing Pareto curve spectrum. This method is applied to the rotor airfoil design and makes great improvement in aerodynamic performance. It is shown that the method is convenient and efficient, beyond which, it facilitates decision-making of the high-dimensional multi-objective engineering problem.     

A new steering approach for VSCMGs with high precision

A new variable speed control moment gyro (VSCMG) steering law is proposed in order to achieve higher torque precision. The dynamics of VSCMGs is established, and two work modes are then designed according to command torque:control momentum gyro (CMG)/reaction wheel (RW) hybrid mode for the large torque case and RW single mode for the small. When working in the CMG/RW hybrid mode, the steering law deals with the gimbal dead-zone nonlinearity through compensation by RW sub-mode. This is in contrast to the conventional CMG singularity avoidance and wheel speed equalization, as well as the proof of definitely hyperbolic singular property of the CMG sub-mode. When working in the RW single mode, the motion of gimbals will be locked. Both the transition from CMG/RW hybrid mode to RW single mode and the reverse are studied. During the transition, wheel speed equalization and singularity avoidance of both the CMG and RW sub-modes are considered. A steering law for the RWs with locked gimbals is presented. It is shown by simulations that the VSCMGs with this new steering law could reach a better torque precision than the normal CMGs in the case of both large and small torques.     

某大型地效飞行器及其驮运巡航状态气动特性数值模拟

研究地效飞行器及其驮运负载飞行器巡航状态的气动特性,对大型地效飞行器的研发具有重要意义。采用求解N-S方程的有限体积法,分别针对地效飞行器巡航状态及其驮运负载飞行器巡航状态进行数值模拟分析。结果表明:综合考虑升阻比与阻力的大小,地效飞行器巡航状态机翼的最佳安装角为5.5°;综合考虑升阻比与巡航飞行的安全性、操纵性,地效飞行器巡航状态的最佳飞行高度为8 m;综合考虑巡航经济性以及从巡航状态过渡到分离状态的安全性与可靠性,两机驮运巡航状态下负载飞行器的最佳迎角为3°。     

多齿轮缘封严特性的实验

使用气体体积分数法得到了多齿轮缘封严的封严效率分布,获得封严效率随无量纲封严流量变化规律,最终拟合得出实验工况下的最小封严流量计算关联式（实验中主流雷诺数为1.42×105~3.20×105,旋转雷诺数为5.27×105~1.36×106）.通过对二氧化碳体积分数的测量结果表明:在盘腔内部高半径处封严效率较低,而低半径处封严效率一直处于较高的水平;封严效率随封严流量的变化与Owen封严效率方程有较好符合度,说明可以用封严效率方程对多齿轮缘封严进行预测,实验结果进一步扩展了其应用范围.      

命中精度Bayes推断中基于P值的验前可信度建模

在对散布参数验前可信度的定义与必要性进行分析的基础上,给出了给定散布参数（方差）的P值计算模型,构建了一维散布分析时验前分布可信度的P值模型,给出了验前P值与验前可信度的定义,并对其变动情况进行了阐述,给出了验前分布的拒绝条件.对二维散布分析条件下的验前可信度分析,分别构建了验前P值的独立求解模型和集成求解模型.并从0.05,0.2,0.4区分的数据区间,给出了验前分布选择的原则和要求.基于案例比较可见,验前可信度能较为显著地完成验前分布的差异化比较,相对现有的仅对验前可信度的定性说明,基于P值的验前可信度建模与计算,不仅能完成验前可信度的量化计算,而且能从概率的角度对验前分布选择的正确性进行假设检验.      

高空飞艇螺旋桨优化设计与气动性能车载试验

结合某高空飞艇螺旋桨的总体设计方案要求,完成螺旋桨的优化设计以及气动性能车载试验.采用叶素动量理论作为螺旋桨气动性能的计算方法,并通过风洞试验验证了该方法的可靠性.结合遗传算法对螺旋桨的弦长和扭转角进行了优化,使螺旋桨更加高效轻质,优化后螺旋桨设计点的气动效率增加了2.3%.建立螺旋桨车载试验测控系统,可以改变试验海拔高度和大气参数,得到优化设计螺旋桨不同工况的气动性能.试验结果表明,相同转速和来流条件下,海拔越高,螺旋桨的推力和扭矩越小.海拔为3-6km时,全尺寸高空飞艇螺旋桨计算推力和扭矩与试验结果的平均相对误差分别为2.8%和9.2%,两者基本吻合,从而验证了高空飞艇螺旋桨车载试验的准确性.      

球铰接杆式支撑臂构型参数分析

论述了球铰接杆式支撑臂的组成和主要构型参数。利用有限元分析软件建立了球铰接杆式支撑臂有限元模型,进行了模态分析并与试验结果进行了对比,验证了模型的正确性;分析了单元段跨距、套筒半径、横向框架边数和斜拉索预紧力对支撑臂性能的影响。结果表明单元段跨距的增加有利于支撑臂总体性能的提升,而套筒半径和横向框架边数的增加能提高支撑臂刚度但同时增加了系统总质量。斜拉索预紧力应从最小允许预紧力和球铰取得最大刚度值时对应的预紧力中选取较大值。分析结果为支撑臂的工程设计提供了依据。     

基于操纵面故障影响估计的安全飞行轨迹优化

操纵面故障将改变飞机受到的气动力和力矩,降低机动性能和控制能力,基于传统质点模型的航迹规划方法难以解决此类飞机安全飞行轨迹优化问题.因此,引入由故障引起的侧滑和侧力,估计故障后气动力系数,建立故障飞机模型;针对故障飞机控制和机动能力下降的问题,在原故障模型的基础上引入控制量变化率,构建轨迹优化对象模型,并将控制量变化率最小作为优化指标;采用高斯伪谱法优化计算安全飞行轨迹.仿真实验以副翼和方向舵故障为例进行设计,结果满足运动方程及各控制量、状态量约束,并能实现平稳飞行.     

Day-to-day variability of equatorial anomaly in GPS-TEC during low solar activity period

The ionospheric total electron content (TEC) in the northern hemispheric equatorial ionization anomaly (EIA) crest region is investigated by using dual-frequency signals of the Global Positioning System (GPS) acquired from Rajkot (Geog. Lat. 22.29°N, Geog. Long. 70.74°E; Geom. Lat. 14.21°N, Geom. Long. 144.90°E), India. The day-to-day variability of EIA characteristics is examined during low solar activity period (F10.7∼83 sfu). It is found that the daily maximum TEC at EIA crest exhibits a day-to-day and strong semi-annual variability. The seasonal anomaly and equinoctial asymmetry in TEC at EIA is found non-existent and weaker, respectively. We found a moderate and positive correlation of daily magnitude of crest, Ic with daily F10.7 and EUV fluxes with a correlation coefficient of 0.43 and 0.33, respectively indicating an existence of a short-term relation between TEC at EIA and the solar radiation even during low solar activity period. The correlation of daily Ic with Dst index is also moderate (r = −0.35), whereas no correlation is found with the daily Kp index (r = 0.14) respectively. We found that the magnitude of EIA crest is moderately correlated with solar flux in all seasons except winter where it is weakly related (0.27). The magnitude of EIA crest is also found highly related with EEJ strength in spring (r = 0.69) and summer (r = 0.65) than autumn (0.5) and winter (r = 0.47), though EEJ is stronger in autumn than spring.