空间任意形状凸面的轨道空间外热流计算方法

采用蒙特卡罗（ＭｏｎｔｅＣａｒｌｏ）方法，进行了平板、半球面、抛物面的地球反照角系数和地球红外角系数计算，通过与文献数据的比较，证明了由此方法所编程序的可靠性和实用性。利用这种方法，可以计算空间任意形状凸表面的轨道空间外热流。     

波音757-200型飞机风挡加温系统故障的排除与总结

通过对一起波音757—200型飞机风挡加温系统故障的排除．对该型飞机风挡加温系统的组成及工作原理进行介绍，为类似故障的排除提供了借鉴经验。     

自制等离子喷枪冷却系统的设计及测试

等离子喷枪是制备热障涂层中的研究重点。目前关于等离子喷枪的研究多集中于喷嘴(阳极)、阴极,鲜有关于喷枪冷却系统方面的研究;喷枪冷却系统的优劣直接影响喷枪的工作寿命和喷涂过程的稳定性,同时制备热障涂层的质量也与冷却效果紧密相关。本文利用三维模型,详细阐述了自制的喷枪冷却系统通道及工作原理,并对设计进行了理论计算,对自制的喷枪进行点火试验和喷涂测试,结果显示自制的喷枪冷却系统功能良好,喷枪工作稳定,涂层质量较好。     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

供热系统集约化运行的能耗监测及节能调节问题探讨

对我校供热系统的现状进行了分析；指出了锅炉热效率及能耗监控方面的不足，并针对锅炉热效率提高和二次网循环泵变频调节进行了节能分析计算；同时根据我校实际情况对循环泵设备配置及控制进行了分析，提出了要加强技术指标量化考核和能耗监测，提高效率、节能降耗，实现供热系统的科学化、集约化运行。     

低轨卫星月影事件预报优化

针对卫星月影问题,提出了一种低轨卫星优化的月影预报策略,可以有效提高目前低轨卫星在轨管理时对月影事件预报的效率.结合仿真对产生月影事件的太阳、地球、月球的三体关系进行了分析,首先给出了月影产生的解析分析方法,并通过对一个三维月影影响模型的分析,得到了月影影响区间的判定要素——月影临界角;然后进一步通过对月影临界角的分析,提出了基于太阳与白道面的位置关系和月影临界角对低轨卫星月影事件的优化预报方法;最后基于大量的随机低轨卫星场景对本方法的正确性进行了验证.研究结果表明,此方法能够较大地提高月影预报效率,可以将月影预报频率从每月1次降低到每年2次,从而简化了低轨卫星在轨运行管理的任务复杂度,为卫星的在轨可靠运行提供支持.     

基于格子Boltzmann方法表面形貌对微通道对流换热的影响

为推动微通道冷却技术在航空发动机中的应用,进一步提高航空发动机性能,本文通过扫描电子显微镜、粗糙度扫描仪等多方式扫描得到实际加工物体表面形貌,结合分形理论进行处理,得到真实、光滑、分形插值、康托尔集四类圆形截面管模型,管径100μm~400μm;采用格子Boltzmann方法进行数值模拟,首先通过与文献中实验结果的对比,验证了此方法的正确性,然后对空气在这四类圆形截面微通道中的对流换热特性进行了数值模拟,计算雷诺数Re范围80~640;结果发现：表面形貌是微通道中对流换热不可忽略的因素,相对粗糙度越大越有利于换热,真实扫描管的换热性能要比相同条件下光滑管高2.22%;分形理论可用于微通道表面形貌的构建,在相同迭代次数下,分形插值模型与真实扫描形貌换热性能相差0.03%,而康托尔集模型与真实扫描形貌换热性能相差1.88%,分形插值模型较康托尔集模型更能真实地反映实际形貌;微通道中,随着雷诺数的增加Nu将不再是常数,而是有增加的趋势。     

燃气轮机间冷器结构改进试验研究

为了分析间冷器翅片高度、翅片厚度、隔板厚度等结构参数对换热性能的影响,根据船用间冷循环燃气轮机长期工作在海洋环境的性能要求及结构特点,初步设计了机上间冷器,并对其进行了试验验证。根据前期验证结果,对间冷器结构进行了迭代改进。结果表明:在一定范围内,翅片高度增加导致换热效率降低和总压恢复系数增大;翅片厚度增加,导致换热效率提高和总压恢复系数减小;隔板厚度增加导致换热效率降低。     

0.3 m低温风洞液氮供给系统研制

基于系统级的一维热流体模拟分析,建立了适用于研究分析0.3 m低温风洞液氮供给系统的数学模型,并开展了系统漏热、两相流及缓冲罐中液氮容积等流体动力学分析;在系统现有控制策略及试验数据的基础上,基于该数学模型开展了系统压力动态响应分析,获得了在阀门动态调节过程中管网压力的瞬态响应,计算结果与试验值的总体误差控制在10%以内。喷射压力一致化改造避免了阀间干扰,添加的回流管道消除了供给末端的两相流现象,使喷射压力控制精度达到1.1%,调节时间减少到23 s,实现了风洞总温快速安全调节和精确控制。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.