Aerodynamic performance enhancement for flapping airfoils by co-flow jet

Introducing active flow control into the design of flapping wing is an effective way to enhance its aerodynamic performance. In this paper, a novel active flow control technology called Co-Flow Jet (CFJ) is applied to flapping airfoils. The effect of CFJ on aerodynamic performance of flapping airfoils at low Reynolds number is numerically investigated using Unsteady Reynolds Averaged Navier-Stokes (URANS) simulation with Spalart-Allmaras (SA) turbulence model. Numerical methods are validated by a NACA6415-based CFJ airfoil case and a S809 pitching airfoil case. Then NACA6415 baseline airfoil and NACA6415-based CFJ airfoil with jet-off and jet-on are simulated in flapping motion, with Reynolds number 70,000 and reduced frequency 0.2. As a result, CFJ airfoils with jet-on generally have better lift and thrust characteristics than baseline airfoils and jet-off airfoil when C_μ is greater than 0.04, which results from the CFJ effect of reducing flow separation by injecting high-energy fluid into boundary layer. Besides, typical kinematic and geometric parameters, including the reduced frequency and the positions of the suction and injection slot, are systematically studied to figure out their influence on aerodynamic performance of the CFJ airfoil. And a variable C_μ jet control strategy is proposed to further improve effective propulsive efficiency. Compared with using constant C_μ, an increase of effective propulsive efficiency by 22.6% has been achieved by using prescribed variable C_μ for NACA6415-based CFJ airfoil at frequency 0.2. This study may provide some guidance to performance enhancement for Flapping wing Micro Air Vehicles (FMAV).     

支线飞机综合飞行仿真平台设计

针对支线飞机机械操纵系统的特点,设计了由模块化的功能单元组成的综合飞行仿真平台,可以实现机械操纵系统数字仿真,在支线飞机的设计与制造中有着重要的应用价值,此平台通过改进还可用于支线飞机的试飞科目训练,从而降低试飞风险并缩短研制周期。     

机器人喷涂在F-35的应用

介绍了机器人飞机精整系统（RAFS）的硬件设计，阐述了优化喷涂参数和机器人程序以实现涂层厚度控制的过程，给出了使用RAFS在生产型飞机上实施喷涂的结果。     

直流电机网络控制系统仿真

对直流电机网络闭环控制系统进行仿真分析,根据电机网络闭环控制系统原理建立仿真模型。对具有数据丢包的直流电机网络伺服控制系统输出响应特性进行仿真,比较系统分别采用PI控制及增益,可调PI控制方式时的输出特性。结果表明,相比常规PI控制增益可调PI控制方法在网络环境下具有更好的控制特性。该研究为网络伺服控制技术提供可靠的参考依据。     

煤矿监测监控系统数据集成模式

从煤矿监测监控系统的实际出发,分析国内外煤矿监测监控系统的发展现状和局限性,论述用高新技术改造我国传统煤矿监测监控系统的可行性和必要性,然后从监测监控系统的结构角度,分析煤矿监控系统现阶段的发展主流和未来的发展趋势,并最终提出相应的信息数据集成技术方案。     

Transonic buffet control research with two types of shock control bump based on RAE2822 airfoil

Current research shows that the traditional shock control bump (SCB) can weaken the intensity of shock and better the transonic buffet performance.The author finds that when SCB is placed downstream of the shock,it can decrease the adverse pressure gradient.This may prevent the shock foot separation bubble to merge with the trailing edge separation and finally improve the buffet performance.Based on RAE2822 airfoil,two types of SCB are designed according to the two different mechanisms.By using Reynolds-averaged Navier-Stokes (RANS) and unsteady Reynolds-averaged Navier-Stokes (URANS) methods to analyze the properties of RAE2822 airfoil with and without SCB,the results show that the downstream SCB can better the buffet performance under a wide range of freestream Mach number and the steady aerodynamics characteristic is similar to that of RAE2822 airfoil.The traditional SCB can only weaken the intensity of the shock under the design condition.Under the off-design conditions,the SCB does not do much to or even worsen the buffet performance.Indeed,the use of backward bump can flatten the leeward side of the airfoil,and this is similar to the mechanism that supercritical airfoil can weaken the recompression of shock wave.     

基于线性规划的多操纵面重构控制研究

为实现多操纵面飞机的重构控制,提高飞机飞行的安全性能,提出了一种基于线性规划的多操纵面重构控制策略.针对操纵面卡死、松浮、损伤等典型故障情况,推导了相应的重构分配器,通过基于线性规划的直接分配方法来实现在操纵面故障下的重构控制.仿真结果表明,该控制策略能有效处理典型操纵面故障,发生故障时仍能快速跟踪控制指令,保证较好的...     

飞机附件的维修间隔决策

研究了飞机附件软时限的设定和管理方法,该方法可将附件的故障发生机率和运行风险控制在可接受水平,减少航空公司因机务原因的延误,提高飞机可利用率。     

双框架飞机蒙皮检测机器人切换运动控制方法

针对一种双框架飞机蒙皮检测机器人,通过分析该机器人在飞机表面上的受力情况,在飞机表面该机器人受到了非完整约束,基于牛顿-欧拉法建立了机器人非完整约束动力学模型。根据机器人机械结构和运动步态分析,将该非完整机器人系统分为子系统A和子系统B。为了实现机器人在飞机表面运动,采用反演技术和快速Terminal滑模控制相结合的思想对系统设计了控制器,提出了一种反演-滑模控制方法;对于非完整机器人子系统A和子系统B,设计了一种基于事件驱动的切换策略,实现了机器人对期望轨迹的全局渐近跟踪,并利用Lyapunov稳定性证明系统的跟踪误差收敛。仿真和试验表明,采用该切换策略和反演-滑模控制方法,双框架飞机蒙皮检测机器人可以在飞机表面自由运动并进行损伤检测,具有良好的可靠性和稳定性。     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.