基于滑模干扰观测器的高超声速飞行器滑模控制

首先,针对存在外部干扰和输入饱和的通用式高超声速飞行器的纵向动态模型,提出一种基于滑模干扰观测器的抗饱和滑模控制器。该滑模控制器采用非线性趋近律,在保证系统快速、稳定跟踪指令的同时,能够消除传统滑模控制中的抖振现象,并针对执行器饱和问题,加入抗饱和补偿器,以提高系统的稳定性。其次,对于系统中存在的干扰和不确定性,提出一种滑模干扰观测器,用以准确估计系统中存在的等效干扰,并将该观测器对干扰的估计值应用于滑模控制器中进行补偿,以消除干扰。再次,利用Lyapunov理论对所提出的基于滑模干扰观测器的抗饱和滑模控制器进行稳定性分析。最后,对高超声速飞行器的巡航状态进行仿真。仿真结果表明,所提方法能够有效提高系统的稳定性和抗干扰性,具有一定的实际应用价值。     

内装式空射运载火箭重力出舱机箭耦合动力学分析

研究了以运输机为平台的内装式运载火箭空射过程载机和火箭的耦合动力学建模。建模针对两个阶段：第一阶段,火箭固定于载机机舱内,两者构成一个整体,按照普通刚体的力学方法处理;第二阶段,火箭解锁后,沿着舱内的发射筒向外滑行,载机和火箭形成两刚体相互作用的耦合系统,基于牛顿-欧拉法建立系统动力学模型。载机在空射火箭过程中,油门和升降舵满偏,在加速前飞的同时拉大姿态俯仰角,火箭在自身重力分量和惯性力的作用下,沿着机舱内的发射筒加速向外滑行,直至与载机分离。数值仿真分析了空射过程载机的重要力学参数的变化过程,验证了载机操控策略的可行性和安全性,可为未来中国空射运载火箭技术设计提供数据参考。     

基于指令力矩螺旋式搜索的SGCMG 奇异规避方法

针对航天器的控制力矩陀螺群框架构型奇异以及传统奇异规避方法在规避时存在的框架“锁死”问题,本文提出一种基于指令力矩进行螺旋式搜索的控制力矩陀螺奇异规避方法.该方法在鲁棒奇异逆操纵律和零运动操纵律的基础上,引入随奇异度量值自主调节的旋转角和随时间连续变化的旋转轴,让期望力矩通过搜索寻找出逃离奇异状态的方向,来实现奇异规避.仿真结果表明该方法具有良好的奇异规避特性,并能够克服常规奇异规避方法存在的框架“锁死”情况.     

Dynamics,stability, and control of a four-cable mount system for wind tunnel test

A four-cable mount system is proposed for full-model wind tunnel flutter tests, which may adjust the pitch and roll attitude of the aircraft scaled model and ensure that the model is not subjected to cable tension. The system provides sufficient support to simulate the free flight of the aircraft by applying appropriate spring stiffness and cable tensions. The proposed four-cable mount system is modeled based on Lagrange mechanics, and its dynamics equations consider aerodynamic effects. The singularity of the system and its bifurcation characteristics under flow conditions are analysed to determine the supercritical bifurcation phenomenon for different tension levels and distances from the front suspension point to the mass centre of the model. The mathematical expressions of the longitudinal flight stability of the cable mount system are derived by linearising the system dynamics equations using small perturbations. The influence of the cable tension, spring stiffness, suspension point position, and other factors on the flight stability of the aircraft are analysed. A feedforward control algorithm is proposed to minimize the total elastic potential energy of the system. The results show that the model is in the level flight state when the elastic potential energy of the four-cable mount system is minimized. A feedback control design method is proposed based on the Lyapunov stability theory to derive the closed-loop stability conditions. The system dynamics model that includes the aircraft rigid body model, flexible cables, pulleys, springs, aerodynamic model, and servo motor control is established using the flexible multibody dynamics method. A multibody dynamics solver and Simulink are used to simulate the attitude adjustment of the model in the wind tunnel and verify the supercritical bifurcation characteristics of the system and the effectiveness of the feedback and feedforward control.     

无人驾驶直升机发动机模糊自适应PID控制

针对某型无人驾驶直升机发动机控制的特点,提出恒量供油、恒速控制和总距前馈补偿控制的复合控制策略,在飞行控制计算机内建立发动机模糊自适应PID控制器,利用模糊规则和推理来在线调整PID参数,使发动机安全平滑启动,并在各种功率状态下保持输出轴转速恒定。经含实物仿真试验、地面试车、系留试验以及无人机整机试飞测试,所设计的发动机控制方案动态响应速度快,对总距变化等干扰的抑制作用强,能保证主旋翼在各种飞行状态下获得最佳的气动效率,改进无人直升机的飞行性能。      

Fully distributed time-varying formation tracking control for multiple quadrotor vehicles via finite-time convergent extended state observer

This paper investigates a time-varying anti-disturbance formation problem for a group of quadrotor aircrafts with time-varying uncertainties and a directed interaction topology. A novel Finite-Time Convergent Extended State Observer(FTCESO) based fully-distributed formation control scheme is proposed to enhance the disturbance rejection and the formation tracking performances for networked quadrotors. By adopting the hierarchical control strategy, the multiquadrotor system is separated into two ...     

重力仪散热装置的热仿真分析

随着移动平台重力测量精度的不断提高,对重力仪的温度控制提出了更高的要求。为了实现在不同温度环境下的高精度重力测量,本文设计了一种保温散热装置,为重力仪提供第一级温控。利用Fluent软件分别模拟了0℃,22℃和40℃环境温度下此装置内重力仪系统的温度场,并在此基础上,利用高低温箱完成该装置的温度性能实验,验证了此温控方案的可行性。     

ELECTRONIC CONTROL OF TURBINE POWER UNITS

ＥＬＥＣＴＲＯＮＩＣＣＯＮＴＲＯＬＯＦＴＵＲＢＩＮＥＰＯＷＥＲＵＮＩＴＳ￥ＷａｎｇＤａｏｂｏ（ＤｅｐａｒｔｍｅｎｔｏｆＳｃｉｅｎｃｅａｎｄＴｅｃｈｎｏｌｏｇｙ，ＮＵＡＡ２９ＹｕｄａｏＳｔｒｅｅｔ，Ｎａｎｊｉｎｇ２１００１６，Ｐ．Ｒ．Ｃｈｉｎａ）Ａｂｓ...     

重型燃气轮机高雷诺数CDA叶型转捩特性数值计算

为研究重型燃气轮机的压气机叶片在高雷诺数工况下的气动性能,基于Gamma-Theta转捩模型的雷诺时均方程对某可 控扩散叶型进行了数值计算。通过对比不控制马赫数与控制马赫数,分析高雷诺数对可控扩散叶型气动性能及转捩特性的影响。 结果表明：在不控制马赫数条件下,在零攻角时,雷诺数从7×10 5 增大为9×10 5 ,总压损失增加了约391.95%;在高雷诺数工况下随 着雷诺数的增大,叶片流动损失不断增大,叶片可用攻角范围减小,同时在叶片吸力面出现激波,干扰转捩的产生。在控制马赫数 条件下,当Ma=0.6时,在零攻角工况下,雷诺数从8.2×10 5 增大为1×10 7 ,总压损失减小了约38.98%,吸力面转捩起始点从4.78%弦 长处前移至1.11%弦长处;在高雷诺数工况下,叶片流动损失随着雷诺数的增大不断减小,吸力面转捩位置前移。     

控制策略对无轴承开关磁阻电机

分析了无轴承开关磁阻电机(BSRM)的3种负载控制策略(方波控制策略、最小磁势控制策略和平均悬浮力控制策略),以及每种策略下由悬浮力方程和转矩方程求解超前角和绕组电流的方法。由于控制对象和求解过程所引入约束条件的不同,即便相同负载状况时,3种控制策略求取的超前角和绕组电流结果也不同。利用瞬态有限元法获得了电机的动态磁密分布,并研究了3种控制策略下电机分别表现出的磁场特性。通过双频法分离铁损,分别计算了3种控制策略在不同转速时的电机涡流损耗和磁滞损耗,给出了电机铁心各部分损耗随转速变化的关系,由此得到了3种控制策略对铁心损耗的影响。