冲击响应谱（SRS）分析数字化方法探讨

本文介绍了求单自由度二阶系统冲击响应谱（ＳＲＳ）的几种常用的数字化分析方法：直接积分法；快速富氏变换（ＦＦＴ）法；递推法；数字滤波器方法；改进的数字滤波器方法。并比较了它们的优缺点。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

飞机座舱有机玻璃机械加工应力测量方法研究

 通过实验研究了有机玻璃由于机械加工所产生的双折射条纹的性质及其与机械加工应力的关系;建立了一种定量测定和无损检测平板有机玻璃和飞机座舱有机玻璃件机械加工应力的新方法:用光弹性仪可以测得与双折射有关的干涉条纹,则可确定加工应力。     

美陆军制导武器试验半实物仿真技术综述

主要综述美国陆军制导武器试验的仿真技术和设施，同时介绍仿真试验中使用的几种典型的目标景象投影技术，并说明了它们的应用范围和优缺点。最后介绍了当前制导武器试验仿真技术的发展趋势。     

TiFe0．86Cr0．1／NaM复合贮氢材料的合成与性质

 利用蒸汽相法制备沸石技术合成ＴｉＦｅ０．８６Ｃｒ０．１／ＮａＭ复合贮氢材料的各种条件,找到了较适宜的碱度ＳｉＯ＿２／Ａｌ＿２Ｏ＿３以及合金与沸石。研究了合成条件对贮氢容量的影响,结果表明,沸石为单一晶相合成粒度不低于７４μｍ为佳。同时,该材料亦表现出良好的抗Ｏ＿２、ＣＯ＿２中毒特性。     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

电流探头校准的测量不确定度分析

介绍了电流探头传输阻抗的校准原理,并对测量不确定度进行了详细的分析评定.     

发动机模糊控制器应用的实验研究

 研究了模糊控制器在航空发动机控制中的实验应用。给出了实验方案及有关部件的数学描述;提出了用模糊控制开关设计法设计模糊控制器的思路及相应的数学描述;对发动机转速数字控制系统进行了实验研究。结果表明 :模糊控制器设计简便,具有良好的非线性校正作用,控制性能指标优良。     

开关磁阻调速电动机的运行控制

 开关磁阻调速电动机（SRD）是由双凸极型磁阻电动机、功率逆变器、转子位置检测器、定子绕组电流检测器以及运行控制器等部件组成的系统。它可以看作是大步距角、带位置闭环控制的步进电机的一种发展。 SRD结构如图1（α）所示。为避免磁拉力,定、转子齿数均为偶数。在各定子齿上设有集中绕组,正对两齿上的绕组联成一相。考虑电机出力,结构合理及定子绕组供电频率等因素,一般采用定子齿数比转子齿数多2个的结构。图中是所研制的定子8齿、转子6齿的样机结构（简称为8/6结构）。图1（b）为功率逆变电路。其中C_s为直流电源,T₁～T₄为四相绕组主开关,D₁～D₄为相应的续流二极管。     

碳纤维作宿主的FeCl3-GIC的合成与结构表征

采用混合熔融盐法成功地合成了以PAN基高模量碳纤维作宿主，FeCl3作插层剂的石墨层间化合物，采用XRD技术对其层间结构进行了表征。结果表明，所得产物内部已经形成混阶的阶结构。通过SEM和TEM观察了其形貌和结构的变化，同时利用EDS测定了各元素的相对含量。