非结构动网格生成的弹簧-插值联合方法

 提出了基于弹簧法的两点改进,以解决边界发生大变形时的非结构网格变形问题。为了使边界运动引起的网格变形能更好地由边界传递到内部网格中,提出了一种新的基于Delaunay网格插值的弹簧倔强系数逐层改进方法。为了提高弹簧法的计算效率,引入背景网格和直接插值方法,提出了弹簧-插值法。弹簧-插值法首先生成计算域的背景网格(粗网格),然后由弹簧法求解边界运动引起的背景网格变形,最后利用变形后的背景网格直接插值得到计算网格的变形。算例结果表明：改进后的方法一方面有效地提高了动网格的变形能力和变形后的网格质量;另一方面通过降低弹簧法的求解规模,显著地提高了动网格的变形效率。     

变截面少片钢板弹簧模糊优化设计

首先应用模糊优化理论对变截面少片钢板弹簧进行分析，建立模糊优化数学模型，并求出问题的最优解。结果表明：模糊优化设计结果比普通优化设计结果更符合设计要求。     

核磁共振陀螺信号仿真及噪声分析

核磁共振陀螺具有体积小、精度高、功耗低等优势,有望成为下一代惯性导航系统的核心部件,目前正受到人们的广泛关注。比较全面的介绍了核磁共振陀螺的基本理论,在此基础上利用时间离散化方法推导并建立了能够充分考虑核磁共振陀螺系统动态特性的仿真模型。利用该模型研究分析了锁相环相位、磁场、温度以及探测光强在1×10-5均方根幅度下均匀白噪声对陀螺信号的影响,发现它们对角随机游走、零偏不稳定性影响依次减小,且都具有自身独特的频率响应特性。其中,锁相环相位噪声引起的角随机游走与零偏不稳定性分别为5.1985×102(°)/h1/2、3.4593×103(°)/h,而探测光强噪声引起的角随机游走与零偏不稳定性分别为3.1623×10-1(°)/h1/2、4.7603×10-1(°)/h。该研究对深入分析核磁共振陀螺动力学机理、寻找主要噪声来源、提高陀螺性能具有重要意义。     

带关节轴承的波纹管式功率分出轴模态计算方法

通过锤击法对带关节轴承的波纹管型功率分出轴进行了固有频率测试,对关节轴承结构采取一般静力学接触建模的方法,对功率分出轴进行了模态计算。通过对比,发现误差较大,这是由于ANSYS在进行非线性模态分析时忽略了关节轴承的刚度。提出采用弹簧单元来模拟关节轴承刚度特性的方法,通过计算发现,功率分出轴的固有频率直接与关节轴承刚度呈线性关系,当取弹簧单元的等效刚度为8.5×105N/m时,仿真计算结果与试验结果一致,说明该方法可以较好地模拟带关节轴承波纹管联轴器的模态特性。     

运动补偿用惯性器件误差对SAR成像分辨率的影响研究

 为提高合成孔径雷达（SAR）系统的性价比,必须根据SAR成像分辨率的要求和整体系统参数,设计相应精度的运动补偿用捷联惯导系统。在确定SAR运动补偿系统方案和安装方式的基础上,分析不同方向的加速度计和陀螺仪误差对天线相位中心位置测量误差的影响,并利用位置测量误差与SAR成像分辨率之间的关系,进一步明确了不同方向的加速度计和陀螺仪对SAR成像分辨率的影响。研究表明：基于SAR的工作原理和安装方式,x方向加速度计和y方向陀螺仪对SAR成像分辨率的影响明显比其他惯性器件严重;相同误差水平的惯性器件对SAR成像分辨率的影响随着合成孔径时间和工作波长的不同而不同,时间越长,波长越短,影响则越严重。SAR成像仿真证明了结论的正确性。研究结果对于研制高性价比SAR成像运动补偿系统有一定的理论指导意义。     

A Polynomial Prediction Filter Method for Estimating Multisensor Dynamically Varying Biases

The estimation of the sensor measurement biases in a multisensor system is vital for the sensor data fusion. A solution is provided for the estimation of dynamically varying multiple sensor biases without any knowledge of the dynamic bias model pa- rameters. It is shown that the sensor bias pseudomeasurement can be dynamically obtained via a parity vector. This is accom- plished by multiplying the sensor uncalibrated measurement equations by a projection matrix so that the measured variable is eliminated from the equations. Once the state equations of the dynamically varying sensor biases are modeled by a polynomial prediction filter, the dynamically varying multisensor biases can be obtained by Kalman filter. Simulation results validate that the proposed method can estimate the constant biases and dynamic biases of multisensors and outperforms the methods reported in literature.     

利用MATLAB优化设计少片变截面钢板弹簧

本文首先建立了少片变截面钢板弹簧优化设计模型,探讨了利用MATLAB进行最优解求解的可行性,并以某轻型货车前悬架为例,设计了少片变截面钢板弹簧,结果表明利用MATLAB优化设计少片变截面钢板弹簧计算简单易行,速度快,精度高。     

Analysis of the code and phase between-receiver inter-system biases of the overlapping frequencies for GPS/Galileo/BDS

The overlapping-frequency signals from different GNSS constellations are interoperable and can be integrated as one constellation in multi-GNSS positioning when inter-system bias (ISB) is properly disposed. The look-up table method for ISB calibration can enhance the model strength, maximize the number of integer-estimable ambiguities, and thus is preferred. However, the characteristics and magnitudes of the receiver code ISB and phase fractional ISB (F-ISB) are not well known and the wrong values of the biases can seriously degrade the positioning results. In this contribution, we first estimate the between-receiver code ISB and phase F-ISB of hundreds of the baselines up to around 25km in the European Permanent GNSS Network (EPN) and the Multi-GNSS Experiment (MGEX) for the overlapping frequencies L1-E1 (L1), L5-E5a (L5) and E5b-B2b (L7). The data collected from 1st January 2016 to 1st January 2019. Second, the receiver-type and firmware-version combinations for the receivers of Trimble, Leica, Javad, Septentrio and NovAtel are carefully classified. Results show that the Septentrio receivers have consistent code and phase ISB values for the three overlapping frequencies i.e. only one value for each frequency and no receivers are different. The Leica, Trimble and Javad receivers have two or more ISB values for at least one of the three frequencies. A few receivers with biases to the groups are also found and listed. Third, the code ISB and phase F-ISB of the groups are adjusted by the least-squares method. The root mean square errors (RMSE) of the least square adjustment are 0.240 m, 0.250 m and 0.200 m for code of L1, L5 and L7 frequencies, respectively, and are 0.0009 m, 0.0015 m and 0.0031 m for phase of L1, L5 and L7 frequencies, respectively. Finally, the effects of code ISB errors on code positing are investigated with the zero-baseline MAT1_MATZ. The distance root mean square error (DRMS) of L1-E1 code positioning can be reduced by 48.2% with 5 GPS and Galileo satellites and the DRMS degrades quickly when the code ISB error is larger.     

基于最小熵准则的频偏估计算法研究

提出了一种基于SEM(Spectrum Entropy Minimization,频谱熵最小化)的频偏估计算法。研究发现,频偏越小,离散信号频谱的熵越小。根据这一性质建立了相关算法,通过一维搜索的方式得到使相位补偿后信号频谱熵最小的频偏估计。仿真结果表明:SEM算法的估计性能能够达到CR(Cramer-Rao,克拉美罗)下界,而且估计的稳定性和鲁棒性较好,具有一定的应用价值。     

中国股票市场中的现状偏好现象研究

理性人假设历来饱受诟病,现状偏好现象在成熟资本市场广泛存在.西方行为金融学学者提出了现状偏好理论,而该理论在我国鲜有实证支持.尝试提出了以中国股票市场的正负收益率对换手率的不对称影响来衡量现状偏好现象的理论,选择了我国2011年1月4日至2012年9月28日之间上交所和深交所挂牌的主板A股的数据进行实证分析,发现中国股票市场存在明显的现状偏好现象,并计算出该时期上交所主板A股的现状偏好系数为9.61％,上交所主板A股的现状偏好系数为11.11％.