改进PointNetLK的点云智能配准与位姿图优化方法

针对空间在轨服务任务中的非合作目标相对位姿测量问题,提出一种目标可测部位点云的智能配准方法。首先,通过Straight Through滤波算法对半物理仿真平台采集得到的点云进行目标提取,以消除背景数据等杂乱信息;其次,改进PointNetLK神经网络点云配准算法,将提取后的点云数据作为输入,从而获得初步配准结果,解决非合作目标先验信息缺失导致的无法配准问题;最后,建立基于位姿图的优化模型,以降低配准误差,提高配准精度。实验结果表明,与传统迭代最近点(ICP)算法相比,配准综合误差从6.3598降低到1.7291,精度提高约 72.81% 单次耗时从33.16 s降低到4.2 s,效率提升约87.33%,与当前SM ICP等其他算法相比,也具有一定的优势。     

基于一致关联数最大化的航迹关联算法

航迹关联(TTTA)是多传感器数据融合系统的核心模块之一,是系统误差估计和航迹融合的前提和基础。传感器存在的固有系统误差使得目标位置状态估计与真值发生偏离,容易诱发TTTA错误。传统的基于全局最小距离准则的TTTA算法,需要获得较高精度的系统误差估计,来对航迹数据进行误差补偿。针对传感器具有系统误差环境下的TTTA问题,在对TTTA进行间接评估的基础上,定义了一致关联数的概念,提出了一致关联数最大化的TTTA准则,并在稳健交替迭代的框架下完成算法设计。与距离函数不同,一致关联数是一个离散量,放松了对系统误差估计精度的要求。最后,仿真实验验证了所提算法的有效性。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Categorical Bias in Line Angle Judgments: Sex Differences and the Use of Multiple Categories

According to the Category Adjustment (CA) model, spatial estimates (e.g., of location) involve Bayesian combination across multiple, hierarchical pieces information, each weighted by its relative certainty. Recent work, though, has shown that men and women differ in terms of their certainty regarding fine-grained and categorical information in location memory. Here we demonstrate that this reflects a more general sex difference in visuospatial processing by examining bias patterns in a line angle judgment task (JLAP-15). In addition, the data suggest that multiple, hierarchical levels of categorical information influenced spatial judgments. These results imply that the hierarchical combination outlined by the CA model extends beyond two levels, and that men and women apply differential weighting to these representations.     

A systematic spatial bias in remembering eye positions

Categorical bias in location memory in geometric spaces is well established. The present study assessed the presence of the bias in locating eyes in images of human faces. Participants were presented with digital faces and indicated the position of one of the eyes in both upright and inverted orientations. Biases resulted from participants using multiple sources of accessible information. No differences were found for upright vs. inverted face images. Overall, the data were consistent with the retrieval category adjustment model. These distortions may be considered within the forensic context, when eyewitnesses work with a sketch artist or use a computer program to generate an image of the culprit.     

Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

高压脉冲电子束的控制及其对焊缝形貌影响

研制出一台150 kV/30 kW高压脉冲电子束焊机,介绍了控制脉冲束流产生的偏压脉冲电源拓扑电路结构及脉冲束流频率、占空比、束流基值、束流峰值的调节控制技术.在0~1 kHz频率范围内,该电源可输出最大幅值200 mA的脉冲电子束束流,且工艺参数调节方便.分别采用脉冲束流与连续束流电子束工艺焊接了1Cr18Ni9Ti奥氏体不锈钢,对不同工艺的焊缝形貌进行了对比分析.与连续束流电子束焊接工艺相比,采用脉冲电子束焊接工艺的焊缝熔深增加,深宽比增大;对于脉冲电子束焊接工艺,占空比给定时,随着束流频率增加,焊接缺陷减少.试验结果表明:脉冲束流频率、占空比是影响焊缝成形的关键工艺参数;脉冲调制方式控制偏压是获得高压脉冲电子束的理想控制技术之一.      

MEMS陀螺零偏温度补偿模型研究

针对MEMS陀螺工作易受温度变化影响、角速度测量输出误差大、预热时间长的问题,通过大量实验数据分析、总结规律,建立了零偏温度补偿模型,并结合最小二乘法利用多元线性回归技术对模型参数进行了辨识。对比零偏温度补偿前后的试验结果表明,经过补偿后的MEMS陀螺不但测量精度得到提高,其工程应用稳定性也得到增强。     

卫星导航信号畸变导致的测距偏差的估计方法

为定量评估导航信号的测距性能,本文研究了在轨卫星导航信号畸变导致的测距偏差估计问题。基于Vernier采样原理利用大口径抛物面天线采集在轨卫星导航信号,经数据处理获得一个伪码周期的脉冲波形。在此基础上,对该波形起点位置进行精确估计,然后根据延迟锁定环工作原理产生超前本地波形和滞后本地波形,获得E-L鉴别器曲线,最后估计鉴别器曲线的零交叉点偏差,该偏差即为卫星导航信号畸变导致的测距偏差。利用北斗卫星采集信号,获得了B1频点I支路信号的测距偏差,验证了该估计方法的正确性。     

150kV逆变电源性能优化及其束源特性

为了进一步提高电子束流发生系统工作的可靠性和稳定性,提高电子束加工质量,采用AC-DC-AC-DC-AC-DC的拓扑电路、新型功率变压器、高压脉冲检测技术、优化的束流反馈控制与灯丝加热电流闭环反馈控制技术等,分别优化了高压加速电源、偏压电源与灯丝加热电源。将所研制逆变电源与150 k V/30 k W电子枪、真空系统等组成了一套电子束流发生系统,测试了该电子束流发生系统输出的高压、最大束流以及灯丝加热电流、偏压变化对束流输出的影响。试验结果表明:经过优化的逆变电源高压输出达到-150 k V,高压输出线性度较好,最大束流达到200 m A;高压、灯丝加热电流给定时,随着偏压降低,束流输出逐渐增大;高压、偏压给定时,随着灯丝加热电流增大,束流输出存在死区、线性增大区和恒流区。