空间机械臂视觉测量技术研究

空间机械臂技术是维护空间站、执行指定任务、保障航天员出舱作业的安全等必不可少的关键技术。视觉测量技术则是保证空间机械臂顺利完成空间遥操作任务的前提。基于此前提,首先对空间机械臂视觉测量技术进行了概述,并分别对手眼关系标定、标志器识别以及相对三维位姿测量等关键技术进行了阐述;然后,以加拿大机械臂为例提出了一种基于边缘特征的标志器识别算法,给出了具体的识别流程,并采用一种基于非迭代的相对位姿测量算法实现了位姿求解;最后,针对标志器识别算法和位姿测量算法给出了基于仿真图像的实验结果和机械臂原理样机集成实验结果。最终实验结果表明:提出的空间机械臂视觉测量方法合理可行,满足预期的技术指标要求,具有较强的工程应用价值。     

用于气动导数辨识的试飞数据处理方法研究

飞行试验的测量环境十分复杂,未经处理的试飞数据直接用于飞机的气动导数辨识会降低辨识精度,甚至导致辨识的迭代过程发散或收敛到错误值。提出一套从野值剔除、数据平滑、时延修正到相容性检验的试飞数据处理方法,并将其应用到真实试飞数据的气动导数辨识中,通过对比分析数据处理前后的辨识过程和辨识结果,验证了本文提出的数据处理方法在改善辨识过程收敛特性和提高辨识精度上的有效性。     

基于子孔径处理的大斜视SAR点目标仿真

机载合成孔径雷达(SAR)平台无法在长合成孔径时间内保持理想匀速直线运动,运动参数变化较大。利用全孔径算法进行成像处理,难以高效地生成聚焦良好的图像。针对这些问题,本文通过在回波信号方位向划分子孔径,分段处理,从而得到聚焦良好的图像。为增强适用性,子孔径处理时采用大斜视角下的距离多普勒(RD)算法,同时与传统正侧视及小斜视RD算法比较。经仿真验证:无论在大斜视情况下还是在有运动误差的情况下,本文算法都能使点目标良好聚焦,点散布函数的分布显示旁瓣均低于-20 dB,满足工程使用要求,说明了算法的有效性。     

基于双轴转位机构的激光捷联惯导系统在线标定方法研究

本文主要研究了在静基座条件下,利用双轴转位机构实现激光捷联惯导系统在线标定的两个问题：（1）推导了在线标定的一种误差参数模型,明确了模型成立的条件;（2）提出了设计多位置翻滚实验的位置编排原则。此方法具有实现简单、标定时间短、精度高的特点。     

Novel passive localization algorithm based on double side matrix-restricted total least squares

In order to solve the bearings-only passive localization problem in the presence of erroneous observer position, a novel algorithm based on double side matrix-restricted total least squares (DSMRTLS) is proposed. First, the aforementioned passive localization problem is transferred to the DSMRTLS problem by deriving a multiplicative structure for both the observation matrix and the observation vector. Second, the corresponding optimization problem of the DSMRTLS problem without constraint is derived, which can be approximated as the generalized Rayleigh quotient minimization problem. Then, the localization solution which is globally optimal and asymptotically unbiased can be got by generalized eigenvalue decomposition. Simulation results verify the rationality of the approximation and the good performance of the proposed algorithm compared with several typical algorithms.     

Graph-tree-based software control flow checking for COTS processors on pico-satellites

 This paper proposes a generic high-performance and low-time-overhead software control flow checking solution, graph-tree-based control flow checking (GTCFC) for space-borne commercial- off-the-shelf (COTS) processors. A graph tree data structure with a topology similar to common trees is introduced to transform the control flow graphs of target programs. This together with design of IDs and signatures of its vertices and edges allows for an easy check of legality of actual branching during target program execution. As a result, the algorithm not only is capable of detecting all single and multiple branching errors with low latency and time overheads along with a linear-complexity space overhead, but also remains generic among arbitrary instruction sets and independent of any specific hardware. Tests of the algorithm using a COTS-processor-based onboard computer (OBC) of in-service ZDPS-1A pico-satellite products show that GTCFC can detect over 90% of the randomly injected and all-pattern-covering branching errors for different types of target programs, with performance and overheads consistent with the theoretical analysis; and beats well-established preeminent control flow checking algorithms in these dimensions. Furthermore, it is validated that GTCGC not only can be accommodated in pico-satellites conveniently with still sufficient system margins left, but also has the ability to minimize the risk of control flow errors being undetected in their space missions. Therefore, due to its effectiveness, efficiency, and compatibility, the GTCFC solution is ready for applications on COTS processors on pico-satellites in their real space missions.     

NMOHEMS探头模型的制作及实验方法研究

NMOHEMS探头设计的有效性及其运动的CFD仿真计算方法都需要实验进行检验,利用计算机辅助设计结合三维快速成型技术制作了探头模型,在实验室水箱和水库两种环境下设计并完成了模型实验。其中,水箱实验利用有限实验水深,精确调整探头质量,利用高速摄像和图像处理技术,对多个较小质量探头的下沉运动进行了精密测量,详细的误差分析和修正后,获得不同质量探头运动的下落曲线和极限速度,以调整CFD仿真计算方法;水库实验利用自主研制的实验装置,对较大质量探头的下沉运动进行测量,误差修正后的极限速度为1．923m／s,验证了探头设计的有效性。     

传感器参数误差下的运动目标TDOA/FDOA无源定位算法

在运动目标无源定位系统中，许多算法的前提是精确已知传感器的位置以及速度，但实际情况下可利用的传感器的参数均会存在一些噪声扰动。针对这一问题，提出一种改进的两步加权最小二乘（TSWLS）时差（TDOA）与频差（FDOA）定位算法。该算法是一种闭式算法并且分为2步。第1步与经典的两步加权最小二乘算法相同，第2步进一步研究了额外变量与目标参数之间的关系并且建立了新的矩阵方程。随后，利用加权最小二乘技术给出了最终解。理论分析证明了在测量噪声较小时该算法能够达到克拉美罗界（CRLB）。所提算法具有计算复杂度低，实时性高的优点；另外，经过适当的维度调整，该算法同样适用于对多非相交源进行定位求解。计算机仿真进一步证明了理论分析的正确性。     

Ground validation of space-borne satellite rainfall products in Malaysia

Precipitation studies globally is not only important to hydrological cycling, but also very crucial to satellite and terrestrial communication system designs. This work presents the validation of ground based rainfall measurement with TRMM products and GPCC data. The result shows that an error bias of ±15 % exists between the ground and satellite rainfall measurements. The study also shows that the TRMM 3B43 V6 is in good agreement with the rain gauge rainfall measurement with highest and lowest correlation coefficient of 0.9721 and 0.7791 respectively. Therefore, TRMM 3B43 V6 is recommended for use in lieu of the ground measurement in Malaysia and its environs, most importantly for sea and remote areas where rain gauge cannot cover.     

薄壁叶片叶型多工序加工检验模型建立方法

为了提高叶片的加工质量、降低叶片成品的废品率和加工成本，以航空发动机薄壁叶片数控铣削、抛光、振动光饰、喷丸强化的典型加工工艺为研究对象，提出了一种面向多工序的加工变形误差补偿方法及加工检验模型的建立方法。分析各工序的加工变形规律，将多工序变形误差作为一个整体，利用反变形误差补偿方法建立数控精铣工序的加工模型。图纸要求的理论模型只作为最终检验模型，而工序检验模型根据后续加工误差累加对最终检验模型修改得到。通过实例验证，该方法有效地降低了叶片工序检验结论的误判率，保证了工序检验合格及最终检验合格的要求。